Physiological and biochemical mechanisms of spermine-induced cadmium stress tolerance in mung bean (<Emphasis Type="Italic">Vigna radiata</Emphasis> L.) seedlings

The role of exogenous spermine (0.25 mM Spm, a type of polyamine (PA) in reducing Cd uptake and alleviating Cd toxicity (containing 1 and 1.5 mM CdCl₂ in the growing media) effects was studied in the mung bean (Vigna radiata L. cv. BARI Mung-2) plant. Exogenously applied Spm reduced Cd content, accumulation, and translocation in different plant parts. Increasing phytochelatin content, exogenous Spm reduced Cd accumulation and translocation. Spm application reduced the Cd-induced oxidative damage which was reflected from the reduction of H₂O₂ content, O₂ ^?– generation rate, lipoxygenase (LOX) activity, and lipid peroxidation level and also reflected from the reduction of spots of H₂O₂ and O₂ ^?– from mung bean leaves (compared to control treatment). Spm pretreatment increased non-enzymatic antioxidant contents (ascorbate, AsA, and glutathione, GSH) and activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), and glutathione reductase (GR) which reduced oxidative stress. The cytotoxicity of methylglyoxal (MG) is also reduced by exogenous Spm because it enhanced glyoxalase system enzymes and components. Through osmoregulation, Spm maintained a better water status of Cd-affected mung bean seedlings. Spm prevented the chl damage and increased its content. Exogenous Spm also modulated the endogenous free PAs level which might have the roles in improving physiological processes including antioxidant capacity, osmoregulation, and Cd and MG detoxification capacity. The overall Spm-induced tolerance of mung bean seedlings to Cd toxicity was reflected through improved growth of mung bean seedlings.     

Diurnal and Weekday Variations in the Source Contributions of Ozone Precursors in California’s South Coast Air Basin

Abstract

For at least 30 years, ozone (O₃) levels on weekends in parts of California’s South Coast (Los Angeles) Air Basin (SoCAB) have been as high as or higher than on weekdays, even though ambient levels of O₃ precursors are lower on weekends than on weekdays. A field study was conducted in the Los Angeles area during fall 2000 to test whether proposed relationships between emission sources and ambient nonmethane hydrocarbon (NMHC) and oxides of nitrogen (NO_x) levels can account for observed diurnal and day-of-week variations in the concentration and proportions of precursor pollutants that may affect the efficiency and rate of O₃ formation. The contributions to ambient NMHC by motor vehicle exhaust and evaporative emissions, estimated using chemical mass balance (CMB) receptor modeling, ranged from 65 to 85% with minimal day-of-week variation. Ratios of ambient NO_x associated with black carbon (BC) to NO_x associated with carbon monoxide (CO) were approximately 1.25 ± 0.22 during weekdays and 0.76 ± 0.07 and 0.52 ± 0.07 on Saturday and Sunday, respectively. These results demonstrate that lower NO_x emissions from diesel exhaust can be a major factor causing lower NO_x mixing ratios and higher NMHC/NO_x ratios on weekends. Nonmobile sources showed no significant day-of-week variations in their contributions to NMHC. Greater amounts of gasoline emissions are carried over on Friday and Saturday evenings but are, at most, a minor factor contributing to higher NMHC/NO_x ratios on weekend mornings.     

硫酸盐木浆厂蒸发冷凝水的厌氧处理试验研究

硫酸盐木浆厂排出的蒸发冷凝水具有高温、高浓度、营养物质含量低等特点,并含有一定浓度的挥发性恶臭硫化合物.本研究采用空气吹脱-UASB流程处理此类废水.结果表明,70%～80%的挥发性有机硫化物能够在气提过程中被去除.除硫后的蒸发冷凝水在UASB反应器中能够得到有效处理,当COD容积负荷达到30 kg·(m³.d)^-1时,COD去除率仍能保持在95%左右.另一方面,试验开始时接种的颗粒污泥在反应器中破碎并逐渐被新形成的颗粒污泥代替,扫描电镜观察显示,新形成的颗粒污泥具有与接种污泥不同的微生物相.     

