Composites Produced from Natural Rubber and Chrome-Tanned Leather Wastes: Evaluation of their In Vitro Toxicological Effects for Application in Footwear and Textile Industries

A new composite has been developed from natural rubber and chrome-tanned leather waste for use in footwear and textile industries. The contribution of this material to environmental quality and sustained development should be highligh because chrome tanned leather wastes, a major environmental problem, can be recycled. However, the safety of this new material for human use is questionable, as it is already well reported in the literature that chromium, particularly in its hexavalent oxidation state, can be genotoxic and carcinogenic to living beings. Thus, the aim of this study was to evaluate in vitro biocompatibility of this composite material for possible use in the footwear and textile industries, through cytotoxicity, cell adhesion, and genotoxicity tests. Inductively coupled plasma optical emission spectrometry (ICP-OES) was used to measure both concentrations of total and hexavalent chromium. Based on the findings, it was concluded that the composite exhibits low levels of cytotoxicity and genotoxicity, and possesses favorable properties for initial cell adhesion. Furthermore, it was verified that the composites released low concentrations of chromium and that the predominant species released would be trivalent chromium. The results of the present study open the possibility of the incorporation of solid residues of tanned leather into chromium without necessarily the chromium contained in these residues influences the toxicity and genotoxicity of this new material.     

Lead (Pb) quantification in potable water samples: implications for regulatory compliance and assessment of human exposure

Assessing the health risk from lead (Pb) in potable water requires accurate quantification of the Pb concentration. Under worst-case scenarios of highly contaminated water samples, representative of public health concerns, up to 71–98 % of the total Pb was not quantified if water samples were not mixed thoroughly after standard preservation (i.e., addition of 0.15 % (v/v) HNO₃). Thorough mixing after standard preservation improved recovery in all samples, but 35–81 % of the total Pb was still un-quantified in some samples. Transfer of samples from one bottle to another also created high errors (40–100 % of the total Pb was un-quantified in transferred samples). Although the United States Environmental Protection Agency’s standard protocol avoids most of these errors, certain methods considered EPA-equivalent allow these errors for regulatory compliance sampling. Moreover, routine monitoring for assessment of human Pb exposure in the USA has no standardized protocols for water sample handling and pre-treatment. Overall, while there is no reason to believe that sample handling and pre-treatment dramatically skew regulatory compliance with the US Pb action level, slight variations from one approved protocol to another may cause Pb-in-water health risks to be significantly underestimated, especially for unusual situations of “worst case” individual exposure to highly contaminated water.     

The safety policies and practices of community multi-purpose recreation facilities

This research investigated the under-explored area of safety in multi-purpose recreation facilities (MPRFs). Facility managers and other managerial staff (key informants) from four MPRFs in Victoria, Australia participated in semi-structured interviews. Safety was considered important from Occupational Health and Safety (OH&S), business viability and legal liability perspectives but not from a health promotion or public health point of view. Most implemented injury prevention measures required gymnasium and pool staff or users to change their behaviours. Awareness of safety standards was higher for some operational areas (e.g. aquatics, child-care) than others (e.g. gymnasium, group fitness activities). Key informants struggled to keep abreast of legislation changes and they relied on commercial, regulatory, and industry information sources rather than evidence of best practice. Reported factors influencing safety in MPRFs were classified into three types: internal (e.g. training, culture); external (e.g. weather, demographic change); and governance (e.g. insurance, industry standards). Comprehensive, relevant and accessible industry safety standards, which focus not only on OH&S but equally on health promotion principles and public health perspectives linked to injury prevention, are required. Training is needed to reflect these broader and equally important perspectives. Health/injury, fitness/recreation and insurance sector links should be improved to ensure a consistent, sustainable approach to safety.     

Monitoring of heavy metal levels in roadside dusts of Thessaloniki, Greece in relation to motor vehicle traffic density and flow

