Arsenic speciation in marine fish and shellfish from American Samoa

We speciated arsenic compounds in marine fish and shellfish from two islands of the United States Territory of American Samoa in the South Pacific, and found that inorganic arsenic occurred as a minor fraction. The proportion of inorganic arsenic was generally far below the levels of prevailing assumptions typically used in human health risk assessments when only total arsenic is analysed. Fish and shellfish were collected from Tutuila and Ofu between May 2001 and March 2002 (n=383 individual specimens, with 117 composites); sites were selected based on habitat type and were representative of those frequented by local fishers. These islands have moderately developed reef fish fisheries among artisanal fishers, are far removed from any industrial or mining sources of arsenic, and presented an opportunity to study arsenic variations in marine biota from un-impacted environments. Target species were from various trophic levels and are among those frequently harvested for human consumption. We found evidence that arsenic concentrated in some marine species, but did not tend to follow classic trophic patterns for biomagnification or bioaccumulation. For the majority of samples, inorganic arsenic was less than 0.5% of total arsenic, with only a few samples in the range of 1-5%, the latter being mollusks which are recognized to have unusually high arsenic levels in general. This work supports the importance of speciation analysis for arsenic, because of the ubiquitous occurrence of arsenic in the environment, and its variable toxicity depending on chemical form.     

Bacterial cell monitoring in wastewater treatment plants by flow cytometry.

The activated sludge process is performed by a variable and mixed community of microorganisms in an aerobic aquatic environment, in which bacteria constitute the majority and represent the main microorganisms responsible for the degradation process in a plant. In this work, we monitored bacterial charge in different wastewater treatment plants by flow cytometry, also evaluating chlorination effects on bacterial viability, both by flow cytometry and traditional plate counts. Maximum values of bacterial charge were registered in the aeration tank of all plants monitored. Cell viability did not show significant differences (p > 0.05) in samples collected in "before chlorination" and "wastewater effluent" treatment steps; this suggests that the chlorination was not able to decrease total viable bacterial charge. In this work, we discuss the need to improve microbiological analyses, both in terms of measuring other potential pathogens and of using new methodological approaches in the traditional evaluation of the microbiological quality of effluents.     

Variation in sensitivity to cadmium among genetically characterized laboratory strains of the midge Chironomus riparius

Estimating the extent of intraspecific variation in sensitivity to contaminant exposure is important in order to explain variation in the outcome of toxicity tests and to predict the effects of chemical stress on natural populations of plants and animals. However, only few studies provide evident data concerning intraspecific variation in life-history traits caused by a differential response to chemical stress. In this study, we compared the life-history response of six laboratory strains of the midge Chironomus riparius to cadmium exposure in a full life-cycle assay. In addition, the level of genetic variation in all strains was measured at five variable microsatellite loci. Several significant differences in life-history traits among the strains were observed in controls and cadmium treatments. The extent of variation among strains was largest at moderate cadmium concentration (0.42 mg Cd/kg dw). At increased Cd concentrations all strains showed similar levels of high mortality and reduced reproductive success. All strains exhibited considerable levels of genetic impoverishment compared to field populations. Strains with low genetic variation showed reduced fitness in the controls and were more susceptible to Cd exposure. For instance, no reproductive success in the lowest Cd treatment was observed for the strain with the lowest level of genetic diversity. In contrast, this Cd concentration had no negative effects on life-history traits of more variable strains. These results confirm recent findings, that inbreeding and reduced genetic variation influence the reaction of populations towards environmental stress. In addition, we show that the level of genetic variation and inbreeding directly influences the outcome of toxicity tests and contributes to the lack of reproducibility of test results among laboratories.     