高硫酸盐难降解废水高温厌氧处理中限量曝气的应用及影响

由于硫酸盐还原的影响,普通高温UASB反应器处理亚硫酸盐纸浆厂排出的高硫酸盐难降解废水过程中甲烷菌活性受到了严重抑制.考虑到空气对硫化氢的吹脱和对硫化物的氧化作用可能减轻硫化物对甲烷菌的抑制,本研究在厌氧反应器中引入限量曝气措施.试验结果表明,反应器的运行稳定性和处理能力均得到大幅提高.在有机负荷提高到原来2倍的情况下,曝气后COD去除率仍有提高,从40%～50%提高到60%～70%.试验证明部分甲烷菌可以耐氧,而某些种类的水解酸化细菌则对不完全厌氧环境比较敏感.     

Regional medical waste management in China: a case study of Shenyang

Medical waste management is of great importance due to its potential environmental and public health risks, especially in developing countries where both financial and technological resources on medical waste management are still lacking. Although many studies have focused on country-scaled medical waste management, few have paid close attention to regional (city-scale) management, particularly in China. This paper fills such a gap by employing a case study approach. Due to its representative nature, Shenyang was selected as the case study. After a review of China’s medical waste management, an empirical study in Shenyang was conducted in order to analyze the current state as well as identify key challenges on regional medical waste management. Based upon the local realities and aiming to better manage medical wastes, an integrated medical waste management framework is developed. Such a platform encourages the establishment of a specific medical waste management authority, a city scaled capacity building program on improving the general public’s awareness, an information platform, application of state-of-the-art technologies, as well as creation of an effective financial system. The combination of such initiatives can significantly improve the overall eco-efficiency of medical waste management at the regional level and should be promoted to other developing cities.     

Comparison of the MOVES2010a,MOBILE6.2, and EMFAC2007 mobile source emission models with on-road traffic tunnel and remote sensing measurements

The Desert Research Institute conducted an on-road mobile source emission study at a traffic tunnel in Van Nuys, California, in August 2010 to measure fleet-averaged, fuel-based emission factors. The study also included remote sensing device (RSD) measurements by the University of Denver of 13,000 vehicles near the tunnel. The tunnel and RSD fleet-averaged emission factors were compared in blind fashion with the corresponding modeled factors calculated by ENVIRON International Corporation using U.S. Environmental Protection Agency's (EPA's) MOVES2010a (Motor Vehicle Emissions Simulator) and MOBILE6.2 mobile source emission models, and California Air Resources Board's (CARB's) EMFAC2007 (EMission FACtors) emission model. With some exceptions, the fleet-averaged tunnel, RSD, and modeled carbon monoxide (CO) and oxide of nitrogen (NO_x) emission factors were in reasonable agreement (±25%). The nonmethane hydrocarbon (NMHC) emission factors (specifically the running evaporative emissions) predicted by MOVES were insensitive to ambient temperature as compared with the tunnel measurements and the MOBILE- and EMFAC-predicted emission factors, resulting in underestimation of the measured NMHC/NO_x ratios at higher ambient temperatures. Although predicted NMHC/NO_x ratios are in good agreement with the measured ratios during cooler sampling periods, the measured NMHC/NO_x ratios are 3.1, 1.7, and 1.4 times higher than those predicted by the MOVES, MOBILE, and EMFAC models, respectively, during high-temperature periods. Although the MOVES NO_x emission factors were generally higher than the measured factors, most differences were not significant considering the variations in the modeled factors using alternative vehicle operating cycles to represent the driving conditions in the tunnel. The three models predicted large differences in NO_x and particle emissions and in the relative contributions of diesel and gasoline vehicles to total NO_x and particulate carbon (TC) emissions in the tunnel.

