The Market for Waste Vitrification Technology

Waste vitrification technology has largely been developed by the United States Department of Energy (DOE). Numerous vendors offer vitrification units, and a number of commercial and large pilot applications have been made. Nevertheless, the industry is still in its infancy and does not dominate any waste treatment niche. DOE funding of vitrification technology development is nearing an end, and DOE waste treatment is being privatized, with private bidders selecting the technologies and offering to treat wastes for a per-unit fee. Thus, the DOE market is shifting from a cost-plus, largely R&D environment to a fixed-fee environment in which vendors and waste treatment contractors must accept technological risks. Significant quantities of DOE waste are still uncommitted, but the number of vendors is larger than the market can possibly sustain. Domestic private sector opportunities are limited and vendors are looking to foreign markets with less mature treatment capacity and growing demand.     

Performance study on portable water filters

This study explored the effectiveness of five portable water filters for improving certain physical, chemical and biological parameters related to drinking water quality. The parameters investigated included: turbidity, total suspended solids, true and apparent colour, conductivity, pH, alkalinity, hardness, and heterotrophic plate count. In general, ceramic medium water filters improved water quality the greatest and with the incorporation of activated carbon a further reduction in colour and dissolved solids was possible.     

煤矸石制砖企业职业安全健康风险与控制现状调查研究

调查与分析煤矸石制砖企业职业安全与健康风险与控制现状,为预防与控制职业安全健康风险提供依据。采用填表、现场监测与核查等方法,对13家煤矸石制砖企业的基本情况、危险和有害因素、防护措施等情况进行了调查、分析与评价。工作场所可能存在坍塌、机械伤害、挤压伤害、烧伤/灼烫、触电/电击、车辆伤害/撞击、中毒和窒息和砸伤、粉尘、噪声、高温和有害气体、不良工效学因素等危险、有害因素。防护罩、活动栏杆、地沟盖板、人行过梯、高压保护和隔离栏杆、通风除尘设施、喷淋设施、窑口引风机、烟尘脱硫除尘系统等为该类企业配置的主要防护设施;防尘口罩、防护手套和劳动护肤品为该类企业使用的个体防护装备,所有企业均未为噪声接触人员提供护听器。煤矸石制砖企业存在多种危险、有害因素,企业配有相应防护设施,但其效果欠佳,企业应加强对工作场所噪声危害的预防与控制。     

Bedding and seasonal effects on chemical and bacterial properties of feedlot cattle manure

Nutrients, soluble salts, and pathogenic bacteria in feedlot-pen manure have the potential to cause pollution of the environment. A three-year study (1998-2000) was conducted at a beef cattle (Bos taurus) feedlot in southern Alberta, Canada to determine the effect of bedding material [barley (Hordeum vulgare L.) straw versus wood chips] and season on the chemical and bacterial properties of pen-floor manure. Manure was sampled for chemical content (N, P, soluble salts, electrical conductivity, and pH) and populations of four groups of bacteria (Escherichia coli, total coliforms, and total aerobic heterotrophs at 27 and 39 degrees C). More chemical parameters of manure were significantly (P < or = 0.05) affected by season (SO4, Na, Mg, K, Ca, sodium adsorption ratio [SAR], total C, NO3-N, NH4-N, total P, and available P) than by bedding (K, pH, total C, C to N ratio, NH4-N, and available P). Bedding had no significant (P > 0.05) effect on the four bacterial groups whereas season affected all four groups. Numbers of E. coli and total coliforms (TC) were significantly higher by 1.72 to 2.02 log10 units in the summer than the other three seasons, which was consistent with a strong positive correlation of E. coli and TC with air temperature. The low ratio of bedding to manure in the pens was probably the major cause of the lack of significant bedding effects. Bedding material and seasonal timing of cleaning feedlot pens and land application of manure may be a potential tool to manage nutrients, soluble salts, and pathogens in manure.     