In recent years, the level of heavy metal pollution in urban areas has been of considerable concern. The principal source has been attributed to the motor vehicle and increasing inner city congestion, which has lead to a change and enlargement of transport stop-start zones. These areas of high traffic density are associated with an increased release of heavy metals into the adjacent residential or commercial areas. Seventy-five roadside dust samples were collected throughout the inner city and by-pass motorway areas of Thessaloniki, Northern Greece. Samples were taken from arterial, major and minor roads, as well as the ring road, to compare and contrast the levels of heavy metals, namely Cu, Zn, Cd, Mn and Pb. Flame Atomic Absorption Spectroscopy (FAAS) was developed to quantitatively determine concentrations of both total element and geochemical fractionation, within the two dust particulate fraction sizes <75 microm and 75-125 microm. Acid digestion using Aqua Regia (3:1 conc. HCl:HNO(3)) was employed for the total elemental analysis, a method that was validated through the use of certified reference materials (CRM). Fractionation studies involved a three-step sequential extraction method performed on five selected samples (representatives of high, mid and low total elemental concentrations). The resultant solutions were analysed for lead and zinc levels to ascertain fractionation throughout the different geochemical fractions, thus assessing bioavailability.It was found that congestion/stop-start traffic patterns did influence and have led to increased levels of heavy metal deposition along inner city roads compared to levels observed on the new relief ring road. Dust particulate fraction sizes were only found to show statistically significant differences in cadmium and manganese, at the probability P < 0.001 or 99.9% confidence limit. Both Cd and Mn showed higher total levels in the smaller fraction sizes (<75 microm), implying that their major release source is exhaust emissions. There were no significant differences in the other elements, at the P > 0.05 or 95% confidence limit. Road type was seen to have little affect on cadmium and manganese, though lead, copper and zinc were all found to show higher levels on the inner city routes. This can be related back to the wear-and-tear of vehicle components as a result of the stop-start traffic patterns (brake pads etc). Both Pb and Zn have shown to be in chemical forms that are bio available to ecosystems.     

Valuing third sector sustainability organisations – qualitative contributions to systemic social transformation

The number and diversity of civil society or third sector sustainability organisations (TSSOs) have increased in recent decades. TSSOs play a prominent role in local approaches to sustainability. However, the contributions made by TSSOs are not fully understood, beyond a limited suite of quantifiable outputs and impacts. In this qualitative study, we examine how four TSSOs from two Australian regions, Tasmania and Queensland's Sunshine Coast, contribute to social transformation beyond discrete outputs. We examine the operation, ethos, scope and influence of these organisations over time. In so doing, we identify three common ways in which these organisations facilitate social change: by (i) enhancing social connectivity through boundary work; (ii) mobilising participatory citizenship and (iii) contributing to social learning. We conclude that TSSOs contribute significantly to the systemic social conditions that enable change for sustainability and the development of community resilience and well-being, but do so in ways undervalued by existing metrics, formal evaluation processes and funding models. Clearer recognition of, and strategic emphasis on, these qualitative contributions to social transformation is vital in ensuring that TSSOs remain viable and effective over the long term.     

In situ bioremediation of an aniline spill in an industrial setting

In situ remediation of aniline from soils and groundwater using biological and physical treatments was conducted at the BASF Corporation facility in Geismar, Louisiana. To mitigate the migration of aniline, remediate contaminated soil and groundwater, and determine concentrations, 24 immobilized microbe bioreactors were fixed in the subsoil, and a horizontal recovery well and 7 monitoring wells were installed. Soil and monitoring wells were sampled quarterly to assess bioplug impact on the aniline concentrations. The recovery well was sampled monthly to estimate the pounds of aniline removed from groundwater. Soil pH, composition, and microbial counts were used to estimate the fate and transport. Aniline levels were lowered significantly after remediation and total cancer risk was below levels for industrial sites, as established by State of Louisiana Risk Evaluation/Corrective Action Program guidelines. © 2010 Wiley Periodicals, Inc.     

Sub-lethal exposure to ultraviolet radiation reduces prey consumption by Atlantic cod larvae (Gadus morhua)

Levels of ultraviolet-B radiation (UV-B: 280–315 nm) reaching the earth’s surface have increased over the past few decades due to ozone depletion. It is well documented that exposure to UV-B radiation increases mortality in marine fish larvae. However, few studies have examined sub-lethal effects of UV-B radiation such as, for example, the possibility that it affects prey consumption by fish larvae. Atlantic cod larvae were exposed to a sub-lethal level of ultraviolet-B radiation (UV-B: 280–315 nm) for 15 h. After the exposure, rotifers (4/mL) were fed to cod larvae at three different post-exposure intervals (20 min, 3 and 6 h). Trials were replicated three times for each post-exposure interval. The number of rotifers in the gut and the percent of empty guts (number of fish with empty gut/number of fish examined × 100) were analyzed. Results were compared to those of unexposed fish (the control treatment). UV-B exposed cod larvae had consumed significantly fewer rotifers than control fish at all post-exposure intervals. There was no significant difference in the frequency of empty guts between fish in the UV-B treatment versus fish in the control treatment at any of the post-exposure time points (although the difference at 20 min post-exposure was borderline significant). These observations suggest that cod larvae exposed to sub-lethal levels of UV-B have lower net energy gain which may lead to reduced growth rate and possibly poorer survival.