Implications: Although advances have been made to mobile source emission models over the past two decades, the evidence that mobile source emissions of carbon monoxide and hydrocarbons in urban areas were underestimated by as much as a factor of 2–3 in past inventories underscores the need for on-going verification of emission inventories. Results suggest that there is an overall increase in motor vehicle NMHC emissions on hot days that is not fully accounted for by the emission models. Hot temperatures and concomitant higher ratios of NMHC emissions relative to NO_x both contribute to more rapid and efficient formation of ozone. Also, the ability of EPA's MOVES model to simulate varying vehicle operating modes places increased importance on the choice of operating modes to evaluate project-level emissions.     

Fabric-filter-supported catalyst for removal of harmful solid and gaseous compounds in municipal waste incinerator exhaust gas: characteristics of NO x reduction

We have investigated a fabric-filter-supported catalyst for removing harmful solid and gaseous compounds simultaneously from municipal incinerator exhaust gas. We studied the ways in which the efficiency of NO _x removal is influenced by filter temperature, gas flow rate, and catalyst content. The reduction of the catalyst content by mechanical reverse washing was investigated, and the state of the catalyst supported in the fabric filter was also observed using a scanning electron microscope. The catalyst supported by the fabric filter showed a removal efficiency above 75% when the filter temperature was 200°C, the gas flow rate was 1 m/min, and the catalyst content of the fabric filter was above 300 g/m². The catalyst was supported uniformly on the fibers of the fabric filter, and fine catalyst particles remained on the fibers after mechanical reverse washing. Received: October 15, 1997 / Accepted: March 19, 1999     

Observation and characterization of colloids derived from leached cement hydrates

The possibility of colloid generation from cement hydrates in a cementitious repository environment has been investigated through leaching experiments. Pulverized samples of High Flyash and Silica fume-content Cement (HFSC) and 1:9 ordinary portland cement/blast furnace slag (1:9 OPC/BFS) hydrate were leached in low-salinity groundwater at three solid-to-liquid (S/L) mass ratios (1:5, 1:50 and 1:100), and two temperatures (20 and 60 degrees C) for durations of nearly 2 and 8 months. Detailed characterization of colloid populations has been undertaken by TEM coupled with X-ray analysis. In addition, the surface charge and stability behavior of colloids have been investigated. The colloid concentrations in HFSC hydrate leachates generated at 20 and 60 degrees C show similar trends with S/L ratio. The colloid concentrations of leachates with the lower S/L ratio (1:50 and 1:100) are in the range of 10(11)-10(12) particles per liter. The majority of these particles are composed predominantly of Si, Ca, and Al; the mean particle size is less than 100 nm. The lowest colloid concentrations are found in the leachates with the highest S/L ratios, and the colloid populations tend to be dominated by larger particles. HFSC-derived colloid stability is due to a high negative zeta potential at alkaline pH values, combined with a calcium concentration that is below the critical coagulation concentration (CCC) for the colloids. A preliminary interpretation of HFSC-derived colloid stability based on classical DLVO theory provides a semi-quantitative explanation of the dependence of colloid populations on the S/L ratio in the leaching experiments.     

Estrogenic chemicals and estrogenic activity in leachate from municipal waste landfill determined by yeast two-hybrid assay

Estrogenic activity and estrogenic chemicals in landfill leachate were investigated by yeast two-hybrid assay and chemical analysis. Leachate sample extracted by liquid-liquid extraction with dichloromethane at pH 7.0 showed a higher dose-response curve than sample extracted at pH 3.0. or than sample extracted by solid phase extraction at either pH 7.0 or 3.0. The fraction extracted at pH 3.0 specifically inhibited not only growth of yeast but also estrogenic activity in this assay, suggesting that it contained anti-estrogenic chemicals. The greatest contributor to estrogenic activity among the chemicals identified in leachate extract was bisphenol A, with an estimated contribution ratio of 84%. The contribution ratios of 4-nonyl phenol (4-np) and 4-tert-octyl phenol (4-t-op) were estimated at 1.0%, and 0.1%, respectively, while natural estrogens such as 17beta-estradiol or estrone were below detection limit, so that their contribution ratio was estimated at no more than 10%. The estrogenic activity of leachate was decreased by aeration treatment alone after 7 days, and was no longer detected after 22 days. Concentrations of bisphenol A, 4-np and 4-t-op likewise decreased with aeration.