Treatment and use of air pollution control residues from MSW incineration: an overview

This work reviews strategies for the management of municipal solid waste incineration (MSWI) residues, particularly solid particles collected from flue gases. These tiny particles may be retained by different equipment, with or without additives (lime, activated carbon, etc.), and depending on the different possible combinations, their properties may vary. In industrial plants, the most commonly used equipment for heat recovery and the cleaning of gas emissions are: heat recovery devices (boiler, superheater and economiser); dry, semidry or wet scrubbers; electrostatic precipitators; bag filters; fabric filters, and cyclones. In accordance with the stringent regulations in force in developed countries, these residues are considered hazardous, and therefore must be treated before being disposed of in landfills. Nowadays, research is being conducted into specific applications for these residues in order to prevent landfill practices. There are basically two possible ways of handling these residues: landfill after adequate treatment or recycling as a secondary material. The different types of treatment may be grouped into three categories: separation processes, solidification/stabilization, and thermal methods. These residues generally have limited applications, mainly due to the fact that they tend to contain large quantities of soluble salts (NaCl, KCl, calcium compounds), significant amounts of toxic heavy metals (Pb, Zn, Cr, Cu, Ni, Cd) in forms that may easily leach out, and trace quantities of very toxic organic compounds (dioxin, furans). The most promising materials for recycling this residue are ceramics and glass-ceramic materials. The main purpose of the present paper is to review the published literature in this field. A range of studies have been summarized in a series of tables focusing upon management strategies used in various countries, waste composition, treatment processes and possible applications.     

Mineralization of the biocide chloroxylenol by electrochemical advanced oxidation processes

Electrochemical advanced oxidation processes (EAOPs) are environmentally friendly methods based on the destruction of organic pollutants in wastewaters with in situ electrogenerated hydroxyl radical. This species is formed in anodic oxidation (AO) from water oxidation at the anode and in indirect electro-oxidation methods like electro-Fenton (EF) and photoelectro-Fenton (PEF) also from reaction between catalytic Fe2+ and H2O2 continuously produced at the O2-diffusion cathode. The PEF method involves the irradiation of the treated solution with UVA light to enhance the photolysis of organics including Fe(III) complexes. In this work, the oxidation power of such EAOPs to decontaminate synthetic wastewaters of the biocide chloroxylenol (4-chloro-3,5-dimethylphenol) at pH 3.0 is comparatively examined with an undivided electrolytic cell containing a Pt or boron-doped diamond (BDD) anode and a stainless steel or O2-diffusion cathode. The initial chlorine is released as Cl(-) ion, which remains stable in the medium using Pt or is oxidized to Cl2 on BDD. The biocide solutions can be completely decontaminated using AO with a BDD anode, as well as PEF with a Pt or BDD anode. The PEF procedure with a BDD anode is the most powerful method leading to total mineralization in about 300 min, practically independent of current density. When current density rises, the degradation rate of processes increases, but they become less efficient due to the larger enhancement of waste reactions of oxidants. Chloroxylenol is much more rapidly removed in EF and PEF than in AO. 2,6-dimethylhydroquinone, 2,6-dimethyl-p-benzoquinone and 3,5-dimethyl-2-hydroxy-p-benzoquinone are identified as aromatic by-products, and maleic, malonic, pyruvic, acetic and oxalic acids are found as generated carboxylic acids. A general pathway for chloroxylenol mineralization by all EAOPs including the above by-products is proposed.     

Pharmaceutical compound removal efficiency by a small constructed wetland located in south Brazil

Environmental Science and Pollution Research - The fate of pharmaceuticals during the treatment of effluents is of major concern since they are not completely degraded and because of their...     

