Taxing Meat: Taking Responsibility for One’s Contribution to Antibiotic Resistance

Antibiotic use in animal farming is one of the main drivers of antibiotic resistance both in animals and in humans. In this paper we propose that one feasible and fair way to address this problem is to tax animal products obtained with the use of antibiotics. We argue that such tax is supported both by (a) deontological arguments, which are based on the duty individuals have to compensate society for the antibiotic resistance to which they are contributing through consumption of animal products obtained with the use of antibiotics; and (b) a cost-benefit analysis of taxing such animal products and of using revenue from the tax to fund alternatives to use of antibiotics in animal farming. Finally, we argue that such a tax would be fair because individuals who consume animal products obtained with the use of antibiotics can be held morally responsible, i.e. blameworthy, for their contribution to antibiotic resistance, in spite of the fact that each individual contribution is imperceptible.     

Fate of azadirachtin A and related azadirachtoids on tomatoes after greenhouse treatment

The degradation of the main azadirachtoids on tomatoes was studied after greenhouse treatment. These experiments were carried out at 1 and 5× the concentration recommended by the manufacturer. In all experiments the deposition of azadirachtin A (AZA-A) was below the maximum residue level (MRL). Even if at the highest dose, AZA-A half-life time calculated as pseudo first order kinetic was 1.2 days in agreement with the recommended preharvest interval (PHI) of 3 days. Experiments with a model system showed that sunlight photodegradation is the main factor influencing the rate of disappearance of AZA-A after greenhouse treatment while tomato epicuticular waxes doubled the photodegradation rate of AZA-A in a commercial formulation.     

羧酸盐型双子表面活性剂的合成及性能研究

以月桂酰氯、乙二胺与丁二酸酐为原料合成了一种羧酸盐型双子(gemini)表面活性剂。采用IR、1 HNMR对中间产物和目标产物进行结构表征,并考察了合成所得羧酸盐型gemini表面活性剂的表面活性。结果表明:合成产物即为目标产物。合成产物的临界胶束浓度为0.027mmol/L,比普通单链表面活性剂低2～3个数量级,表面张力最低可降至29.5mN/m。     

Cornmeal-induced resistance to ciprofloxacin and erythromycin in enterococci

Triclosan is used as an antibacterial agent in household items and personal care products. Since this compound is found in maternal milk of humans and bodies of wild animals, there is growing concern among some consumer groups and scientific community that triclosan is adverse for humans and wild animals. In order to estimate adverse actions of triclosan, the effects of triclosan on intracellular Zn²⁺ concentration and cellular thiol content were studied in rat thymocytes by the use of flow cytometer with appropriate fluorescent probes. Triclosan at 1-3 μM (sublethal concentrations) increased the intensity of FluoZin-3 fluorescence (intracellular Zn²⁺ concentration) and decreased the intensity of 5-chloromethylfluorescein (5-CMF) fluorescence (cellular thiol content). Negative correlation (r = −0.985) between triclosan-induced changes in FluoZin-3 and 5-CMF fluorescences was found. Removal of external Zn²⁺ did not significantly affect the triclosan-induced augmentation of FluoZin-3 fluorescence, suggesting an intracellular Zn²⁺ release by triclosan. These actions of triclosan were similar to those of H₂O₂ and triclosan significantly potentiated the cytotoxicity of H₂O₂. Therefore, the results may suggest that triclosan at sublethal concentrations induces oxidative stress that decreases cellular thiol content, resulting in an increase in intracellular Zn²⁺ concentration by Zn²⁺ release from intracellular store(s). Since recent studies show many physiological roles of intracellular Zn²⁺ in cellular functions, the triclosan-induced disturbance of cellular Zn²⁺ homeostasis may induce adverse actions on the cells.     

