Biogenic Sulfur Gas Emissions from Soils in Eastern and Southeastern United States

Data are presented for the first systematic measurements of biogenic sulfur gas flux from the major soil orders within the eastern and southeastern United States. Sulfur flux samples were collected and analyzed on-site during the fall of 1977, spring and summer of 1978 and summer of 1979. A total of 27 sampling locales in 17 states were examined. Eight additional sites were visited in 1980.

At some locales, two to four soils were examined, providing an even broader sampling of the soil orders. Three of the locales were revisited two or three times during the course of the study to establish the influence of seasonal climatology upon the measured emission rates and chemical composition of the sulfur flux mixtures.

The sulfur gas enhancement of sulfur-free sweep air passing through dynamic emission flux chambers placed over selected sampling areas was determined by combined cryogenic enrichment sampling and wall-coated, open tubular, capillary column, cryogenic gas chromatography (WCOT/GC) using a sulfur selective, flame photometric detector (FPD).

Sulfur gas mixtures varied with soil order, ambient temperature, insolation, soil moisture, cultivation, and vegetative cover. Statistical analyses indicated strong temperature and soil order relationships for sulfur emissions from soils.

Fluxes ranged from 0.001 g to 1940 g of total sulfur as S/m²/yr. The calculated mean annual sulfur flux, weighted by soil order, was 0.03 g S/m²/yr for the study land area, or 110,872 metric tons (mT). The estimated annual average sulfur flux increased from 65 mT per 6400 km² for the land grids in the northernmost east-west grid tier to an average 1800 mT for the land grids in the southern Florida grid tiers.

This systematic sampling of major soils provides a much broader data base for estimating biogenic sulfur flux than previously reported for isolated intertidal sites, and presents the first sulfur flux estimates for inland soils which make up approximately 93% of the land of the eastern United States.     

An Assessment of the Economic Effects of Ozone on U.S. Agriculture

Past attempts to measure the economic consequences of ozone on agriculture have been based on limited plant science information. This paper reports on an economic assessment of ozone on U.S. agriculture using recent crop response data from the National Crop Loss Assessment Network (NCLAN). The results are derived from a U.S. agricultural sector model that includes major crop and livestock production as well as domestic consumption, livestock feeding and export uses. The economic effects of four hypothetical ambient ozone levels are investigated. The analysis Indicates that the benefits to society of moderate (25%) ozone reductions are approximately $1.7 billion. A 25% Increase in ozone pollution results in costs (negative benefits) of $2.1 billion. These estimates do not reflect compliance costs of achieving the ozone changes and hence are not net benefits.     

Assessment of Presence of Heavy Metals and Other Pollution Burden Parameters and Their Effect on Water Quality in Benin City,Edo State

An assessment of the heavy metal content and biological pollution burden of an abattoir dumpsite, an automobile carwash, the Ikpoba River, and a private water borehole located near the abattoir dumpsite was conducted in Benin City in Southern Nigeria, during the rainy and dry seasons. The water samples’ pH was lower than the permissible values, with the river water displaying color and possessing a slight odor. Iron concentrations exceeded the permissible limits for drinking water at all four of the sampling stations in the study area, although not in samples collected from the control station, station 5, a public water borehole that is located some distance away. Lead values were higher than drinking water standards in the samples collected from stations 1 through 4, with some exceptions during the rainy season. Copper, nickel, arsenic, chromium, and aluminum were detected in three out of the four sampling stations located within the study area. However, these metals were detected at levels that were within regulatory limits. The detection of three metals (iron, lead, and zinc) within the study area at levels exceeding drinking water limits suggested that a complete cycle of movement of pollutants into the sampling stations had occurred. Significant biological presences were also detected, as the Ikpoba River water had a standard plate count (SPC) of 130 most probable number (MPN) and a 22 MPN presumptive coliform count (PCC) or 22 MPN. However, Escherichia coli (E. coli) confirmatory tests recorded less than 2 MPN in both seasons. The study has shown that the quality of water in the river may be compromised by effluent discharges from the dumpsite and the carwash channel. Therefore, this situation requires more stringent enforcement of local environmental laws and maintenance of safe distances between domestic and industrial waste sources and domestic or private water wells.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

Nitrogen leaching from Douglas-fir forests after urea fertilization

Leaching of nitrogen (N) after forest fertilization has the potential to pollute ground and surface water. The purpose of this study was to quantify N leaching through the primary rooting zone of N-limited Douglas-fir [Pseudotsuga menziesii (Mirb.) Franco] forests the year after fertilization (224 kg N ha(-1) as urea) and to calculate changes in the N pools of the overstory trees, understory vegetation, and soil. At six sites on production forests in the Hood Canal watershed, Washington, tension lysimeters and estimates of the soil water flux were used to quantify the mobilization and leaching of NO(3)-N, NH(4)-N, and dissolved organic nitrogen below the observed rooting depth. Soil and vegetation samples were collected before fertilization and 1 and 6 mo after fertilization. In the year after fertilization, the total leaching beyond the primary rooting zone in excess of control plots was 4.2 kg N ha(-1) (p = 0.03), which was equal to 2% of the total N applied. The peak NO(3)-N concentration that leached beyond the rooting zone of fertilized plots was 0.2 mg NO(3)-N L(-1). Six months after fertilization, 26% of the applied N was accounted for in the overstory, and 27% was accounted for in the O+A horizon of the soil. The results of this study indicate that forest fertilization can lead to small N leaching fluxes out of the primary rooting zone during the first year after urea application.     

