Analytical study on the suitability of using bentonite coated gravel as a landfill liner material

This study investigates the feasibility of using bentonite coated gravel (BCG) as a liner material for waste landfills. BCG has proven to be a very effective capping material/method for the remediation of contaminated sediments in aquatic environments. The concept of BCG is similar to that of peanuts/almonds covered with chocolate; each aggregate particle has been covered with the clayey material. Laboratory tests were aimed at evaluating regulated and non-regulated factors for liner materials, i.e., permeability and strength. Tests included X-ray diffraction, methylene blue absorption, compaction, free swelling, permeability, 1D consolidation, triaxial compression and cone penetration. The compactive efforts used for this study were the reduced Proctor, standard Proctor, intermediate Proctor, modified Proctor and super modified Proctor. The compactive energy corresponding to each effort, respectively, is as follows: 355.5, 592.3, 1196.3, 2693.3, and 5386.4 kJ/m(3). Results revealed that even though aggregate content represents 70% of the weight of the material, hydraulic conductivities as low as 6 x 10(-10)cm/s can be achieved when proper compactive efforts are used. Compressibility is very low for this material even at low (or no) compactive efforts. Results also demonstrated how higher compactive efforts can lower the permeability of BCG; however, over-compaction creates fractures in the aggregate core of BCG that could increase permeability. Moreover, higher compactive efforts create higher swelling pressures that could compromise the performance of a barrier constructed using BCG. As a result of this study, moderate compactive efforts, i.e., intermediate Proctor or modified Proctor, are recommended for constructing a BCG barrier. Using moderate compactive efforts, very low hydraulic conductivities, good workability and good trafficability are easily attainable.     

Characteristics of environmental factors and their effects on CH4 and CO2 emissions from a closed landfill: An ecological case study of Shanghai

To elucidate the influence of landfill gas (LFG) emission on environmental factors, an ecological investigation that was primarily concerned with the characteristics of vegetation, cover soil, and solid waste in the landfill was carried out. Temporal and spatial variations in vegetation diversity and coverage and their effects on reducing the emission of methane in the landfill were investigated. The results showed that both vegetation coverage and diversity increased with elapsed landfill closure time. The transition trend of the vegetation species was from perennial plant (Phragmites australis) to annual plants. Perennial vegetation was the dominant type of vegetation during the early closure period, and annual vegetation coverage increased with closure time. Vegetation preferentially appeared in areas of comparatively high depth of cover soil, which was characterized by high moisture retentiveness that enabled vegetation growth. The concentrations of methane and carbon dioxide in the cover soil significantly decreased with increasing closure time. The concentrations of methane and carbon dioxide from bare cover soil were higher than those from vegetated cover soil whereas the CO₂ flux of bare cover soil was less than that of vegetated cover soil.     

Impacts of natural weathering on the transformation/neoformation processes in landfilled MSWI bottom ash: a geoenvironmental perspective

Natural weathering processes are significant mechanisms that noticeably affect the fundamental nature of incineration ash residues. To provide a greater understanding of these processes, a MSWI (mono)landfill site in the north east of the US was selected as the target for systematic investigation of the natural weathering of bottom ash residues. Samples of various ages were collected from locations A (1 yr), B (10 yrs), C (13-14 yrs) and D (20 yrs) of the landfill in 2009. We investigated the phase transformation of the collected bottom ash particles, neoformation processes as well as the behavior and distribution of certain heavy metals (Cu, Pb, Zn, Ni, and Cr) in the neoformed phases using optical microscopy, SEM-EDX, and bulk examinations. Key findings: at the preliminary stage, the waste metallic particles (Al, Fe, and Cu) and unstable minerals such as lime, portlandite, ettringite and hydrocalumite convert to oxide and hydroxide (hydrate) phases, calcite, alumina gel and gypsum. At the intermediate stage, the decomposition of melt products including magnetite spinels and metallic inclusions is triggered due to the partial dissolution of the melt glass. At the longer time horizon it is possible to track the breakdown of the glass phase, the extensive formation of calcite and anhydrite, Al-hydrates and more stable Fe-hydrates all through the older ash deposits. Among the dominant secondary phases, we propose the following order based on their direct metal uptake capacity: Fe-hydrates>Al-hydrates>calcite. Calcite was found to be the least effective phase for the direct sorption of heavy metals. Based on overall findings, a model is proposed that demonstrates the general trend of ash weathering in the landfill.     

