Source identification of particulate matter and associated intake of elements through inhalation in an industrial area of Odisha,India

Particulate matter concentrations were measured in an industrial region in the Ganjam district of Odisha. The average levels of suspended particulate matter (SPM) were measured to be 142 ± 8 and PM₁₀ of particulate matter with a size of less than 10 micrometers (PM₁₀) to be 50 ± 15 μg m^?3. Out of the 14 elements determined, Ca, Na, Mg, Fe, and K contributed more than 95% of the total weight. In enrichment factors, the trace elements, i.e., Zn, Pb, Cd, and Hg were observed to be highly enriched in the SPM and PM₁₀. Factor analysis indicates that more than 75% of the variance was due to five component factors, which have eigenvalues greater than 1. Intake of elements through inhalation route to adults has been estimated.     

Tracking land cover change along the western edge of the U.S. Corn Belt from 1984 through 2016 using satellite sensor data: observed trends and contributing factors

The Cropland Data Layers (CDL) are high-resolution geo-referenced data products made available by the U.S. Department of Agriculture. However, the CDL lacks in its ability to be employed as a tool to identify the impact of the gradually evolving drivers of land use change, e.g., climate change, due to its limited historical depth. We implement a robust, phenology-based satellite image classification algorithm to identify historical cropland allocation in eastern South Dakota and North Dakota predating the initial CDL by 13 and 22 years, respectively. Five major land covers, i.e., corn, soybeans, wheat, alfalfa and grass (including native grass, hay and pasture) are identified using archived Landsat-5 surface reflectance data, while achieving CDL-like accuracy. The long-term rate of grassland loss during 1985–2011 is found to be significantly lower (26,781 hectares or 1.5% annually) relative to the near-term rate of grassland loss during 2006-’11 (84,545 hectares or 5.2% annually). We find similar discrepancy in regional corn expansion rates. Our value-added raster data provide opportunities for improved identification of land use drivers, whereas relying solely on the CDL’s restricted historical extent may lead to biased land use change estimates and misguide policy.     

Land treatment: A viable and successful method of treating petroleum industry wastes

Land treatment is an environmentally attractive alternative for the disposal of petroleum refinery wastes. Diverse populations of soil microorganisms degrade waste oil and other organic compounds through a series of complex reactions to yield carbon dioxide, water, and innocuous byproducts. Approximately one-half of the disposable volume of oily sludges are currently land treated at more than 100 sites across the United States under a variety of soil and climatic conditions. Maximization of biodegration rates requires an optimization of management practices which stimulate aerobic microbial populations in the soil. These management practices include addition of fertilizer, judicious waste application, and frequent cultivation. Off-site migration of oily waste constituents that would endanger groundwater quality has not been observed in several field and laboratory studies. The leached residuals are apparently adsorbed, assimilated, or inactivated in the upper soil horizons. A prudent management system, however, requires an individually tailored monitoring system with dual objectives for an early detection of off-site waste constituent transport and for evaluating the performance of waste biodegradation processes. A cost comparison for the disposal of oily wastes by currently available technologies indicates that land treatment is the most economical option.     

Effect of hypoxia on the circulating levels of essential mineral elements in rats

Changes occurring in concentrations of certain trace metals and electrolytes viz. chromium, copper, zinc, sodium, potassium, calcium, magenesium and chloride in plasma of rats exposed to intermittent hypobaric hypoxia were evaluated. Batches of Sprague-Dowley rats (12 in each group) were exposed for 1, 7,14 and 21 days to a simulated altitude 7,620 m for 6 h per day and one group of unexposed animals was kept as control. There was a significant rise of 153% in plasma chromium levels of 1 day exposed group in comparison to the unexposed group which tends to normalise on subsequent exposure. There was a gradual increase in plasma copper levels of 9.0, 28.2, 62.6 and 65.6% respectively in 1,7,14 and 21 days exposed rats in comparison to unexposed rats. On the other hand plasma zinc levels were seen to be decreasing during entire exposure. Plasma sodium levels decreased initially in 1 and 7 day exposed rats and increased in later groups whereas plasma potassium levels of exposed groups remained low in comparison to unexposed group. Chloride levels were found to be elevated in 14 and 21 day exposed groups. The plasma calcium and magnesium levels were higher in all exposed groups over unexposed groups. Changes in chromium, copper and zinc observed in the present study during exposure to hypoxic stress may be responsible for the hyperglycemia and anorexia encountered during intial phase of high altitude acclimatisation.     

Upgrading of distillery effluent by Nitrosococcus oceanus for its use as a low-cost fertilizer

Distillery effluent can be converted into biogas and the residue can be utilized as a fertilizer if it is detoxified. Several nitrifying bacteria were screened for detoxification of distillery effluent rich in chloride, nitrogen compounds, free ammonia and monovalent cations. Nitrosococcus oceanus collected from a brackish water lake (Chilka, Orrisa) was noticed to be a potential candidate for detoxification of distillery effluent. The detoxified distillery effluent was used in rice plant culture. The growth and development of rice plants was examined in terms of DCPIP—Hill activity, total carbohydrate, total protein and biomass of rice plants. The detoxified effluent-treated rice plants showed better growth and development as compared with control plant grown in full nutrient solution (Hoagland solution).     

