Quantification of ionophores in aged poultry litter using liquid chromatography tandem mass spectrometry

Veterinary anticoccidials, biochemically known as ionophores, are widely used in poultry feed at therapeutic levels to treat Coccidiosis and at sub-therapeutic levels for growth- promotion. Commonly used ionophores in the US poultry industry are monensin, salinomycin, lasalocid and narasin. There is an increasing concern regarding the persistence of these anticoccidials in the environment. However, little attention has been directed to methods development for quantitatively measuring ionophores in complex environmental matrices such as poultry litters that are land applied. Here, we describe a rapid and sensitive liquid chromatography tandem mass spectrometry (LC-MS/MS)-based method developed for simultaneous quantification of monensin, lasalocid, salinomycin, and narasin in aged poultry litter samples. Results show significant level of monensin (97.8 ± 3.2 μg kg^?1), lasalocid (19.2 ± 6.6 μg kg^?1), salinomycin (70 ± 2.7 μg kg^?1) and narasin (57.3 ± 2.6 μg kg^?1) in poultry litter stored for over three years at < 5°C. Our findings indicate that even after several years of unmanaged storage of poultry litter, ionophores may continue to persist in this matrix, raising the possibility of prolonged release into the environment.     

Selenium distribution and fluxes in intertidal wetlands, San Francisco Bay, California

Selenium (Se) concentrations exceeding ecological guidelines for sediments and suspended particulate matter (SPM) have been observed in the northern reach of the San Francisco Bay estuary. Longterm availability of elevated Se in wetland sediments depends in part on the fluxes controlling Se distribution. The relative contribution of sedimentary vs. post-depositional Se fluxes in two San Francisco Bay intertidal wetlands was estimated. Selenium concentrations on surface wetland sediments were compared with levels on SPM, and with previously established background levels in San Francisco Bay sediments. Sediment Se fluxes to the wetlands were measured directly using sediment traps. Although dissolved Se concentrations are higher than particulate Se concentrations in San Francisco Bay water, sediment input into the system provides the major flux of Se. Strong correlation between Se and C on SPM (r2 = 0.81) indicates the importance of organic particulate deposition. Dependence on sediment texture was qualitatively established by measuring Se on particle-size separates. Normalization to Al showed that 65% of Se spatial variability is related to sediment texture. Selenium is further enriched in the marsh via post-depositional inputs, probably due to in situ adsorption from overlying water and chemical reduction. According to sediment flux measurements, enrichment in the marsh is equivalent to 20 to 25% of the particulate Se flux, thereby defining the marsh as a Se sink. These findings highlight the need for more intensive monitoring of SPM as the major source of Se to intertidal wetlands.     

Population dynamics and reproduction of Mysella bidentata (Bivalvia: Galeommatacea) in Galway Bay,Irish west coast

Mysella bidentata (Montagu) is found in high densities in an Amphiura filiformis (O. F. Müller) community in Inner Galway Bay, west coast of Ireland. As part of an ongoing investigation at one station within this community, the population dynamics and reproductive pattern of this bivalve were investigated during the period November 1978-December 1981. Monthly sampling over the 3 yr period revealed a mean population density of 745±672 individuals m^-2. Recruitment occurred during August-October and three year-classes were identified. Growth rates were assessed by analysis of length-frequency histograms and winter growth checks. Individuals from the Y1 and Y2 year-classes functioned as hermaphrodites during the 1980 and 1981 reproductive seasons. The Y0 year-class contained both males and hermaphrodites. Results are compared with available information on the same species from other locations.Contribution No. 225 from the School of Marine Sciences, University College, Galway Ireland     

Broiler diet modification and litter storage: impacts on phosphorus in litters, soils, and runoff

