Desiccation stress in two intertidal beachrock biofilms

Chlorophyll a fluorescence was used to look at the effect of desiccation on the photophysiology in two beachrock microbial biofilms from the intertidal rock platform of Heron Island, Australia. The photophysiological response to desiccation differed between the beachrock microbial communities. The black biofilm from the upper shoreline, dominated by Calothrix sp., showed a response typical of desiccation-tolerant cyanobacteria, where photosynthesis closed down during air exposure with a rapid and complete recovery upon rehydration. In contrast, the pink biofilm from the mid-intertidal zone, dominated by Blennothrix sp., showed no distinct response to desiccation stress and instead maintained reduced photosynthesis throughout drying and re-wetting cycles. Spatial differences in photosynthetic activity within the black biofilm were evident with a faster recovery rate of photosynthesis in the surface cyanobacteria than in the deeper layers of the biofilm. There was no variation with depth in the pink biofilm. The photophysiological differences in desiccation responses between the beachrock biofilms exemplify the ecological niche specialisation of these complex microbial communities, where the functional differences help to explain their vertical distribution on the intertidal shoreline.     

PSII activity and pigment dynamics of Symbiodinium in two Indo-Pacific corals exposed to short-term high-light stress

This study examined the capacity for photoprotection and repair of photo-inactivated photosystem II in the same Symbiodinium clade associated with two coexisting coral species during high-light stress in order to test for the modulation of the symbiont’s photobiological response by the coral host. After 4 days exposure to in situ irradiance, symbionts of the bleaching-sensitive Pocillopora damicornis showed rapid synthesis of photoprotective pigments (by 44 %) and strongly enhanced rates of xanthophyll cycling (by 446 %) while being insufficient to prevent photoinhibition (sustained loss in F _v/F _m at night) and loss of symbionts after 4 days. By contrast, Pavona decussata showed no significant changes in F _v/F _m, symbiont density or xanthophyll cycling. Given the association with the same Symbiodinium clade in both coral species, our findings suggest that symbionts in the two species examined may experience different in hospite light conditions as a result of different biometric properties of the coral host.     

Statute and legislative history of the federal insecticide,fungicide, and rodenticide act and its impact on agriculture

Abstract

This report discusses the responsibilities of government for the legislation of pesticides, and describes the impact of various statutes on the use of pesticides in agriculture. Governmental responsibilities for management of the economy, education, and enactment of laws and regulations are discussed, and the history of U.S. legislation of pesticides and related substances is presented. Finally, the impact of pesticide regulation on international trade is considered.     

SARA Title III,Section 313 —Looking Ahead

This study performed a workplace evaluation of emission control using available air sampling filters and characterized the emitted particles captured in filters. Characterized particles were contained in the exhaust gas released from carbon nanotube (CNT) synthesis using chemical vapor deposition (CVD). Emitted nanoparticles were collected on grids to be analyzed using transmission electron microscopy (TEM). CNT clusters in the exhaust gas were collected on filters for investigation. Three types of filters, including Nalgene surfactant-free cellulose acetate (SFCA), Pall A/E glass fiber, and Whatman QMA quartz filters, were evaluated as emission control measures, and particles deposited in the filters were characterized using scanning transmission electron microscopy (STEM) to further understand the nature of particles emitted from this CNT production. STEM analysis for collected particles on filters found that particles deposited on filter fibers had a similar morphology on all three filters, that is, hydrophobic agglomerates forming circular beaded clusters on hydrophilic filter fibers on the collecting side of the filter. CNT agglomerates were found trapped underneath the filter surface. The particle agglomerates consisted mostly of elemental carbon regardless of the shapes. Most particles were trapped in filters and no particles were found in the exhaust downstream from A/E and quartz filters, while a few nanometer-sized and submicrometer-sized individual particles and filament agglomerates were found downstream from the SFCA filter. The number concentration of particles with diameters from 5 nm to 20 µm was measured while collecting particles on grids at the exhaust piping. Total number concentration was reduced from an average of 88,500 to 700 particle/cm³ for the lowest found for all filters used. Overall, the quartz filter showed the most consistent and highest particle reduction control, and exhaust particles containing nanotubes were successfully collected and trapped inside this filter.

Implications: As concern for the toxicity of engineered nanoparticles grows, there is a need to characterize emission from carbon nanotube synthesis processes and to investigate methods to prevent their environmental release. At this time, the particles emitted from synthesis were not well characterized when collected on filters, and limited information was available about filter performance to such emission. This field study used readily available sampling filters to collect nanoparticles from the exhaust gas of a carbon nanotube furnace. New agglomerates were found on filters from such emitted particles, and the performance of using the filters studied was encouraging in terms of capturing emissions from carbon nanotube synthesis.     

Potential of 2, 4‐dichlorophenoxyacetic acid conjugates as promutagens in the salmonella/microsome mutagenicity test

Abstract

Hepatic S9 preparations from Aroclor 1254 induced rats and 3‐methylcholanthrene induced woodchucks were used to investigate, in vitro, the mutagenic potential of five amino acid conjugates of 2, 4‐Dichlorophenoxyacetic acid (alanine, aspartic acid, leucine, methionine and tryptophan). Five strains of Salmonella typhimurium (TA97, TA98, TA100, TA1535, TA1538) were utilized for this purpose. Dose‐response effects producing a two‐fold increase of revertants over spontaneous levels were not observed with either S9 preparation indicating that the amino acid conjugates are not promutagens in these assays.     

Persistence of granular and EC formulations of chlorpyrifos in a mineral and an organic soil incubated in open and closed containers

Abstract

Samples of a mineral soil (Plainfield sand) and an organic soil (muck) were treated with granular and EC formulations of chlorpyrifos and incubated at 27±1°C and 65±5% RH in open and closed containers. Duplicate samples of each soil‐formulation‐container combination were analyzed for residual chlorpyrifos during a 23 wk period. The disappearance rates observed demonstrate that the relative importance of formulation and containment on overall persistence depends on soil type. For the mineral soil, disappearance was slower from closed containers and formulation had only a slight effect while, in the organic soil the granular formulation disappeared slower than the EC and there was little difference between open and closed containers. The relative importance of degradation and volatilization in the disappearance of chlorpyrifos from soil is discussed.     

Methodology for Comparison of Open-Path Monitors with Point Monitors

The first measurements of a dispersed secondary pollutant (O₃) using a CO₂ laser based, open-path monitor are compared to readings from a chemiluminescence point monitor which traverses a common measurement path of 0.67 km. A statistical treatment is given which establishes the accuracy of comparison. Meteorological conditions as reflected by changes in pollutant variability are shown to influence the accuracy of comparison. The essential equivalence of data obtained by the point monitor and the path monitor is confirmed for selected measurement sequences while other measurement sequences identify non-optimized performance of the path monitor.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 4. A Three-Parameter Averaging-Time Model

Urban air pollutant concentration data often tend to fit a two-parameter averaging-time model having three characteristics: (1) pollutant concentrations are (two-parameter) lognormally distributed for all averaging times; (2) median concentrations are proportional to averaging time raised to an exponent; and (3) maximum concentrations are approximately inversely proportional to averaging time raised to an exponent. Concentration data obtained near many isolated point sources and in some urban areas often do not fit a two-parameter lognormal distribution. An increment (either positive or negative) can be added to each such concentration in order to fit the data instead to a three-parameter lognormal distribution. This increment has been incorporated as the third parameter in a new three-parameter averaging-time model that can be used in both point-source and urban settings. Examples show how this new model can be used to analyze SO₂ concentration data obtained near a point source to determine the degree of emission reduction needed to achieve the national ambient air quality standards.