Dioxins, PCBs, metals, metalloids, pesticides and antimicrobial residues in wild and farmed Australian southern bluefin tuna (Thunnus maccoyii)

Data concerning the concentration of dioxins (PCDD/PCDFs), polychlorinated biphenyls (PCBs), metals, metalloids, pesticides and antimicrobials residues are reported for the edible portion of Australian wild and farmed southern bluefin tuna (Thunnus maccoyii). In 2004 wild caught (n=5) and farmed (n=26) southern bluefin tuna (SBT) were collected. The mean concentration of total mercury on a fresh weight (fw) basis was 0.34 mg/kg in wild SBT and 0.31 mg/kg in farmed SBT. Concentrations of dioxins (PCDD/PCDFs) and polychlorinated biphenyls (PCBs) found in wild SBT were extremely low. The mean concentration (fw) of the sum of PCDD/PCDFs and the dioxin-like PCBs was 0.27 pg TEQ/g in wild SBT and 0.61 pg TEQ/g in farmed SBT. Mean PCB total concentration (fw basis) was 0.47 ng/g in wild SBT and 6.60 ng/g in farmed SBT. No detectable residues of any pesticide or antimicrobial compounds were found. All residues detected were within regulatory limits set by the Japanese Competent Authority, the Ministry of Health, Labour and Welfare (MHLW) and the Australian Competent Authority, Food Standards Australia New Zealand (FSANZ). The need for harmonisation of international product integrity procedures for bluefin tunas in international trade is highlighted.     

Dilution-based emissions sampling from stationary sources: Part 1--Compact sampler methodology and performance

This paper presents the design and performance of a compact dilution sampler (CDS) for characterizing fine particle emissions from stationary sources. The sampler is described, along with the methodology adopted for its use. Dilution sampling has a number of advantages, including source emissions that are measured under conditions simulating stack gas entry and mixing in the ambient atmosphere. This is particularly important for characterizing the semivolatile species in effluents as a part of particulate emissions. The CDS characteristics and performance are given, along with sampling methodology. The CDS was compared with a reference dilution sampler. The results indicate that the two designs are comparable for tests on gas-fired units and a diesel electrical generator. The performance data indicate that lower detection limits can be achieved relative to current regulatory methods for particulate emissions. Test data for the fine particulate matter (PM2.5) emissions are provided for comparison with U.S. Environment Protection Agency (EPA) Conditional Test Method 040 for filterable particulate matter (FPM) and the EPA Method 202 for condensable particulate matter. This comparison showed important differences between methods, depending on whether a comparison is done between in situ FPM determinations or the sum of such values with condensable PM from liquid filled impingers chilled in an ice bath. These differences are interpretable in the light of semivolatile material present in the stack effluent and, in some cases, differences in detection and quantification limits. Determination of emissions from combustors using liquid fuels can be readily achieved using 1-hr sampling with the CDS. Emissions from gasfired combustors are very low, requiring careful attention to sample volumes. Sampling volumes corresponding with 6-hr operation were used for the combined mass and broad chemical speciation. Particular attention to dilution sampler operation with clean dilution air also is essential for gas-fired sources.     

Evaluation of Bulk Deposition in Protected Woodland Area in Western Poland

Research on precipitation carried out systematically at the University station at Jeziory in the Wielkopolski National Park (western Poland) allowed the determination of pollutants deposited with precipitation in this forest ecosystem. During 13 years of study, the pH of precipitation was found to persist at a low level (4.33 on average), which resulted a substantial deposition of H⁺. Values of acidifying and basic ions deposited in this area were determined and compared with the respective figures obtained at selected EMEP stations studying background pollution, the means for Poland, and areas subjected to considerable human impact. The use of the critical load function made it possible to establish that the S and N deposition for 2002–2005 were below its line.     

Quantifying MTBE biodegradation in the Vandenberg Air Force Base ethanol release study using stable carbon isotopes