Modifying broiler diets to mitigate water quality concerns linked to excess phosphorus (P) in regions of intensive broiler production has recently increased. Our goals were to evaluate the effects of dietary modification, using phytase and reduced non-phytate phosphorus (NPP) supplementation, on P speciation in broiler litters, changes in litter P forms during long-term storage, and subsequent impacts of diets on P in runoff from litter-amended soils. Four diets containing two levels of NPP with and without phytase were fed to broilers in a three-flock floor pen study. After removal of the third flock, litters were stored for 440 d at their initial moisture content (MC; 24%) and at a MC of 40%. Litter P fractions and orthophosphate and phytate P concentrations were determined before and after storage. After storage, litters were incorporated with a sandy and silt loam and simulated rainfall was applied. Phytase and reduced dietary NPP significantly reduced litter total P. Reducing dietary NPP decreased water-extractable inorganic phosphorus (IP) and the addition of dietary phytase reduced NaOH- and HCl-extractable organic P in litter, which correlated well with orthophosphate and phytic acid measured by 31P nuclear magnetic resonance (NMR), respectively. Although dry storage caused little change in P speciation, wet storage increased concentrations of water-soluble IP, which increased reactive P in runoff from litter-amended soils. Therefore, diet modification with phytase and reduced NPP could be effective in reducing P additions on a watershed scale. Moreover, efforts to minimize litter MC during storage may reduce the potential for dissolved P losses in runoff.     

Genetic basis of lethal junctional epidermolysis bullosa in an affected fetus: Implications for prenatal diagnosis in one family

Fetal skin biopsy at 20 weeks' gestation in a woman at risk for a child with the lethal skin-blistering disorder junctional epidermolysis bullosa (Herlitz) confirmed an affected fetus. Genomic DNA from the aborted fetus was examined for mutations in laminin 5, a macromolecule involved in adhesion at the dermal-epidermal junction, and a candidate protein in this condition. Polymerase chain reaction (PCR) amplification of exon 10 and parts of the flanking introns of the gene encoding the β3 chain of laminin 5 (LAMB3) and subsequent analysis by agarose gel electrophoresis showed a more slowly migrating band in the affected fetus compared with the normal control. Nucleotide sequencing of the abnormal PCR product revealed a homozygous 77 bp duplication within the exon, resulting in a premature termination codon 250 bp downstream from the 3′ end of the duplication. Maternal DNA was heterozygous for the mutant and wild-type alleles. These findings illustrate the genetic basis of the skin disease in this case and also offer the prospects of a simple, rapid, and reliable first-trimester DNA-based prenatal, or even preimplantation, diagnostic test for future pregnancies in this family.     

Zinc, copper and nickel concentrations in soil extracts and crops grown on four soils treated with metalloaded sewage sludges

Sludges containing high concentrations of zinc, copper or nickel and an uncontaminated sludge were added to two sandy loams (pH 6.5 and 7.1), a heavy clay (pH 6.3) and a calcareous clay (pH 7.8) to give ten sludge treatments for each soil. The mixtures were incubated fallow, cropped continuously with clover, or cropped with barley and red beet in rotation for 21 months. The quantity of added metal either in the soil solution or extracted by 0.1m CaCl(2) depended on the metal loading, pH and soil cation exchange capacity, and changed with time after mixing soils and sludges. Crop metal concentrations, and the occurrence of metal-induced yield reductions, also depended on soil properties as well as metal loading. The best chemical extractant for predicting plant metal concentrations was 0.1m CaCl(2).     

Copper uptake by Elsholtzia splendens and Silene vulgaris and assessment of copper phytoavailability in contaminated soils

Tolerance and metal uptake are two essential characteristics required for phytoextraction of metals from contaminated soils. We compared tolerance and Cu uptake of Elsholtzia splendens (reported previously to be a Cu hyperaccumulator) with Silene vulgaris (the Imsbach population, a well-known Cu-tolerant excluder species), using 30 soils varying widely in total Cu concentration (19-8645 mg kg(-1)). We further investigated the effectiveness of different soil testing methods for predicting plant metal uptake. The results showed that both Elsholtzia splendens and Silene vulgaris were tolerant to Cu, especially Silene vulgaris. However, Elsholtzia splendens did not hyperaccumulate Cu, but behaved as a typical Cu excluder like Silene vulgaris. The concentrations of Cu in both plants correlated more closely with 1 M NH4NO3 extractable Cu, soil solution Cu, or effective Cu concentration determined using DGT, than with soil total Cu, EDTA extractable Cu or free Cu2+ activity. The relationships between soil solution properties and root Cu concentrations were further investigated using multiple regression. The results showed that increasing soil solution pH increased root Cu concentration when free Cu2+ activity was held constant, suggesting a higher phytoavailability of free Cu2+ at a higher pH. Soil solution DOC appeared to play two contrasting roles on the phytoavailability of Cu: (1) reducing Cu availability by complexing Cu; and (2) increasing Cu availability at the same level of free Cu2+ activity by providing a strong buffer for free Cu2+. The results are consistent with the intensity/capacity concept for phytoavailability of metals in soils.     