Transabdominal chorionic villus sampling: Fetal loss rate in relation to maternal and gestational age

In this paper we report the fetal loss rate in relation to both maternal and gestational age in 1764 pregnant women who underwent transabdominal chorionic villus sampling (TA-CVS) between January 1986 and August 1990. The fetal loss rate, considered as a proportion of continuing pregnancies, decreased with advancing gestational age at sampling from 4.3 per cent before 9 weeks to 0.4 per cent at or after 13 weeks, the difference being statistically significant (p <0.025). The fetal loss rate increased from 1.6 per cent in women under 30 to 2.4 per cent in women of 40 years or over, but the difference was not statistically significant. Considering that the total fetal loss rate before 28 weeks' gestation was on average 1.91 percent (1.3 per cent under 35 years and 2.8 per cent in women of 35 or over), we believe that TA-CVS is a safe and effective technique for prenatal diagnosis of genetic diseases.     

Amino and fatty acid dynamics of<Emphasis Type="Italic"> Lysmata seticaudata</Emphasis> (Decapoda: Hippolytidae) embryos during early and late reproductive season

The present study investigates amino and fatty acid dynamics of embryos of different-sized simultaneous hermaphrodite shrimp (SH) (Lysmata seticaudata) during early (ERS) and late reproductive seasons (LRS). A significant relative decrease in total amino acids and essential amino acids (EAA) was recorded (P<0.05) during the development of embryos produced by shrimp collected during ERS and LRS. The content of non-essential amino acids (NEAA) showed a smaller variation, without a marked decrease. During the last embryonic stage, the major EAAs of embryos were, in decreasing magnitude, lysine and arginine, while the major NEAAs were glutamic acid and valine. A substantial decrease in lipid content (P<0.05) was observed, and the quantitatively more important fatty acids were the saturates 16:0 and 18:0, the monounsaturates 18:1n-9 and 18:1n-7 and the polyunsaturates 20:4n-6 (arachidonic acid, ARA), 20:5n-3 (eicosapentaenoic acid, EPA) and 22:6n-3 (docosahexaenoic acid, DHA). Monounsaturates were used at a higher rate, and embryos produced by SH shrimp displayed similar consumption rates of saturated and polyunsaturated fatty acids. Considering individual fatty acids, no clear utilization pattern between different-sized SH shrimp in ERS and LRS was recorded. The inexistence of consistent differences between amino and fatty acid utilization during embryogenesis among different-sized SH shrimp in ERS and LRS emphasizes the variability affecting offspring in decapod crustaceans.Communicated by S.A. Poulet, Roscoff     

Intracellular localization and binding of technetium-95m in the seastar Marthasterias glacialis

The subcellular distribution of technetium was studied using the seastar Marthasterias glacialis which had previously ingested prey labelled with ^95mTc either as pertechnetate (VII) or in the reduced state (IV). The majority of the Tc [98% (IV) and 96% (VII)] was taken up and retained in the pyloric caeca, the gland responsible for digestive and food storage processes. Differential centrifugation and separation techniques have demonstrated that, at the subcellular level, technetium in the pyloric caeca was largely associated with the lysosomes. ^95mTc (IV) was distributed between the lysosomes and the soluble fraction to roughly the same degree, whereas pertechnetate was more strongly associated with the lysosomal fraction. Chromatography of the cytosol by gel filtration indicated the presence of two distinct protein compounds which were responsible for binding virtually all of the technetium in the soluble fraction. Technetium had a greater relative affinity for the low molecular weight compound, more so for Tc (VII) than for Tc (IV). This anionic protein had an apparent molecular weight of approximately 10 000, and thus may play a role in metal detoxification mechanisms at the cellular level.     

Differential responses of benthic microbes and meiofauna to fish-farm disturbance in coastal sediments

