Performance of the hybrid growth sequencing batch reactor (HG-SBR) for biodegradation of phenol under various toxicity conditions

Hybrid growth microorganisms in sequencing batch reactors have proven effective for treating the toxic compound phenol, but the toxicity effect under different toxicity conditions has rarely been discussed. Therefore, the performance of the HG-SBR under toxic, acute and chronic organic loading can provide the overall operating conditions of the system. Toxic organic loading(TOL) was monitored during the first 7 hr while introducing50 mg/L phenol to the system. The system was adversely affected with the sudden introduction of phenol to the virgin activated sludge, which caused a low degradation rate and high dissolved oxygen consumption during TOL. Acute organic loading(AOL) had significant effects at high phenol concentrations(600, 800 1000 mg/L). The specific oxygen uptake rate(SOUR) gradually decreased to 4.9 mg O_2/(g MLVSS·hr) at 1000 mg/L of phenol compared to 12.74 mg O_2/(g MLVSS·hr) for 200 mg/L of phenol. The HG-SBR was further monitored during chronic organic loading(COL) over 67 days. The effects of organic loading were more apparent at 800 mg/L and 1000 mg/L phenol concentrations, as the removal range was between 22%–30% and 18%–46% respectively, which indicated the severe effects of COL.     

Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.     

Bioaccumulation and physiological effects of mercury in Sesbania drummondii

The accumulation of mercury and its effect on growth, photosynthesis and antioxidative responses were studied in Sesbania drummondii seedlings. Mercury concentration in shoots as well as in the roots increased with increasing Hg concentrations in the growth solution. The accumulation of Hg was more in roots than shoots. At 100 mg l-1 Hg concentration, shoots accumulated 998 mg Hg kg -1 dry weight (dw) while roots accumulated 41,403 mg Hg kg-1 dw. Seedlings growth was not significantly affected at lower concentrations of Hg. A concentration of 100 mg l-1 Hg inhibited growth by 36.8%, with respect to control. Photosynthetic activity was assessed by measuring chlorophyll a fluorescence by determination of Fv/Fm and Fv/Fo values. Photosynthetic integrity was not affected up to 50 mg l-1 Hg concentration, however, concentrations higher than 50 mg l-1 affected photosynthetic integrity. Sesbania responded to Hg induced oxidative stress by modulating non-enzymatic antioxidants [glutathione (GSH) and non-protein thiols (NPSH)] and enzymatic antioxidants: superoxide dismutase (SOD), ascorbate peroxidase (APX) and glutathione reductase (GR). Glutathione content and GSH/GSSG ratio increased up to a concentration of 50 mg l-1 while slight down at 100 mg l-1 Hg. The content of NPSH significantly increased with increasing Hg concentrations in the growth medium. The activities of antioxidative enzymes, SOD, APX and GR followed the same trends as antioxidants first increased up to a concentration of 50 mg l-1 Hg and then slight decreased. The results of present study suggest that Sesbania plants were able to accumulate and tolerate Hg induced stress using an effective antioxidative defense mechanisms.     

Impacts of and adaptation to climate change on the oil palm in Malaysia: a systematic review

Environmental Science and Pollution Research - The interaction and the interplay of climate change with oil palm production in the Southeast Asia region are of serious concern. This particularly...     

Baseline study of methane emission from open digesting tanks of palm oil mill effluent treatment

Anthropogenic release of greenhouse gases, especially CO₂ and CH₄ has been recognized as one of the main causes of global warming. Several measures under the Kyoto Protocol 1997 have been drawn up to reduce the greenhouse gases emission. One of the measures is Clean Development Mechanisms (CDM) that was created to enable developed countries to cooperate with developing countries in emission reduction activities. In Malaysia, palm oil industry particularly from palm oil mill effluent (POME) anaerobic treatment has been identified as an important source of CH₄. However, there is no study to quantify the actual CH₄ emission from the commercial scale wastewater treatment facility. Hence, this paper shall address the CH₄ emission from the open digesting tanks in Felda Serting Hilir Palm Oil Mill. CH₄ emission pattern was recorded for 52 weeks from 3600 m³ open digesting tanks. The findings indicated that the CH₄ content was between 13.5% and 49.0% which was lower than the value of 65% reported earlier. The biogas flow rate ranged between 0.8 l min⁻¹ m⁻² and 9.8 l min⁻¹ m⁻². Total CH₄ emission per open digesting tank was 518.9 kg day⁻¹. Relationships between CH₄ emission and total carbon removal and POME discharged were also discussed. Fluctuation of biogas production was observed throughout the studies as a result of seasonal oil palm cropping, mill activities, variation of POME quality and quantity discharged from the mill. Thus only through long-term field measurement CH₄ emission can be accurately estimated.     