Compound-specific isotope analysis (CSIA) was used to assess biodegradation of MTBE and TBA during an ethanol release study at Vandenberg Air Force Base. Two continuous side-by-side field releases were conducted within a preexisting MTBE plume to form two lanes. The first involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene ("No ethanol lane"), while the other involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene and ethanol ("With ethanol lane"). The delta(13)C of MTBE for all wells in the "No ethanol lane" remained constant during the experiment with a mean value of -31.3 +/- 0.5 per thousand (n=40), suggesting the absence of any substantial MTBE biodegradation in this lane. In contrast, substantial enrichment in (13)C of MTBE by 40.6 per thousand, was measured in the "With ethanol lane", consistent with the effects of biodegradation. A substantial amount of TBA (up to 1200 microg/L) was produced by the biodegradation of MTBE in the "With ethanol lane". The mean value of delta(13)C for TBA in groundwater samples in the "With ethanol lane" was -26.0 +/- 1.0 per thousand (n=32). Uniform delta(13)C TBA values through space and time in this lane suggest that substantial anaerobic biodegradation of TBA did not occur during the experiment. Using the reported range in isotopic enrichment factors for MTBE of -9.2 per thousand to -15.6 per thousand, and values of delta(13)C of MTBE in groundwater samples, MTBE first-order biodegradation rates in the "With ethanol lane" were 12.0 to 20.3 year(-1) (n=18). The isotope-derived rate constants are in good agreement with the previously published rate constant of 16.8 year(-1) calculated using contaminant mass-discharge for the "With ethanol lane".     

Evaluating landfill disposal of chromated copper arsenate (CCA) treated wood and potential effects on groundwater: evidence from Florida

Chromated copper arsenate (CCA) treated wood has been used for more than 50 years. Recent attention has been focused on appropriate disposal of CCA-treated wood when its service life ends. Groups in the US and Europe concerned with the possibility of arsenic migration to groundwater from disposed CCA-treated wood have proposed that consumers be required to dispose of the wood as a hazardous waste, in the most protective of landfills. We examined available data for evidence of arsenic migration from unlined construction and demolition (C&D) debris landfills in Florida, where CCA-treated wood is disposed. Florida was chosen because soil, groundwater, landfill design, weather, and levels of CCA-treated wood use make the state a uniquely sensitive indicator for observing arsenic migration from CCA-treated wood disposal sites, should it occur. We developed and quality-checked a CCA-treated wood disposal model to estimate the amount of wood and associated arsenic disposed. By 2000, an estimated 13 million kg of arsenic in CCA-treated wood was disposed in Florida; however, groundwater monitoring data do not indicate that arsenic is migrating from unlined C&D landfills. Our results provide evidence that highly stringent regulation of CCA-treated wood disposal, such as treatment as a hazardous waste, is unnecessary.     

Evaluations of the chemical mass balance method for determining contributions of gasoline and diesel exhaust to ambient carbonaceous aerosols

The US. Department of Energy Gasoline/Diesel PM Split Study was conducted to assess the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the relative contributions of emissions from gasoline (or spark ignition [SI]) and diesel (or compression ignition [CI]) engines to ambient concentrations of fine particulate matter (PM2.5) in California's South Coast Air Basin (SOCAB). In this study, several groups worked cooperatively on source and ambient sample collection and quality assurance aspects of the study but worked independently to perform chemical analysis and source apportionment. Ambient sampling included daily 24-hr PM2.5 samples at two air quality-monitoring stations, several regional urban locations, and along freeway routes and surface streets with varying proportions of automobile and truck traffic. Diesel exhaust was the dominant source of total carbon (TC) and elemental carbon (EC) at the Azusa and downtown Los Angeles, CA, monitoring sites, but samples from the central part of the air basin showed nearly equal apportionments of CI and SI. CI apportionments to TC were mainly dependent on EC, which was sensitive to the analytical method used. Weekday contributions of CI exhaust were higher for Interagency Monitoring of Protected Visual Environments (IMPROVE; 41+/-3.7%) than Speciation Trends Network (32+/-2.4%). EC had little effect on SI apportionment. SI apportionments were most sensitive to higher molecular weight polycyclic aromatic hydrocarbons (indeno[123-cd]pyrene, benzo(ghi)perylene, and coronene) and several steranes and hopanes, which were associated mainly with high emitters. Apportionments were also sensitive to choice of source profiles. CI contributions varied from 30% to 60% of TC when using individual source profiles rather than the composites used in the final apportionments. The apportionment of SI vehicles varied from 1% to 12% of TC depending on the specific profile that was used. Up to 70% of organic carbon (OC) in the ambient samples collected at the two fixed monitoring sites could not be apportioned to directly emitted PM emissions.