Cleaner production in the management of water use at a poultry slaughterhouse of Vale do Taquari,Brazil: a case study

This study included the layout characterization for the production process of a poultry slaughterhouse using qualitative and quantitative flow charts for water management; analysis of general parameters for pollution load in the wastewater produced in critical stages of the production process and assessment of environmental impact indicators. Prognoses for cleaner production based on water management were established. The diagnostic stage revealed that the scalding, pre-chilling, separated points of wastewater disposal for the wastewater treatment plant and disposal of treated and non-reused wastewater were critical for water management. Dissolved oxygen depletion and eutrophication account for the major environmental impacts of these wastewaters, resulting in an environmental pressure index of 32.1. The opportunities for cleaner production implementation resulting from this study include the reuse of wastewaters from pre-chilling and chilling for pre-washing of carcasses, since average temperatures of these wastewaters range between 4 and 16 °C. This will contribute to lowering the oil and grease pollution load. Another strategy concerns the standardization of cleaning procedures with rational water use in all work shifts and implementation of water meters on a sector-by-sector basis. In the latter case, which has already been implemented, water consumption was reduced by 13%.     

Geotechnical Engineering Properties of Incinerator Ash Mixes

Abstract

The incineration of solid waste produces large quantities of bottom and fly ash. Landfilling has been the primary mode of disposal of these waste materials. Shortage in landfill space and the high cost of treatment have, however, prompted the search for alternative uses of these waste materials. This study presents an experimental program that was conducted to determine the engineering properties of incinerator ash mixes for use as construction materials. Incinerator ash mixes were tested as received and around optimum compacted conditions. Compaction curves, shear strength, and permeability values of fly ash, bottom ash, and their various blends were investigated. Bottom ash tends to achieve maximum dry density at much lower water content than does fly ash. The mixes displayed a change in their cohesion and friction angle values when one of the two mix components was altered or as a result of the addition of water. The permeability of bottom ash is quite comparable to that of sand. The permeability of fly ash lies in the range of those values obtained for silts and clays. A 100% bottom ash compacted at the optimum water content has a lower density value and yields a higher friction angle and cohesion values than most construction fills. This would encourage the use of bottom ash as a fill or embankment material because free drainage of water will prevent the buildup of pore water pressures.     

Prenatal diagnosis of mucolipidosis type II on first-trimester amniotic fluid

We investigated the possibility of prenatal diagnosis of mucolipidosis type II (ML II) by lysosomal enzyme determination on amniotic fluid obtained at 11 weeks of gestation in three pregnancies at risk. Diagnosis of ML II was made in one case on the basis of increased levels of five lysosomal enzymes tested. The diagnosis was confirmed on cultured chorionic cells, their cultured medium, 17–week amniotic fluid, and fetal plasma obtained for confirmation prior to the termination of pregnancy.     

Heavy metal accumulation and histomorphological alterations in Aphanius fasciatus (Pisces,Cyprinodontidae) from the Gulf of Gabes (Tunisia)

The present study illustrates an analysis of histological changes; cadmium (Cd), copper (Cu) and zinc (Zn) accumulation; and metallothionein (MT) levels in normal and deformed Mediterranean killifish, Aphanius fasciatus (Pisces, Cyprinodontidae), collected from unpolluted (S1) and polluted areas (S2) in the Gulf of Gabes in Tunisia. Metal determination in water and sediment showed that the concentrations were significantly higher (p?Histopathological investigations revealed greater changes in gills, kidney, liver, and bone tissues of fish from the polluted area than those recorded in fish from the reference area. In comparison to normal fish of the polluted area (S2), tissue alterations were more developed in deformed specimens of this site. A possible relationship between metallic pollution, incidence of spinal deformities, and histological changes in A. fasciatus in the polluted site was discussed.     

Modeling of nitrate concentration in groundwater using artificial intelligence approach—a case study of Gaza coastal aquifer

Nitrate concentration in groundwater is influenced by complex and interrelated variables, leading to great difficulty during the modeling process. The objectives of this study are (1) to evaluate the performance of two artificial intelligence (AI) techniques, namely artificial neural networks and support vector machine, in modeling groundwater nitrate concentration using scant input data, as well as (2) to assess the effect of data clustering as a pre-modeling technique on the developed models' performance. The AI models were developed using data from 22 municipal wells of the Gaza coastal aquifer in Palestine from 2000 to 2010. Results indicated high simulation performance, with the correlation coefficient and the mean average percentage error of the best model reaching 0.996 and 7 %, respectively. The variables that strongly influenced groundwater nitrate concentration were previous nitrate concentration, groundwater recharge, and on-ground nitrogen load of each land use land cover category in the well's vicinity. The results also demonstrated the merit of performing clustering of input data prior to the application of AI models. With their high performance and simplicity, the developed AI models can be effectively utilized to assess the effects of future management scenarios on groundwater nitrate concentration, leading to more reasonable groundwater resources management and decision-making     