Organic acids and aldehydes in throughfall and dew in a Japanese pine forest

We analyzed low molecular weight organic acids and aldehydes in throughfall under pine forest, and organic acids in dew on chemically inert surfaces and pine needle surfaces at urban- and mountain-facing sites of pine forest in western Japan. Low molecular weight organic acids and aldehydes accounted for less than 5% of the dissolved organic carbon in throughfall at both sites. Formaldehyde at both sites and formate at the mountain-facing site were found at significantly lower concentrations in throughfall than in rainfall, which may be explained by the degradation and/or retention of these components by the pine canopy as the incident precipitation passed through it. The oxalate concentration in throughfall was significantly higher than those in rainfall at both sites, suggesting that oxalate was derived from leaching from the pine foliage. At both sites, organic acid concentrations were higher in dew on the pine needles than in throughfall or dew on chemically inert surfaces. This could be due to the long contact time of dew on pine needles, during which leached substances from pine needles and dry deposits accumulated on their surfaces can dissolve into the small volume of dew. The role of enhanced concentrations of oxalate in an aqueous phase on the plant surfaces (e.g., dew) is discussed in relation to hydroxyl radical formation via the photo-Fenton reaction.     

A novel cell division factor from tobacco 2B-13 cells that induced cell division in auxin-starved tobacco BY-2 cells

Effects of auxin as plant hormones are widespread; in fact in almost all aspects of plant growth and development auxin plays a pivotal role. Although auxin is required for propagating cell division in plant cells, its effect upon cell division is least understood. If auxin is depleted from the culture medium, cultured cells cease to divide. It has been demonstrated in this context that the addition of auxin to auxin-starved nondividing tobacco BY-2 cells induced semisynchronous cell division. On the other hand, there are some cell lines, named habituated cells, that can grow without auxin. The cause and reason for the habituated cells have not been clarified. A habituated cell line named 2B-13 is derived from the tobacco BY-2 cell line, which has been most intensively studied among plant cell lines. When we tried to find the difference between two cell lines of BY-2 and 2B-13 cells, we found that the addition of culture filtrated from the auxin-habituated 2B-13 cells induced semisynchronous cell division in auxin-starved BY-2 cells. The cell division factor (CDF) that is responsible for inducing cell division in auxin-starved BY-2 cells was purified to near-homogeneity by sequential passage through a hydroxyapatite column, a ConA Sepharose column and a Sephadex gel filtration column. The resulting purified fraction appeared as a single band of high molecular weight on sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels by silver staining and was able to induce cell division in auxin-starved BY-2 cells. Identification of the protein by MALD-TOF-MS/MS revealed that it is structurally related to P-glycoprotein from Gossypioides kirkii, which belongs to ATP-binding cassette (ABC)-transporters. The significance of CDF as a possible ABC-transporter is discussed in relationship to auxin–autotrophic growth and auxin-signaling pathway.     

Leaching of heavy metals in acid mine drainage.

Acid mine drainage is one of the most serious environmental problems that the coal and metal mining industry is currently facing. The generation of low pH drainage enhances the dissolution of heavy metals in water. The samples used in this research originated from three pits at mine dumps. In a study reported in this paper, three types of tests; namely static test, kinetic test and column test were conducted to estimate acid generation and acid neutralization reaction rates, and to predict the solubility of metals and their release rates. Static test showed that all samples had a pH of net acid generation (NAG pH) <4, a net acid producing potential (NAPP) >10 kg H2SO4tonne(-1), and a S-content >3%, which can be classified as a high acid-forming capacity. Simulated runoff in the column tests was equivalent to 5-year average rainfall in Indonesia, the resultant leachates showed acidic behaviour (pH < 3.5). Based on the results, it was found that high mobilization of heavy metals (Cr, Cu, Zn, Cd and Pb) takes place under strong acidic conditions (pH approximately equal 2).     