清浊分流条件下的混凝-臭氧处理棉针织印染清废水

根据污染源头控制和废水回用的要求,对典型棉针织染整厂的不同生产过程废水排水水质特征进行了统计分析,提出了较实用的废水源头清浊分流方案。在此基础上重点研究了混凝-臭氧组合工艺对清废水处理效果,确定了最优的工艺条件。结果表明,清废水主要为洗水,占废水总量的25%～30%;混凝-臭氧组合工艺的最优工艺条件为：pH为6～9,PAC投加量为48 mg/L,PAM投加量为1.0 mg/L,臭氧接触时间为12 min（臭氧浓度为14.5 mg/L）,这时,清废水COD、色度去除率分别为71%和98%,实践证明,出水水质完全能够满足染整生产。     

WRF-Chem simulation of East Asian air quality: Sensitivity to temporal and vertical emissions distributions

This study develops fine temporal (seasonal, day-of-week, diurnal) and vertical allocations of anthropogenic emissions for the TRACE-P inventory and evaluates their impacts on the East Asian air quality prediction using WRF-Chem simulations in July 2001 at 30-km grid spacing against available surface measurements from EANET and NEMCC. For NO₂ and SO₂, the diurnal and vertical redistributions of emissions play essential roles, while the day-of-week variation is less important. When all incorporated, WRF-Chem best simulates observations of surface NO₂ and SO₂ concentrations, while using the default emissions produces the worst result. The sensitivity is especially large over major cities and industrial areas, where surface NO₂ and SO₂ concentrations are reduced by respectively 3–7 and 6–12 ppbv when using the scaled emissions. The incorporation of all the three redistributions of emissions simulates surface O₃ concentrations higher by 4–8 ppbv at night and 2–4 ppbv in daytime over broad areas of northern, eastern and central China. To this sensitivity, the diurnal redistribution contributes more than the other two.     

Comprehensive analysis of the carbon impacts of vehicle intelligent speed control

In recent years sophisticated technologies have been developed to control vehicle speed based on the type of road the vehicle is driven on using Global Positioning Systems and in-car technology that can alter the speed of the vehicle. While reducing the speed of road vehicles is primarily of interest from a safety perspective, vehicle speed is also an important determinant of vehicle emissions and thus these technologies can be expected to have impacts on a range of exhaust emissions. This work analyses the results from a very large, comprehensive field trial that used 20 instrumented vehicles with and without speed control driven almost 500,000 km measuring vehicle speed at 10 Hz. We develop individual vehicle modal emissions models for CO₂ for 30 Euro III and Euro IV cars at a 1-Hz time resolution. Generalized Additive Models were used to describe how emissions from individual vehicles vary depending on their driving conditions, taking account of variable interactions and time-lag effects. We quantify the impact that vehicle speed control has on-vehicle emissions of CO₂ by road type, fuel type and driver behaviour. Savings in CO₂ of ≈6% were found on average for motorway-type roads when mandatory speed control was used compared with base case conditions. For most other types of road, speed control has very little effect on emissions of CO₂ and in some cases can result in increased emissions for low-speed limit urban roads. We also find that there is on average a 20% difference in CO₂ emission between the lowest and highest emitting driver, which highlights the importance of driver behaviour in general as a means of reducing emissions of CO₂.     

Spatial distribution of perfluoroalkyl acids in the Pearl River of Southern China

