Regulating non-precious transition metal nitrides bifunctional electrocatalysts through surface/interface nanoengineering for air-cathodes of Zn-air batteries

Zn-air batteries (ZABs), especially the secondary batteries, have engrossed a great interest because of its high specific energy, economical and high safety. However, due to the insufficient activity and stability of bifunctional electrocatalysts for air-cathode oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) processes, the practical application of rechargeable ZABs is seriously hindered. In the effort of developing high active, stable and cost-effective electrocatalysts, transition metal nitrides (TMNs) have been regarded as the candidates due to their high conductivity, strong corrosion-resistance, and bifunctional catalytic performance. In this paper, the research progress in TMNs-based material as ORR and OER electrocatalysts for ZABs is discussed with respect to their synthesis, chemical/physical characterization, and performance validation/optimization. The surface/interface nanoengineering strategies such as defect engineering, support binding, heteroatom introduction, crystal plane orientation, interface construction and small size effect, the physical and chemical properties of TMNs-based electrocatalysts are emphasized with respect to their structures/morphologies, composition, electrical conductivity, specific surface area, chemical stability and corrosion resistance. The challenges of TMNs-based materials as bifunctional air-cathode electrocatalysts in practical application are evaluated, and numerous research guidelines to solve these problems are put forward for facilitating further research and development.     

Roadmap for carbon neutrality: the mediating role of clean energy development-related investments

Environmental Science and Pollution Research - Recently, the Japanese government has announced the national objective of turning the economy of Japan carbon–neutral by 2050. This...     

Adsorptive removal of direct dyes by PEI-treated peanut husk biomass: Box–Behnken experimental design

This paper reports the application of Box-Behnken experimental design to illustrate the adsorption of direct dyes (Indosol Black NF and Indosol Orange RSN) using polyethyleneimine (PEI)-treated peanut husk biomass. The effect of three independent variables (initial dyes concentration, biosorbent dose and pH) was investigated during the study. Maximum biosorption capacity (141 and 98.2 mg/g) of PEI-pretreated biomass was achieved with 200 mg/L initial dye concentration and 0.05 g/50 mL biomass dose for Indosol Black NF and Indosol Orange RSN, respectively. Acidic pH was found to be favourable for maximum dyes removal. Characterisation of biosorbent was carried out through Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy, thermogravimetric analysis (TGA) and point of zero charge determination. FT-IR analyses confirmed the involvement of carboxylic and carbonyl groups. The desorption study was also conducted to check out the possibility of regeneration of dyes and adsorbent and it was found that 51.58 and 76.6% of Indosol Black NF and Indosol Orange RSN, respectively, can be desorbed from the loaded biosorbent by using 1 M NaOH solution. The results indicated that PEI-treated peanut husk biomass can be used as an efficient biosorbent for the removal of Indosol Black NF and Indosol Orange RSN dyes from aqueous solutions.     

Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

A comparison of concentrations of polycyclic aromatic compounds detected in dust samples from various regions of the world

Settled house dust can be a source of human exposure to toxic polycyclic aromatic hydrocarbons (PAHs) through non-dietary ingestion and dermal contact. Information regarding the concentrations of various contaminants in house dust would be useful in estimating the risk associated with exposure to these compounds. This study reports on the surface loading, variability and distribution of PAHs in settled house dust collected from homes in three locations: Sumgayit, Azerbaijan; Shanxi Province, China; and southern Texas, United States. The highest PAH floor surface loadings were observed in China, followed by Azerbaijan and Texas. Median concentrations of high molecular weight (four ring and larger) PAHs ranged from a low of 0.11 microg/m(2) in Texas, to 2.9 microg/m(2) in Azerbaijan and 162 microg/m(2) in China. These trends in total surface loading and relative carcinogenicity indicate that the risk of health effects from exposure to PAHs in house dust is highest in the Chinese population and lowest in the Texas population. As anticipated, variability among dust samples from different houses within the same region was high, with coefficients of variation greater than 100%. Alkylated PAHs comprised 30-50% of the total mass of PAHs. Based on a comparison of the composition of specific components, PAHs in China and Azerbaijan were determined to be derived mainly from combustion sources rather than from unburned fossil fuels such as petroleum. These results, coupled with ongoing investigation of appropriate PAH exposure biomarkers in humans, will guide future efforts to identify ways to reduce exposures in the study areas.     

Impact of storm water on groundwater quality below retention/detention basins

Groundwater from 33 monitoring of peripheral wells of Karachi, Pakistan were evaluated in terms of pre- and post-monsoon seasons to find out the impact of storm water infiltration, as storm water infiltration by retention basin receives urban runoff water from the nearby areas. This may increase the risk of groundwater contamination for heavy metals, where the soil is sandy and water table is shallow. Concentration of dissolved oxygen is significantly low in groundwater beneath detention basin during pre-monsoon season, which effected the concentration of zinc and iron. The models of trace metals shown in basin groundwater reflect the land use served by the basins, while it differed from background concentration as storm water releases high concentration of certain trace metals such as copper and cadmium. Recharge by storm water infiltration decreases the concentration and detection frequency of iron, lead, and zinc in background groundwater; however, the study does not point a considerable risk for groundwater contamination due to storm water infiltration.     