Local Circulation with Aeolian Dust on the Slopes and Foot Areas of the Tianshan and Kunlun Mountains around the Taklimakan Desert, China

Four automatic weather stations (AWS) were installed on the slopes and foot areas of the Tianshan and Kunlun Mountains along a longitude of 80 degrees east: (1) Taglak 2400 m a.s.l., (2) Aksu 1000 m, (3) Kartash 2800 m, and (4) Qira 1700 m. These two slopes face the Taklimakan Desert. Tagliak lies on the southern slope of Tianshan, and Kartash on the northern slope of Kunlun. The meteorological characteristics of the mountainous regions were investigated using surface data obtained during an intensive observation period (IOP) in spring 2002. It was found that visibility on the slopes decreases in the daytime, and there is no relationship between visibility and wind speed in the mountainous areas. Two snow layers containing dust particles were observed in the snow cover in Taglak during the IOP in spring 2003. These results suggest that a warm air parcel containing aeolian dust climbs over the slopes of the mountainous areas, and dust particles in the mountainous areas are transported from the foot areas.     

The role of metals in dioxin formation from combustion of newspapers and polyvinyl chloride in an incinerator

Newspapers impregnated with NaCl mixed with various chloride metals (CuCl2, MgCl2, MnCl2, FeCl3, NiCl2, and CoCl2) and electric wire coated with polyvinyl chloride (PVC) were combusted in a well-controlled incinerator. Exhaust gas samples collected at the outlet of the incinerator were analyzed for dioxins (PCDDs, PCDFs, and coplanar PCBs) by gas chromatography/mass spectrometry. The amount of total dioxins formed from newspaper samples ranged from 34.2 ng/g (with NaCl+CoCl2) to 67.0 ng/g (with NaCl+CuCl2). PCDFs composed 88-94% of the total dioxins formed in the exhaust gases. The highest levels of PCDF isomers obtained were Cl3-CDF from the sample with NaCl+CuCl2 (14.8 ng/g), Cl2-CDF from the sample with NaCl+MgCl2 (12.3 ng/g), and Cl(1)-CDF from samples with NaCl+MnCl2 (12.6 ng/g), with NaCl+FeCl3 (11.8 ng/g), and with NaCl+NiCl2 (13.3 ng/g), and with NaCl+CoCl2 (8.62 ng/g). The total of Cl4-8-CDDs comprised 76-88% of the total Cl1-8-CDDs. In particular, Cl7-CDDs had the highest levels except for the sample with NaCl+NiCl2. Total dioxins formed from samples of electric wire coated with PVC and PVC alone were 38.3 ng/g and 112 ng/g, respectively, suggesting that the presence of copper reduced dioxin formation.     

Influence of H<Subscript>2</Subscript> on the decomposition of halides by nonthermal plasma incorporated with in situ alkaline absorption

To control the emission of halides into the environment, an experiment on the nonthermal plasma decomposition of the halides CF₄, CHF₃, C₂HCl₃, and CHClF₂ was conducted in a wire-in-tube corona reactor. It was found that the decomposition of C₂HCl₃ and CHClF₂ was easy compared with the decomposition of CF₄ and CHF₃. With the addition of H₂ in N₂ gas, the decomposition ratio of CF₄, C₂HCl₃, and CHClF₂ increased. In contrast, the decomposition ratio of CHF₃ in a hydrogen-rich atmosphere was lower than that in an N₂ atmosphere. It was demonstrated that the yields of HF and/or HCl formed during halide decomposition clearly increased in the presence of H₂ in N₂ gas. Furthermore, in order to prevent the production of unwanted products from halide decomposition, a combination of plasma decomposition and in situ alkaline absorption was devised by coating a layer of Ca(OH)₂ onto the surface of the grounding electrode. It was demonstrated that the Ca(OH)₂ sorbent played an effective role as a scavenger, participating in halide decomposition by capturing reaction products such as HCl and HF, therefore resulting in increased halide decomposition.     

Effect of ultraviolet-absorbing vinyl film on organophosphorus insecticides dichlorvos and fenitrothion residues in spinach

Dichlorvos and fenitrothion residues found in spinach grown in greenhouse covered either by regular vinyl film or UV-absorbing vinyl film (UV-A) were analyzed by gas chromatography. After one day, dichlorvos residues in spinach covered with regular vinyl film and UV-A degraded by 97% and 80%, respectively, and degraded 100% after three days covered with regular vinyl film and six days covered with UV-A. After three days, fenitrothion residue in spinach covered with regular vinyl film degraded by 72% and then by 97% after six days; residue in spinach covered with UV-A degraded by 50% after three days and by 95% after six days. These results indicate that UV-A used to prevent the occurrence of insects and fungi in greenhouses reduced the degradation rates of dichlorvos and fenitrothion.