Why telecoupling research needs to account for environmental justice

ABSTRACT

Engaging with normative questions in land system science is a key challenge. This debate paper highlights the potential of incorporating elements of environmental justice scholarship into the evolving telecoupling framework that focuses on distant interactions in land systems. We first expose the reasons why environmental justice matters in understanding telecoupled systems, and the relevant approaches suited to mainstream environmental justice into telecoupled contexts. We then explore which specific elements of environmental justice need to be incorporated into telecoupling research. We focus on 1) the distribution of social-ecological burdens and benefits across distances, 2) power and justice issues in governing distantly tied systems, and 3) recognition issues in information flows, framings and discourses across distances. We conclude our paper highlighting key mechanisms to address injustices in telecoupled land systems.     

Promiscuity: an inbreeding avoidance mechanism in a socially monogamous species?

Summary Paternity likelihood was tested in a population of splendid fairy-wrens Malurus splendens by allozyme electrophoresis. A total of 91 offspring of 24 dams and 37 putative sires were typed at 10 polymorphic loci. All young were compatible with their dams but at least 65% were not fathered by any of the males in their group. A long-term study of this wren population has shown that the males are sedentary, show little evidence of dispersal and help care for the nestlings and fledglings in their group. Had the senior male sired all the offspring in his group, there would have been a high incidence of close inbreeding. The promiscuous mating system demonstrated here would reduce the level of inbreeding in the population but still allow individuals the security of group-living in a stable year-round territory. Offprint requests to: M.G. Brooker     

Maternal serum human chorionic gonadotropin levels in twin pregnancies

Introduction of combined screening with maternal serum alpha-fetoprotein and human chorionic gonadotropin (MShCG) assays for fetal chromosome defects requires establishment of the normal range for twins. This report documents that the normal range for MShCG between 15 and 19 weeks in twin gestations was 1.84–2.41 multiples of the singleton median. Of the 192 twin pregnancies studied, 31.7 and 47.9 per cent had MShCG values ≥2.5 and ≥ 2.0 multiples of the singleton median, respectively.     

Relatedness,recognition errors,and colony fusion in the termite <Emphasis Type="Italic">Nasutitermes corniger</Emphasis>

Loss of aggression between social groups can have far-reaching effects on the structure of societies and populations. We tested whether variation in the genetic structure of colonies of the termite Nasutitermes corniger affects the probability of aggression toward non-nestmates and the ability of unrelated colonies to fuse. We determined the genotypes of workers and soldiers from 120 colonies at seven polymorphic microsatellite loci. Twenty-seven colonies contained offspring of multiple founding queens or kings, yielding an average within-colony relatedness of 0.33. Genotypes in the remaining 93 colonies were consistent with reproduction by a single queen and king or their progeny, with an average within-colony relatedness of 0.51. In standardized assays, the probability of aggression between workers and soldiers from different colonies was an increasing function of within-colony relatedness. The probability of aggression was not affected significantly by the degree of relatedness between colonies, which was near zero in all cases, or by whether the colonies were neighbors. To test whether these assays of aggression predict the potential for colony fusion in the field, we transplanted selected nests to new locations. Workers and soldiers from colonies that were mutually tolerant in laboratory assays joined their nests without fighting, but workers and soldiers that were mutually aggressive in the assays initiated massive battles. These results suggest that the presence of multiple unrelated queens or kings promotes recognition errors, which can lead to the formation of more complex colony structures.     

Factors affecting the concentrations of lead in British wheat and barley grain

The entry of Pb into the food chain is of concern as it can cause chronic health problems. The concentration of Pb was determined in cereal grain samples collected representatively from British Cereal Quality Surveys in 1982 and 1998 (n = 176, 250 and 233 for wheat collected in 1982 and 1998, and barley in 1998, respectively). In addition, paired soil and grain samples were collected from 377 sites harvested across Britain in 1998-2000. Wheat grain Pb ranged from below the analytical detection limit (0.02 mg kg(-1) dry weight, DW) to 1.63 mg kg(-1) DW, and barley grain Pb from <0.02 to 0.48 mg kg(-1) DW. The vast majority of samples (>99% for both wheat and barley, excluding Scottish barley samples collected in 2000) were well below the newly introduced EU limit for the maximum permissible concentration of Pb in cereals (0.2 mg kg(-1) fresh weight, equivalent to 0.235 mg kg(-1) DW). There was a significant reduction in wheat grain Pb in the 1998 survey compared with the 1982 survey. However, 40 barley samples collected from Scotland in 2000 in the paired soil and crop survey showed anomalously high concentrations of Pb, with 10 samples exceeding the EU limit. Washing experiments demonstrated that surface contamination, introduced during grain harvest and/or storage, was the main reason for the high concentrations in these samples. In the paired soil and crop surveys, there were no significant correlations between grain Pb concentrations with total soil Pb and other soil properties, indicating low bioavailability of Pb in the soils and limited uptake and transport of Pb to grain. The Pb in cereal grain is likely to originate mainly from atmospheric deposition and other routes of surface contamination during harvest and storage.