An investigation of the relationship between raw coal characteristics and effluent quality of Kedla and Rajrappa Washeries, Jharkhand, India

An attempt was made to investigate the relationship between raw coal characteristics and effluent quality in two coking coal washeries of Central Coalfields Limited, Kedla and Rajrappa in Jharkhand State, India. Coal samples-raw coal feed, washed fine clean coal, washed coarse clean coal, middlings and rejects were collected. Similarly, raw water (intake to washery) and effluent samples generated in the washeries, namely, fine coal jig under water, coarse coal jig under water and slurry pond water were also collected over a period of 6 months. Parameters outlined in Ministry of Environment and Forest (MoEF) Schedule VI Indian standards were determined, both in coal samples and water/washery effluent samples. Apart from the parameters listed in the standard, sodium, potassium, calcium, magnesium, sulphate and chloride found to be present in coal were also determined in coal and water samples. The processing results essentially in production of huge quantities of suspended material, which is beyond the stipulated limit of 100mg/l as specified in the Standard. Lowering of pH was observed in both the washeries. The trace/heavy elements were found to be concentrated in the heavier fractions in rejects produced from the washery. The concentrations of major elements in coal-Na, K, Ca, Mg, and minor elements in coal-Mn; F, SO4 and Cl were found to be higher in process water than in raw water indicating that these elements are transferred from coal to the water in washeries. However, only in the case of Mn, the stipulated limit of the effluent standard was exceeded. Trace elements like As, Se, Hg, Cd, though found to be present in coal, were absent in the process water indicating that these elements are not released by coal during washing.     

Distribution of improved cook stoves: analysis of field experiments using strategic niche management theory

Close to three billion people globally and over 800 million in India are dependent on direct combustion of unprocessed solid biomass fuels in inefficient traditional mud stoves. Current cooking practices, besides causing serious health problems, are also being linked to emissions of climate change and pollution agents such as black carbon and ozone precursors. In India several initiatives have been taken up to tackle the problem but the present trajectory of limited technical and social change in cooking energy use is nonetheless persistent in rural areas. In order to develop and scale up alternative cooking technology options, we have analyzed, using the principles of strategic niche management, two projects implemented by The Energy and Resources Institute (TERI) in nine villages in India. The assessment, while highlighting reasons for stability of the current cooking regime, also points to triggers that can destabilize the regime. The focus is also on assessing the influence of protection in the form of subsidies on the process of transition. User preferences relating to social and technical aspects have been analyzed, pointing to forced draft cookstoves as the preferred option notwithstanding cost reductions to address affordability concerns. The assessment indicates that while it is critically important to understand and address the preferences of users and to improve the technology, scaling up will depend on stove cost reduction through further research. Creativity in effective financing schemes and support structures put in place by fostering public–private partnerships are also needed.     

Sub-chronic oral toxicity of acetamiprid in Wistar rats

Acetamiprid is a neoncotinoid insecticide that acts as an agonist to the nicotinic acetylcholine receptor used as insecticide in crops and to control fleas on dogs and cats. The objectives of this study are (1) to evaluate the sub-chronic toxicity of orally administered acetamiprid, (2) to estimate the tissue residue levels and (3) to assess the reactive oxygen species induction in Wistar rats. Clinical signs of toxicity and changes in the haematological parameters were not observed in the acetamiprid-treated groups. Biochemically, increases in the levels of alanine aminotransferase, aspartate aminotransferase, cholesterol and decreases in body weight, feed consumption, reduced glutathione, catalase, superoxide dismutase, glutathione peroxidase, and AchE were observed. Lipid peroxidation was increased in liver and kidney. Acetamiprid residues persisted in liver, kidney, spleen, muscles, brain, fat and histopathology revealed lesions in the liver. The no observable adverse effect level of acetamiprid was found to be ≤55 mg/kg body weight.     

Towards the Prediction of Heat and Mass Transfer in an Air-Conditioned Environment for a Life Support System in Space

Long-term flights or the establishment of permanent bases in space provide serious challenges for life support systems. Plants are essential companion life forms for such space missions, where human habitats must mimic the cycles of life on earth to generate and recycle food, oxygen and water. Nowadays, the chemical–mechanical recycling systems used in the international space station are much more compact, less labour intensive and more reliable than plant-based systems, but these systems would be too expensive for the long-term human exploration. In order to improve living conditions for humans and plants, we need an accurate characterisation of the mass transfer phenomena related to condensation of humid air. We are interested in developing an experimental protocol, which would help us to establish a theoretical model describing the heterogeneous transfers along a wall or a plant in an air-conditioned environment. Initially, we started in dry conditions by measuring the velocity profiles within the boundary layer that develop on a horizontal or a vertical flat plate in a wind tunnel. The velocity ranged from 0.5 to 2.5 m s^?1. Existing coupled heat and mass transfer measurement results relevant to our applications are discussed.