Quantifying chlorinated ethene degradation during reductive dechlorination at Kelly AFB using stable carbon isotopes

Stable isotope analysis of chlorinated ethene contaminants was carried out during a bioaugmentation pilot test at Kelly Air Force Base (AFB) in San Antonio Texas. In this pilot test, cis-1,2-dichloroethene (cDCE) was the primary volatile organic compound. A mixed microbial enrichment culture, KB-1, shown in laboratory experiments to reduce chlorinated ethenes to non-toxic ethene, was added to the pilot test area. Following bioaugmentation with KB-1, perchloroethene (PCE), trichloroethene (TCE) and cDCE concentrations declined, while vinyl chloride (VC) concentrations increased and subsequently decreased as ethene became the dominant transformation product. Shifts in carbon isotopic values up to 2.7 per thousand, 6.4 per thousand, 10.9 per thousand and 10.6 per thousand were observed for PCE, TCE, cDCE and VC, respectively, after bioaugmentation, consistent with the effects of biodegradation. While a rising trend of VC concentrations and the first appearance of ethene were indicative of biodegradation by 72 days post-bioaugmentation, the most compelling evidence of biodegradation was the substantial carbon isotope enrichment (2.0 per thousand to 5.0 per thousand) in ?13C(cDCE). Fractionation factors obtained in previous laboratory studies were used with isotope field measurements to estimate first-order cDCE degradation rate constants of 0.12 h(-1) and 0.17 h(-1) at 115 days post-bioaugmentation. These isotope-derived rate constants were clearly lower than, but within a factor of 2-4 of the previously published rate constant calculated in a parallel study at Kelly AFB using chlorinated ethene concentrations. Stable carbon isotopes can provide not only a sensitive means for early identification of the effects of biodegradation, but an additional means to quantify the rates of biodegradation in the field.     

2,4,6-Trinitrotoluene detection using recombinant antibodies

The ability to detect low levels of 2,4,6-trinitrotoluene (TNT) in aqueous samples is important due to the toxicity of both TNT and its breakdown products. We have been characterizing recombinant anti-TNT antibodies isolated from the Griffin library of phage displayed scFvs by selection for binders to the TNT-surrogate 2,4,6-trinitrobenzene (TNB) coupled to the protein bovine serum albumin. Two candidate antibody fragments, TNB1 and TNB2, were isolated and evaluated by ELISA for their ability to bind to TNB coupled to the protein ovalbumin. Competition ELISA was then used to demonstrate antibody fragment binding to TNT in solution and to examine cross-reactivity towards several TNT-related compounds and other explosives. Both recombinant antibody fragments were incorporated into a continuous flow assay for the detection of TNT. TNB2, the best single chain antibody, showed a limit of detection of 1 ng ml(-1), comparable to a commercially available anti-TNT antibody in the same assay format.     

Establishing the propensity for dioxin formation using a plume temperature model for medical waste incinerator emissions in developing countries

Air pollution control devices (APCDs) are not compulsory for medical waste incinerators (MWIs) in developing countries. In South Africa, combustion gases are usually vented directly to the atmosphere at temperatures greater than the formation temperature of dioxin. The possibility of dioxin formation outside the incinerator stack has been hypothesized. A plume model has been developed and tested in the wind tunnel with a scale model of an incinerator stack. The plume temperature and trajectory predictions of the plume model were verified within a +/- 3% experimental accuracy. Using South African data, the plume model predicts that the residence time of gases in the temperature range of 150-450 degrees C in a plume is 1.3 sec on average for 5% of a year (18 days) at meteorological conditions resulting in wind speeds of less than 1 m/sec. Two published dioxin formation models were used to assess the probability of dioxin formation in the plume. The formation models predict that the average polychlorinated dibenzodioxins/furans (PCDD/Fs) formed in the plume will exceed the stack emission regulations in South Africa of 0.2 ng/Nm3 toxic equivalent quotient (TEQ) by between 2 and 40 times. The calculated concentrations do not include additional gaseous PCDD/F compounds that may be formed at high-temperature post-combustion zones through pyrosynthesis mechanisms.     

A Method for Constructing a Social Vulnerability Index: An Application to Hurricane Storm Surges in a Developed Country

An important goal of vulnerability assessment is to create an index of overall vulnerability from a suite of indicators. Constructing a vulnerability index raises several problems in the aggregation of these indicators, including the decision of assigning weights to them. The purpose of this paper is to demonstrate a method of aggregating vulnerability indicators that results in a composite index of vulnerability, but that avoids the problems associated with assigning weights. The investigators apply a technique based on Pareto ranking to a complex, developed socioeconomic landscape exposed to storm surges associated with hurricanes. Indicators of social vulnerability to this hazard are developed and a principal components analysis is performed on proxies for these indicators. Overall social vulnerability is calculated by applying Pareto ranking to these principal components. The paper concludes that it is possible to construct an effective index of vulnerability without weighting the individual vulnerability indicators.