Postural assessment in pen-and-paper-based observational methods and their associated health effects: a review

Introduction. This review describes standardized ergonomics assessment based on pen-and-paper observational methods for assessing ergonomics risk factors. Objective. The three main objectives are to analyze published pen-and-paper observational methods, to extract and understand the risk levels of each method and to identify their associated health effects. Methodology. The authors searched scientific databases and the Internet for materials from 1970 to 2013 using the following keywords: ergo, posture, method, observational, postural angle, health effects, pain and diseases. Postural assessments of upper arms, lower arms, wrists, neck, back and legs in six pen-and-paper-based observational methods are highlighted, extracted in groups and linked with associated adverse health effects. Results. The literature reviewed showed strengths and limitations of published pen-and-paper-based observational methods in determining the work activities, risk levels and related postural angles to adverse health effects. This provided a better understanding of unsafe work postures and how to improve these postures. Conclusion. Many pen-and-paper-based observational methods have been developed. However, there are still many limitations of these methods. There is, therefore, a need to develop a new pen-and-paper-based observational method for assessing postural problems.     

Photocatalytic degradation of ciprofloxacin in aqueous media: a short review

The frequent detection of antibiotics such as ciprofloxacin in surface and drinking waters around the world has attracted concern from various researchers. Such presence is an indication that the decontamination of water polluted by antibiotics is beyond the conventional treatment methods. However, among the different treatment methods that have been developed in the area of water purification, heterogeneous photocatalysis using semiconductor as a mediator has been rated as an efficient and a green wastewater treatment method. This is because, the process is effective in degrading and mineralizing organic pollutants, using UV or visible light. The present review paper covers a brief survey over a range of publications in the last decade, involving photocatalytic materials that have been employed in the purification of water contaminated by ciprofloxacin.     

Removal of Remazol Brilliant Violet-5R dye using periwinkle shells

The purpose of this research is to obtain optimal processing conditions for the adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye onto activated carbon prepared from periwinkle shells (PSAC) by chemical activation with KOH using response surface methodology. Central composite design (CCD) was used to determine the effects of three preparation variables; CO₂ activation temperature, CO₂ activation time and KOH:char impregnation ratio (IR) on two responses; percentage RBV-5R dye removal and PSAC yield. Based on the CCD, two quadratic models were developed for percentage RBV-5R dye removal and PSAC yield, respectively. The most influential factor on each experimental design response was identified from the analysis of variance (ANOVA). The optimum conditions for the adsorption of RBV-5R dye onto PSAC were CO₂ activation temperature of 811 °C, CO₂ activation time of 1.70 h and IR of 3.0, resulting in 81.28% RBV-5R dye removal and 28.18% PSAC yield. PSAC prepared under optimum conditions was mesoporous with a Brunauer–Emmett–Teller surface area of 1894 m²·g^?1, total pore volume of 1.107 cm³·g^?1 and average pore diameter of 2.32 nm. The surface morphology and functional groups of the activated carbon were respectively determined from the scanning electron microscopy and Fourier transform infrared analysis.     

Free radical-assisted electrocoagulation processes for wastewater treatment

The combination of electrocoagulation with another process is a promising approach to enhance the removal efficiency of water pollutants. For instance, free radical-assisted electrocoagulation is a new combination showing higher performance. There are different combinations depending on the free radical source. This article reviews free radical-assisted electrocoagulation processes. We discuss electrocoagulation mechanisms; ozone-assisted electrocoagulation processes; advanced oxidation-assisted electrocoagulation processes; and ultrasound-assisted electrocoagulation. We present kinetic models used in free radical-assisted electrocoagulation, scale-up of free radical-assisted electrocoagulation and cost estimation. The major points are: most of the available studies have been done at laboratory scale with synthetic wastewater, and lack holistic and systematic approaches to consider the process complexity. The performance of the combined process is improved, and the removal efficiency is increased especially with ozone-assisted electrocoagulation, which gives a removal efficiency of more than 95%. The use of ultrasound energy with electrocoagulation is advantageous in reducing the problem of electrode passivation.     

Inherent risk assessment methodology in preliminary design stage: A case study for toxic release

At preliminary design stage, process designers normally lack of information on the risk level from process plant. An inherently safer process plant could be designed if the information of risk levels could be known earlier at the preliminary design stage. If the risk level could be determined, there is a possibility to eliminate or reduce the risk by applying the well-known concept: inherent safety principle. This paper presents a technique to determine the risk levels at preliminary process design stage using a 2-region risk matrix concept. A model to calculate the severity and likelihood of a toxic release accident was developed in Microsoft Excel spreadsheet. This model is integrated with process design simulator, iCON to allow for data transfer during preliminary design stage. 2-region risk matrix is proposed and used to evaluate the acceptability of the inherent risk based on the severity and likelihood rating. If the inherent risk level is unacceptable, modification for improvement can be done using the inherent safety principles. A case study has been carried out to illustrate the benefit of applying this newly developed technique. It was successfully shown that an inherently safer plant could easily be designed by applying this technique.