Leaching of heavy metals from contaminated soils using EDTA

Ethylenediaminetetraacetic acid (EDTA) extraction of Zn, Cd, Cu and Pb from four contaminated soils was studied using batch and column leaching experiments. In the batch experiment, the heavy metals extracted were virtually all as 1:1 metal-EDTA complexes. The ratios of Zn, Cd, Cu and Pb of the extracted were similar to those in the soils, suggesting that EDTA extracted the four heavy metals with similar efficiency. In contrast, different elution patterns were obtained for Zn, Cd, Cu and Pb in the column leaching experiment using 0.01 M EDTA. Cu was either the most mobile or among the most mobile of the four heavy metals, and its peak concentration corresponded with the arrival of full strength EDTA in the leachate. The mobility of Zn and Cd was usually slightly lower than that of Cu. Pb was the least mobile, and its elution increased after the peaks of Cu and Zn. Sequential fractionations of leached and un-leached soils showed that heavy metals in various operationally defined fractions contributed to the removal by EDTA. Considerable mobilisation of Fe occurred in two of the four soils during EDTA leaching. Decreases in the Fe and Mn oxide fraction of heavy metals after EDTA leaching occurred in both soils, as well as in a third soil that showed little Fe mobilisation. The results suggest that the lability of metals in soil, the kinetics of metal desorption/dissolution and the mode of EDTA addition were the main factors controlling the behaviour of metal leaching with EDTA.     

Community metabolism of adenylates by microheterotrophs from the Los Angeles Harbor and Southern California coastal waters

The natural concentration (S _n) of dissolved total adenylates TA(=AMP+ADP+ATP) in coastal seawater from a depth of 1 m at 5 stations (California, USA) sampled periodically for 1 yr had a mean value ±1 SD of 2.8±1.7 nmol TA1^-1. The specific uptake rates of TA by microheterotrophs at a station inside the Los Angeles Harbor and at a station 1.5 km offshore in the San Pedro Channel were studied by simple uptake and saturation-type kinetic analysis using ³H-AMP as a tracer. Within the harbor, the specific uptake rate (nmol TA 10⁹ cell^-1 h^-1) at S _n ranged 10-fold from 0.028 in December to 0.28 in August. K _t (half-saturation constant) values always exceeded theS _n concentrations in any given month, and were greater in the harbor than in the channel. Generally, over 80% of biological uptake of ³H-AMP was associated with organisms <1.0 m, a size class accounting for about 20% of the total particulate adenylate concentration in the 0.2 to 203 m size fraction. Assuming steady-state conditions for the dissolved adenylate pool, we propose a model in which losses from this pool are balanced by inputs to the pool through inefficient feeding, lysis and decomposition of particulate adenylates.     

Waste minimisation in practice

One of the major hindrances to waste minimisation on a construction site is the difficulty in establishing a methodology and using this methodology to benchmark future construction projects. This paper introduces SMARTWaste, a software tool that has been used to audit, reduce and target waste arisings on a construction site. This tool tries to link the construction process and the waste hierarchy. That is reducing waste on a construction site rather than landfilling it. Three applications of the SMARTWaste software will be discussed using case studies from three different types of construction. An evaluation of these case studies shows that, by implementing a waste minimisation scheme on-site, you can improve material recovery for reuse. Also, by using the waste arisings as a benchmark you can reduce your waste arisings on future sites. Application of SMARTWaste or a similar waste minimisation tool on a wider basis could reduce waste arisings and could result in a built environment that consumed less natural resources and energy, and also produced less pollution and waste. Such a built environment would be environmentally and socially more responsive and responsible.