Chromium toxicity in plants

Due to its wide industrial use, chromium is considered a serious environmental pollutant. Contamination of soil and water by chromium (Cr) is of recent concern. Toxicity of Cr to plants depends on its valence state: Cr(VI) is highly toxic and mobile whereas Cr(III) is less toxic. Since plants lack a specific transport system for Cr, it is taken up by carriers of essential ions such as sulfate or iron. Toxic effects of Cr on plant growth and development include alterations in the germination process as well as in the growth of roots, stems and leaves, which may affect total dry matter production and yield. Cr also causes deleterious effects on plant physiological processes such as photosynthesis, water relations and mineral nutrition. Metabolic alterations by Cr exposure have also been described in plants either by a direct effect on enzymes or other metabolites or by its ability to generate reactive oxygen species which may cause oxidative stress. The potential of plants with the capacity to accumulate or to stabilize Cr compounds for bioremediation of Cr contamination has gained interest in recent years.     

A multivariate statistical approach for the evaluation of spatial and temporal dynamics of surface water quality from the small reservoir located in the drought-prone area of South-West India: a case study of Tiru reservoir (India)

Environmental Science and Pollution Research - With the use of different multivariate statistical analysis methods, spatio-temporal fluctuations in the water parameters of Tiru reservoir located at...     

Closing the phosphorus loop in England: The spatio-temporal balance of phosphorus capture from manure versus crop demand for fertiliser

Every year 90 million tonnes of housed livestock manures are produced in the UK. This is a valuable reservoir of global phosphorus (P) and a point in the cycle where it is vulnerable to being lost from the terrestrial system. Improved manure management for the effective reuse of phosphorus is vital to simultaneously tackle a major source of water pollution and reduce our dependence on imported fertilisers. This paper quantifies, for the first time, the spatial and temporal challenges of recycling the required amount of manure P from areas of livestock production to areas of crop production in eight regions of England. The analysis shows that England has a P deficit and therefore the capacity to fully utilise the manure P on arable land, but that uneven spatial distribution of livestock poses a significant challenge to closing the P loop in agriculture. Two of the eight regions were shown to have surplus manure P, with the remaining six regions having P deficits, indicating that an annual export of 4.7 thousand tonnes P (2.8 million tonnes manure) must take place from the west to the east of the country each year to balance P supply and demand. Moreover, housed manure production peaks between October and February, requiring an excess of 23.0 thousand tonnes P (15 million tonnes manure) to be stored until it can be used for crop fertilisation from March onwards. The results demonstrate the scale of the challenge in managing manure P in an agricultural system that has separated livestock production from crop production, a pattern that is echoed throughout the developed world. To overcome the spatial and temporal challenges, a logistical system is recommended that will balance the nutrient potential (nitrogen and P content and availability) and pollution potential (eutrophication, greenhouse gas emissions, particulates and nitrous oxide from transport) for cost-effective and environmentally compatible redistribution of manure P from areas of surplus to areas of deficit, when required.     

Recent advances in nanomaterial developments for efficient removal of Hg(II) from water

Environmental Science and Pollution Research - “Water” contamination by mercury Hg(II) has become the biggest concern due to its severe toxicities on public health. There are different...     

Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.

     

Heavy metal accumulation in certain marine animals along the East Coast of Chennai, Tamil Nadu, India

Heavy metals disposed through anthropogenic activities find their way into the oceans and seas through the rivers or through direct fall out from factory effluents. These heavy metals resuspend back into the water column along with the sediments and are known to affect the marine animals. Marine animals like fish, prawn, crab and mussel were collected along the East Coast (off Pulicat lake to Chennai Harbour) to evaluate trace metal concentrations in various tissues. The above specimens accumulated heavy metals such as Zn, Pb, Cu, Co, Cr, Ni and Cd. Fish, prawn, crab and mussel revealed higher concentration of heavy metals such as Zn, Pb, Cr Co, Cu and Ni and Cd in low levels. The results revealed that the heavy metal concentrations in the marine animals are below the threshold levels associated with the toxicological effects and the regulatory limits. The bioconcentration factors revealed that the animals have accumulated heavy metals along the food chain rather than from the water column and sediment.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

Treatment of sugar industry wastewater using a combination of thermal and electrocoagulation processes

Sugar industries require a large amount of water for processing, and also generate large amounts of high-degree polluted wastewater. To maintain the water balance in the industry, it is imperative that effective treatment methods need to be devised to treat the wastewaters. The main aim of the present work is to treat the sugar industry wastewater by combined thermal and electro-oxidation methods with a metal and a catalyst based on ferrous material. Results showed a reduction of 75.6% of COD and 79.2% of colour content with thermal treatment, and 97.8% of COD and 99.7% of colour with combined thermal and electrocoagulation treatments under optimum conditions. These reduction levels are adequate for recycling limits.     

Self-Reporting and the Design of Policies for Regulating Stochastic Pollution

Existing environmental regulations frequently require firms to self-report their compliance status to regulatory agencies. Using a principal-agent framework, I derive and compare incentive-compatible regulatory policies with and without self-reporting. I find the firm needs to be audited less often when self-reporting is required, but punished more often. The sign and magnitude of the gains from self-reporting depend on the relative size of audit and sanction costs, the accuracy of the regulator′s monitoring technology, and the desired level of abatement effort.