Fog as a Fresh-Water Resource: Overview and Perspectives

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m⁻² of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.     

Multi-year hourly PM2.5 carbon measurements in New York: Diurnal,day of week and seasonal patterns

Multi-year hourly measurements of PM_2.5 elemental carbon (EC) and organic carbon (OC) from a site in the South Bronx, New York were used to examine diurnal, day of week and seasonal patterns. The hourly carbon measurements also provided temporally resolved information on sporadic EC spikes observed predominantly in winter. Furthermore, hourly EC and OC data were used to provide information on secondary organic aerosol formation. Average monthly EC concentrations ranged from 0.5 to 1.4 μg m^?3 with peak hourly values of several μg m^?3 typically observed from November to March. Mean EC concentrations were lower on weekends (approximately 27% lower on Saturday and 38% lower on Sunday) than on weekdays (Monday to Friday). The weekday/weekend difference was more pronounced during summer months and less noticeable during winter. Throughout the year EC exhibited a similar diurnal pattern to NO_x showing a pronounced peak during the morning commute period (7–10 AM EST). These patterns suggest that EC was impacted by local mobile emissions and in addition by emissions from space heating sources during winter months. Although EC was highly correlated with black carbon (BC) there was a pronounced seasonal BC/EC gradient with summer BC concentrations approximately a factor of 2 higher than EC. Average monthly OC concentrations ranged from 1.0 to 4.1 μg m^?3 with maximum hourly concentrations of 7–11 μg m^?3 predominantly in summer or winter months. OC concentrations generally correlated with PM_2.5 total mass and aerosol sulfate and with NO_x during winter months. OC showed no particular day of week pattern. The OC diurnal pattern was typically different than EC except in winter when OC tracked EC and NO_x indicating local primary emissions contributed significantly to OC during winter at the urban location. On average secondary organic aerosol was estimated to account for 40–50% of OC during winter and up to 63–73% during summer months.     

TRLFS characterization of Eu(III)-doped synthetic organo-hectorite

Europium(III) was coprecipitated with the clay mineral hectorite, a magnesian smectite, following a multi-step synthesis procedure. Different Eu(III) species associated with the proceeding synthetic hectorite were characterized by selectively exciting the 5D0-->7F0 transition at low temperature (T < 20 K). Fluorescence decay times indicated that Eu(III) ions may be incorporated in the octahedral layer of the brucite precursor as well as in the octahedral sheet of the clay mineral. The excitation spectra indicated that the substitution of the divalent Mg by the trivalent Eu induced local structural deformation. This investigation implements the molecular-level understanding of the f element structural incorporation into the octahedral layer of sheet silicates by coprecipitation with clay minerals from salt solutions at 100 degrees C.     

Plant uptake of trace elements on a Swiss military shooting range: uptake pathways and land management implications

Over 400tons of Pb enters Swiss soils annually at some 2000 military shooting ranges (MSRs). We measured elements in the leaves of 10 plant species and associated rhizospheric soil on the stop butt of a disused MSR. The geometric mean concentrations of Pb, Sb, Cu, Ni in rhizospheric soils were 10,171mg/kg, 5067mg/kg, 4125mg/kg and 917mg/kg. Some species contained Pb, Cu and Ni, above concentrations (30mg/kg, 25mg/kg and 50mg/kg) shown to be toxic to livestock. Most contaminants in leaves resulted from surface deposition. However, at soil Pb concentrations >60,000mg/kg, Equisetum arvense and Tussilago farfara took up >1000mg/kg Pb into the leaves. These plants are not hyperaccumulators, having <100mg/kg Pb in leaves at lower soil concentrations. Removal of soil with more than 30,000 Pb, from which one could smelt this metal to offset remediation costs, followed by revegetation, would minimise dust and hence leaf-borne contaminants.     

Heavy metals in seaducks and mussels from misty fjords national monument in Southeast Alaska

Quartz Hill, in Misty Fjords National Monument near Ketchikan, Alaska, is the site of a proposed molybdenum-producing mine. To provide baseline data for use in post-development comparisons, we analyzed tissues of Barrow's goldeneyes (Bucephala islandica), common mergansers (Mergus merganser), and blue mussels (Mytilus edulis) for seven heavy metals that could potentially be released into the environment as a result of mining operations. Specimens were collected in 1980, 1981, and 1982 from two fjords likely to be used for discharge of tailings from the proposed mine and from two control fjords. Concentrations of arsenic, cadmium, copper, chromium, molybdenum, lead, and zinc were measured in soft tissues of mussels and in kidney, liver, and muscle of birds. The highest mean concentrations of metals found in bird tissues were 55.7 ppm dry weight cadmium in kidneys and 154 ppm dry weight zinc in livers of Barrow's goldeneyes. Concentrations of several metals in blue mussels differed among seasons and locations, but the most significant finding in mussels was a maximum mean cadmium concentration of 9.6 ppm dry weight, a level higher than normally found in undisturbed areas. With the exception of 104 ppm dry weight cadmium in the kidney of one common merganser and 12.7 ppm dry weight lead in the kidney of another, concentrations of other metals in seaduck and mussel tissues were low, consistent with what would be expected for a pre-development environment. Molybdenum was found in low concentrations (<10 ppm dry weight) in all avian kidney samples and most liver samples, but was not detected in blue mussels.THE U.S. GOVERNMENT RIGHT TO RETAIN A NON-EXCLUSIVE, ROYALTY FREE LICENCE IN AND TO ANY COPYRIGHT IS ACKNOWLEDGED.     