Toxic responses in primary rat hepatocytes exposed with occupational dust collected from work environment of bone-based industrial unit

In this in vitro study we investigated the toxic responses in hepatocytes treated with occupational dust to which workers are exposed in bone-based industrial units. The present study investigated the toxicity mechanism of bone-based occupational dust, from a particular industrial unit, on isolated rat hepatocytes. The hepatocytes were isolated by collagenase perfusion method and cell viability was determined by trypan blue exclusion and MTT [3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay treated with occupational dust at 0.1-1.0 mgmL(-1), for 120 min. The cell viability decreased significantly in a concentration-dependent manner. Dust induced significant membrane damage measured by lactate dehydrogenase (LDH) and glutathione (GSH) release in culture media for 30-, 60- and 120 min treatment duration. The toxicity was found to be correlated with the induction of lipid peroxidation (LPO). In addition, nitric oxide (NO), and hydrogen peroxide (H(2)O(2)) generation by occupational dusts were also found to be time- and concentration-dependent. Over all the present study provides initial evidences for the toxic potential of occupational dust generated in bone-based industries and, therefore, the dust exposure to workers in unorganized industrial units should be controlled.     

Fluoride contamination in drinking water in rural habitations of Central Rajasthan, India

Fluoride concentration in groundwater sources used as major drinking water source in rural area of block Nawa (Nagaur District), Rajasthan was examined and the toxic effects by intake of excess fluoride on rural habitants were studied. In block 13, habitations (30%) were found to have fluoride concentration more than 1.5 mg/l (viz. maximum desirable limit of Indian drinking water standards IS 10500, 1999). In five habitations (11%), fluoride concentration in groundwater is at toxic level (viz. above 3.0 mg/l). The maximum fluoride concentration in the block is 5.91 mg/l from Sirsi village. As per the desirable and maximum permissible limit for fluoride in drinking water, determined by World Health Organization or by Bureau of Indian Standards, the groundwater of about 13 habitations of the studied sites is unfit for drinking purposes. Due to the higher fluoride level in drinking water, several cases of dental and skeletal fluorosis have appeared at alarming rate in this region. There is an instant need to take ameliorative steps in this region to prevent the population from fluorosis. Groundwater sources of block Nawa can be used for drinking after an effective treatment in absence of other safe source. The evaluation of various defluoridation methods on the basis of social and economical structure of India reveals that the clay pot chip, activated alumina adsorption, and Nalgonda techniques are the most promising.     

Elemental contamination in urban parks of Rawalpindi/Islamabad—a source identification and pollution level assessment study

The soil quality of urban parks is of vital importance as the children playing in the parks get themselves easily contaminated. A study was conducted to assess the level of elemental pollution caused by constant urbanization and industrialization, in various parks of Islamabad and Rawalpindi. The soil samples, collected from 14 urban parks of Islamabad and Rawalpindi areas, were analysed for their elemental concentrations. In each sample, 32 elements were quantified using semi-absolute k (0)-instrumental neutron activation analysis and flame atomic absorption spectrophotometry. The quality of analysis was assured by analysing the International Atomic Energy Agency (IAEA) reference material IAEA-S7 (soil). The pollution level was assessed by enrichment factor, pollution load index and our suggested indicator called "average toxic element concentration". The elemental concentrations measured in the parks of two cities were compared by t test. Four sources of different elements in the soils were identified by employing principal component analysis and cluster analysis. The results of multivariate techniques grouped all parks into four classes. The use of enrichment factor indicated the presence of Ni at slightly higher level in all parks while the pollution load index revealed that the parks of Rawalpindi were relatively more polluted as compared to that of Islamabad. The hot spot areas of elemental concentration were closely related to high traffic conditions.     

Assessing the genotoxic potentials of arsenic in tilapia (Oreochromis mossambicus) using alkaline comet assay and micronucleus test

This experiment was conducted to study the genotoxic potentials of sodium arsenite (NaAsO₂) in freshwater fish Oreochromis mossambicus by using alkaline comet assay and micronucleus (MN) test. Fish were exposed to three different concentrations (3 ppm, 28 ppm and 56 ppm) of arsenic and gill, liver and blood tissue samples were collected after 48 h, 96 h and 192 h of exposure. Arsenic exposure induced DNA damage in all tissues examined in a concentration dependent manner. A significant (p < 0.05) increase in the comet tail DNA (%) of the exposed fish liver, gill, and blood was observed after 48 h and 96 h of exposure, but a decline in DNA damage was recorded in all the tissues at all the three concentrations studied after 192 h of exposure. Liver tissue exhibited significantly (p < 0.05) higher DNA damage at all the concentrations examined, followed by gill and blood. Higher liver tail DNA (51.38 ± 0.21%) refers that it is more prone to injury to arsenic toxicity than the gill and blood. In blood samples arsenic induced micronucleus formation in a concentration dependent manner and highest (5.8 ± 0.46%) value was recorded in 56 ppm after 96 h of exposure, whereas, it was decreased after 192 h of exposure at all the three concentrations of NaAsO₂ examined which refers to the DNA repairing ability of fish to arsenic toxicity. The results of this study depict the genotoxic potentials of arsenic to fish which in turns provide insight on advanced study in aquatic toxicology.