Heavy metal levels in gonad and liver tissues—effects on the reproductive parameters of natural populations of Aphanius facsiatus

The impact of heavy metal levels (Cd, Cu, and Zn) on the reproductive parameters in natural populations of the Mediterranean killifish Aphanius fasciatus was monitored in four sites of the Tunisian coast. Our study covered a period of the reproductive cycle, from April to November 2009. The significantly higher levels of Cd, Cu, and Zn in the liver and gonads for both sexes (p?<?0.05) were observed in the most polluted site (Sfax coast). During the reproductive cycle of A. fasciatus, an unbalanced sex ratio in favor to females was observed for all the studied populations. The progression of the hepato- (HSI), gonadosomatic (GSI), and K-factor revealed a spatio-temporal variation between populations during the sampling period. Estradiol-17β amounts in the gonad tissues of females captured from the studied sites showed a significant difference, and the highest concentrations were noticed in the control site (Luza). Taking together, our data provide the first evidence of a physiologically stress and a disturbance of the reproductive status in natural populations of A. fasciatus.     

Evaluation of the Swat River,Northern Pakistan,water quality using multivariate statistical techniques and water quality index (WQI) model

Environmental Science and Pollution Research - This study evaluates the characteristics of water along the Swat River, Northern Pakistan. For this purpose, water samples (n = 30) were...     

Possible chemical causes of skeletal deformities in natural populations of Aphanius fasciatus collected from the Tunisian coast

This study attempt to quantify and identify skeletal deformities in natural populations of Aphanius fasciatus collected from the Tunisian coast and tends to found a possible relationship between these anomalies and several types of pollutants presents in the environment. Fish were collected from one reference area (S1: coast of Luza) and three polluted areas (S2: industrialized coast of Sfax, S3: coast of Khniss and S4: Hamdoun’Oued). Various patterns of skeletal deformities were diagnosed using double staining technics, and the levels of heavy metals (Cd, Cu and Zn), various polycyclic aromatic hydrocarbons (PAHs) and estrogenic compounds were determined in water and sediment from different sites. Spatio-temporal variation of the spinal deformities frequencies in A. fasciatus show that high incidence of spinal anomalies has been recorded in population collected from S2 in comparison to three other ones. Morphological results indicated that skeletal deformities of adult A. fasciatus were grouped into 13 categories that described abnormalities on spines, vertebrae, arcs and mandibles. A total of 1025 abnormalities were quantified. The results of chemical analysis showed that the levels of heavy metals and PAHs were significantly higher in S2 than in S1, S3 and S4. High level of estrogenic activity was observed only in S4. A possible correlation between environmental exposures to a mixture of pollutants in coastal waters in S2 and spinal deformities in A. fasciatus was suggested.     

Aerosol size distribution and mass concentration measurements in various cities of Pakistan

During March and April 2010 aerosol inventories from four large cities in Pakistan were assessed in terms of particle size distributions (N), mass (M) concentrations, and particulate matter (PM) concentrations. These M and PM concentrations were obtained for Karachi, Lahore, Rawalpindi, and Peshawar from N concentrations using a native algorithm based on the Grimm model 1.109 dust monitor. The results have confirmed high N, M and PM concentrations in all four cities. They also revealed major contributions to the aerosol concentrations from the re-suspension of road dust, from sea salt aerosols, and from vehicular and industrial emissions. During the study period the 24 hour average PM(10) concentrations for three sites in Karachi were found to be 461 μg m(-3), 270 μg m(-3), and 88 μg m(-3), while the average values for Lahore, Rawalpindi and Peshawar were 198 μg m(-3), 448 μg m(-3), and 540 μg m(-3), respectively. The corresponding 24 hour average PM(2.5) concentrations were 185 μg m(-3), 151 μg m(-3), and 60 μg m(-3) for the three sites in Karachi, and 91 μg m(-3), 140 μg m(-3), and 160 μg m(-3) for Lahore, Rawalpindi and Peshawar, respectively. The low PM(2.5)/PM(10) ratios revealed a high proportion of coarser particles, which are likely to have originated from (a) traffic, (b) other combustion sources, and (c) the re-suspension of road dust. Our calculated 24 hour averaged PM(10) and PM(2.5) concentrations at all sampling points were between 2 and 10 times higher than the maximum PM concentrations recommended by the WHO guidelines. The aerosol samples collected were analyzed for crustal elements (Al, Fe, Si, Mg, Ca) and trace elements (B, Ba, Cr, Cu, K, Na, Mn, Ni, P, Pb, S, Sr, Cd, Ti, Zn and Zr). The averaged concentrations for crustal elements ranged from 1.02 ± 0.76 μg m(-3) for Si at the Sea View location in Karachi to 74.96 ± 7.39 μg m(-3) for Ca in Rawalpindi, and averaged concentrations for trace elements varied from 7.0 ± 0.75 ng m(-3) for B from the SUPARCO location in Karachi to 17.84 ± 0.30 μg m(-3) for Na at the M. A. Jinnah Road location, also in Karachi.