Bacterial and meiofaunal abundance and biomass and their response to the disturbance induced by fish-farm biodeposition were investigated from March to October 1997 on a monthly basis at two stations of the Gaeta Gulf (Tyrrhenian Sea, Mediterranean Sea). The biopolymeric fraction of the organic matter was characterized by high concentrations which was similar at both fish-farming-impacted and control stations. Similarly, bacteria accounted for a small fraction of the biopolymeric organic carbon (< 1%), while the contribution due to auto-fluorescent cell biomass (i.e. prokaryotic and eukaryotic cells displaying auto-fluorescence) to the total biopolymeric carbon was quantitatively negligible (< 0.1%). Benthic bacteria appear to be sensitive to organic enrichment as their abundance increased significantly beneath the cage, whilst numbers of meiofauna was lower than in the control. Changes occurred also in terms of individual nematode biomass that increased as result of the biodeposition. A particularly useful tool appeared to be represented by the ratio of benthic auto-fluorescent cells to bacterial abundance, bacteria to meiofaunal biomass and auto-fluorescent cells to meiofauna biomass. All these parameters described well the impact due to biodeposition on the benthic environment as their ratios displayed significantly higher values in farm sediments, but recovered rapidly (15 days) to values observed in the control (i.e. undisturbed conditions) immediately after cage removal. Changes observed in the present study highlight that the increased organic loading determined a shift of the relative contribution of the different benthic components to the total biopolymeric carbon, so that in highly impacted systems total benthic biomass becomes increasingly dominated by microbial components.     

Cadmium uptake and translocation in tumbleweed (Salsola kali), a potential Cd-hyperaccumulator desert plant species: ICP/OES and XAS studies

Cadmium is a heavy metal, which, even at low concentrations, can be highly toxic to the growth and development of both plants and animals. Plant species vary extensively in their tolerance to excess cadmium in a growth medium and very few cadmium-tolerant species have been identified. In this study, tumbleweed plants (Salsola kali) grown in an agar-based medium with 20 mgl(-1) of Cd(II) did not show phytotoxicity, and their roots had the most biomass (4.5 mg) (P < 0.05) compared to the control plants (2.7 mg) as well as other treated plants. These plants accumulated 2696, 2075, and 2016 mg Cd kg(-1) of dry roots, stems, and leaves, respectively. The results suggest that there is no restricted cadmium movement in tumbleweed plants. In addition, the amount of Cd found in the dry leaf tissue suggests that tumbleweed could be considered as potential cadmium hyperaccumulating species. X-ray absorption spectroscopy studies demonstrated that in roots, cadmium was bound to oxygen while in stems and leaves, the metal was attached to oxygen and sulfur groups. This might imply that some small organic acids are responsible for Cd transport from roots to stems and leaves. In addition, it might be possible that the plant synthesizes phytochelatins in the stems, later coordinating the absorbed cadmium for transport and storage in cell structures. Thus, it is possible that in the leaves, Cd either exists as a Cd-phytochelatin complex or bound to cell wall structures. Current studies are being performed in order to elucidate the proposed hypothesis.     

Computation of the interfacial area for two-fluid porous medium systems

We develop a method to compute interfacial areas from three-dimensional digital representations of multiphase systems. We approximate the interfaces with the isosurface generated by the standard marching-cube algorithm from the discrete phase distribution. We apply this approach to two-fluid pore-scale simulations by (1) simulating a random packing of spheres that obeys the grain-size distribution and porosity of an experimental porous medium system, and (2) using a previously developed pore-morphology-based model in order to predict the phase distribution for a water-wet porous medium that undergoes primary drainage. The predicted primary drainage curve and interfacial areas are in good agreement with the experimental values reported in the literature, where interfacial areas were measured using interfacial tracers. The energy dissipation during Haines jumps is significant: thus, the mechanical work done on the system is not completely converted into surface energy, and interfacial areas may not be deduced from the primary drainage curve.     

Tracking the anthropogenic drivers of ecological impacts

Despite the pivotal role human factors (anthropogenic drivers) are presumed to play in global environmental change, substantial uncertainties and contradictory conclusions about them continue. We attempt to further discipline the human factors issue by estimating the effects of two anthropogenic drivers, population and affluence, on a wide variety of global environmental impacts, including greenhouse gas emissions, emissions of ozone depleting substances, and the ecological footprint. Population proportionately increases all types of impacts examined. Affluence typically increases impacts, but the specific effect depends on the type of impact. These findings refocus attention on population and material affluence as principal threats to sustainability and challenge predictions of an ameliorating effect of rising affluence on impacts.