Ein Indikator für den Einsatz gefährlicher Stoffe in Produkten und Prozessen: Monoethylenglykol-Äquivalente

In order to quantify hazardous substance use in production processes, a special methodology has been designed within the context of the EcoGrade integrated environmental assessment method developed by the Öko-Institut, Institute for Applied Ecology. This methodology uses monoethylene glycol (MEG) equivalents as an indicator value for hazardous substance use. MEG equivalents permit direct, noxious-substance-focussed comparison of processes and products (Bunke 2001). The assessment is based upon the standardized risk phrases assigned to the component substances. The MEG equivalent methodology is a refinement and application of the potency factor model (Wirkfaktorenmodell) of the German Technical Rule for Hazardous Substances (Technische Regel für Gefahrstoffe, TRGS) 440 (AGS 2001). The data required for the assessment procedure are available within companies (safety data sheets) or are readily accessible publicly (hazardous substance databanks). A further benefit is that inventory analysis of hazardous substances using the method presented here makes it possible to take hazardous substance use into account in a systematic manner within life-cycle assessment (LCA) studies. The methodology has been tested for the example of residential buildings. Note: The terms ‘hazardous substance’, ‘noxious substance’ and ‘hazardous constituent’ are used in this paper in the sense of substances that have one of the hazard attributes set out in Article 3 of the German Chemicals Act (Chemikaliengesetz).     

来自印度Adayar河的重金属:渗透进入相邻的地下水含水层

引言 Adayar河是一条很短的河流(40km长),向西南方向流去,流经Chennai(北纬13°05',东经80°15'),从这里蜿蜒曲折大约13km后汇入孟加拉湾(图1).在河口地带它变得很宽,河口宽达2km.汇水面积约有800km2,其中大多数地方地势平坦,有岩层的露头.     

Legacies,socio-economic and biophysical processes and drivers: the case of future forest cover expansion in the Polish Carpathians and Swiss Alps

Mountain forest areas are key for providing a wide range of ecosystem services and are hot spots for land use change processes, in particular, increase in forest cover at the expense of mountain pastures and meadows. Mountain forest systems in eastern and western Europe have likely similar future socio-economic situations but significantly different socio-economic history. Using a scenario-based land use modelling approach (Dyna-CLUE framework) we model three scenarios (trend, liberalisation and self-sufficiency) of future land use in the Polish Carpathians and the Swiss Alps, focussing on forest cover change. We find that forest cover increase can be expected to continue in European mountainous regions under all likely scenarios, limited only by relatively strict policy interventions. Biophysical factors, rather than socio-economic ones, are key for defining the suitability for, and therefore likely locations of future forest cover, but land use legacy plays a very important role in the spatial patterns of future forest cover, particularly in eastern Europe.

     

Identifying Change-Points in Biological Sequences via Sequential Importance Sampling

The genomes of complex organisms, including the human genome, are highly structured. This structure takes the form of segmental patterns of variation in various properties and may be caused by the division of genomes into regions of distinct function, by the contingent evolutionary processes that gave rise to genomes, or by a combination of both. Whatever the cause, identifying the change-points between segments is potentially important, as a means of discovering the functional components of a genome, understanding the evolutionary processes involved, and fully describing genomic architecture. One property of genomes that is known to display a segmental pattern of variation is GC content. The GC content of a portion of DNA is the proportion of GC pairs that it contains. Sharp changes in GC content can be observed in human and other genomes. Such change-points may be the boundaries of functional elements or may play a structural role. We model genome sequences as a multiple change-point process, that is, a process in which sequential data are separated into segments by an unknown number of change-points, with each segment supposed to have been generated by a different process. We consider a Sequential Importance Sampling approach to change-point modeling using Monte Carlo simulation to find estimates of change-points as well as parameters of the process on each segment. Numerical experiments illustrate the effectiveness of the approach. We obtain estimates for the locations of change-points in artificially generated sequences and compare the accuracy of these estimates to those obtained via Markov chain Monte Carlo and a well-known method, IsoFinder. We also provide examples with real data sets to illustrate the usefulness of this method.