An intensive campaign was conducted in September 2012 to collect surface water samples along the tributaries of the Pearl River in southern China. Thirteen perfluoroalkyl acids (PFAAs), including perfluorocarboxylates (PFCAs, C4–C11) and perfluorosulfonates (PFSAs, C4, C6–C8, and C10), were determined using high-performance liquid chromatography/negative electrospray ionization–tandem mass spectrometry (HPLC/(-)ESI–MS/MS). The concentrations of total PFAAs (ΣPFAAs) ranged from 3.0 to 52 ng L⁻¹, with an average of 19 ± 12 ng L⁻¹. The highest concentrations of ΣPFAAs were detected in the surface water of the Dong Jiang tributary (17–52 ng L⁻¹), followed by the main stream (13–26 ng L⁻¹) and the Sha Wan stream (3.0–4.5 ng L⁻¹). Perfluorooctanoate (PFOA), perfluorobutane sulfonate (PFBS), and perfluorooctane sulfonate (PFOS) were the three most abundant PFAAs and on average accounted for 20%, 24%, and 19% of ΣPFAAs, respectively. PFBS was the most abundant PFAA in the Dong Jiang tributary, and PFOA was the highest PFAA in the samples from the main stream of the Pearl River. A correlation was found between PFBS and PFOA, which suggests that both of these PFAAs originate from common source(s) in the region. Nevertheless, the slope of PFBS/PFOA was different in the different tributaries sampled, which indicates a spatial difference in the source profiles of the PFAAs.     

The Inhibition of Photochemical Smog I. Inhibition by Phenol,Benzaldehyde, and Aniline

In urban atmospheres hydrocarbons promote the conversion of NO to NO₂ under the influence of sunlight, ultimately giving rise to photochemical smog. The conversion results from a long chain process with HO radicals as the chain carrier. If this chain could be interrupted by suitable radical traps, the formation of photochemical smog would be inhibited. In this paper we report the results of studies using phenol, benzaldehyde, and aniline as inhibitors. Mixtures containing 16 mTorr C₃H₆, 8 mTorr NO, ～85 Torr 0₂, and the addi tives were irradiated at 25°C. The NO₂ pressure was monitored photometrically. In the absence of additive, the NO2 pressure first increases with irradiation time reaching a maximum conversion corresponding to 70% of the NO at 1 2 minutes. As the radiation time is lengthened, the NO₂ pressure drops. With the additive present, the formation of NO₂ is delayed. The time to reach the maximum percent conversion of NO to N0₂ becomes 20, 22, 31, and 40 minutes respectively, for 13 mTorr C₆H₅OH, 2 mTorr C₆H₅CHO, 8 mTorr C₆H₅CHO, and 4.1 mTorr C₆H₅NH₂ added. The problems and possibilities of adding inhibitors to the atmosphere to control air pollution are discussed.     

The Inhibition of Photochemical Smog

Additional inhibitors for the conversion of NO to NO₂ in C3H6—NO—0₂ irradiated mixtures have been tested at 25°C. These mixtures initially contained 16 mTorr C₃H₆, 8 mTorr NO, 0.012 mTorr NO₂, additive, and enough O₂ to bring the total pressure to 100 Torr. The NO₂ pressure was monitored photometrically. In the absence of additive, the NO₂ pressure first increases with irradiation time reaching a maximum conversion at about 15 minutes. As the irradiation time increases beyond 15 min, the NO₂ pressure drops. Before adding the inhibitors, runs were done with 10 Torr of CO added, and in these runs the conversion was speeded so that the maximum in NO₂ pressure occurred at 10 min. This enhancement in conversion rate is considered to be diagnostic for the presence of HO radicals. Next 10-min irradiations were done with various amounts of hexafluorobenzene (C₆F₆), nitrobenzene (C₆H₅NO₂), or naphtha lene (C₁₀H₈) added. The NO₂ pressure was reduced to one-half its value in the absence of inhibitor with 270 mTorr C₆F₆’, 220 mTorr C₆H₅N0₂, or 4 mTorr C₁₀Hg. The C₁₀H₈ is a very efficient inhibitor, but additions of up to 1 8.5 mTorr C₁₀H₈ did not reduce the N0₂ pressure to zero. Studies of the percent conversion of NO to NO₂ vs. irradiation time were done with either 4.2 mTorr C₁₀H₈ or 40 mTorr 2,6-di-ferf-butyl-4-methylphenol (Ph) added. In the former case the peak conversion was delayed from 15 to 22 min, while in the latter case no delay occurred. However, with the Ph added, there appeared to be some reduction in the maximum value of percent conversion.