Three common metal contaminants of urban runoff (Zn, Cu & Pb) accumulate in freshwater biofilm and modify embedded bacterial communities

We investigated the absorption rates of zinc, copper and lead in freshwater biofilm and assessed whether biofilm bacterial populations are affected by exposure to environmentally relevant concentrations of these metals in flow chamber microcosms. Metals were rapidly accumulated by the biofilm and then retained for at least 14 days after transfer to uncontaminated water. Changes in bacterial populations were assessed by Automated Ribosomal Intergenic Spacer Analysis (ARISA) and 16S rRNA gene clone libraries. Significant differences in bacterial community structure occurred within only three days of exposure to metals and remained detectable at least 14 days after transfer to uncontaminated water. The rapid uptake of stormwater-associated metals and their retention in the biofilm highlight the potential role of biofilms in the transfer of metals to organisms at higher trophic levels. The sensitivity of stream biofilm bacterial populations to metal exposure supports their use as an indicator of stream ecological health.     

Parental care and sexual size dimorphism in wasps and bees

Sexual size dimorphism, in which one sex is larger than the other, occurs when body size has differential effects on the fitness of males and females. Mammals and birds usually have male-biased size dimorphism, probably because of strong sexual competition among males. Invertebrates usually have female-biased size dimorphism, perhaps because their inflexible exoskeletons limit ovary size, leading to a strong correlation between female body size and fecundity. In this paper, we test whether an additional factor, the type of parental care provided, affects the degree of sexual size dimorphism. Among wasps and bees, there is a contrast between provisioning taxa, in which females must gather and transport heavy loads of provisions to nests they have constructed, and non-provisioning taxa, in which females lay eggs but do not construct nests or transport provisions. Males have no role in parental care in either case. An analysis of British wasps and bees shows that provisioning taxa have significantly more female-biased size dimorphism than non-provisioning taxa. This is true for simple cross‑species comparisons and after controlling for phylogeny. Our data imply that the demands of carrying provision loads are at least part of the explanation for this pattern. Thus, sexual size dimorphism is greatest in pompilid wasps, which carry the heaviest prey items. Bees, which transport minute pollen grains, exhibit the least dimorphism. We also find that cavity‑nesting species, in which nest construction costs may be minimized, exhibit reduced dimorphism, but this was not significant after controlling for phylogeny.     

Prenatal diagnosis of CLCN4-related neurodevelopmental disorder in fetuses with congenital brain anomalies

We report two male fetuses born to a healthy unrelated couple, with agenesis of the corpus callosum identified on detailed 20-week ultrasound scans and confirmed by in-utero MRI. Whole-genome sequencing identified a likely pathogenic missense variant in the CLCN4 gene, establishing this as the causative gene in the family. Pathogenic variants in the CLCN4 gene cause a neurodevelopmental disorder (also called Raynaud-Claes syndrome) inherited in an X-linked pattern. The disorder is characterised by developmental delay, intellectual disability, autism spectrum disorder, epilepsy, mental health conditions, and significant feeding difficulties, predominantly, but not exclusively, affecting males. This is the first report of a prenatal phenotype associated with variants in the CLCN4 gene. The diagnosis of the CLCN4-related neurodevelopmental disorder in this family allowed accurate genetic counseling and discussion of reproductive choices. This leaves uncertainty about the possibility of a postnatal neurodevelopmental phenotype in heterozygous females, which we discuss.     

Development of a waterjet system for direct delivery of granular iron and activated carbon to remediate contaminated aqueous sediments

While the techniques and technologies associated with contaminated sediment remediation are relatively mature, there are several issues associated with these practices that make them unattractive. The inability of currently used mechanical mixing implements to place amendments in aqueous environments and their intrusive behavior toward benthic communities are just two examples of a necessity for an improved delivery method. Waterjets may be a viable option for placement of particulate remediation amendments, such as activated carbon and granular iron, at depth. A custom waterjet nozzle and injection system has been fabricated by the authors to examine this delivery concept. The developed injection system's performance was tested by characterizing the waterjet‐delivered amendment (activated carbon and granular iron) distributions in a surrogate sediment. The delivered amendment distributions followed similar patterns for a range of injection times and a variety of amendments. The injection depths, however, were dependent upon the type of amendment being injected. These findings have led to a better understanding of what occurs during an amendment injection, which can be used for a more controlled placement of remediation amendments using this technique in the future. The laboratory results indicate that the subject waterjet system may have the potential for field‐scale applications, especially for granular iron delivery, as the authors were able to place between 60 and 70 wt percent into a surrogate sediment bed along the path of injection. © 2011 Wiley Periodicals, Inc.     

Metallic and organic contaminants in sediments of Sydney Harbour, Australia and vicinity-- a chemical dataset for evaluating sediment quality guidelines

An internally consistent dataset comprising 103 surficial estuarine sediment samples were collected from Sydney Harbour, Australia and locations south of Sydney. This paper describes the chemical characteristics of the dataset and evaluates its suitability for use in evaluating biological effects-based sediment quality guidelines (SQGs). The sediments contained mixtures of chemicals, the most prevalent chemical classes being metals and polycyclic aromatic hydrocarbons, whereas sediments from coastal lakes/estuaries south of Sydney had low concentrations of contaminants. Maximum concentrations of the prevalent contaminants zinc, lead, copper and pyrene were 11,300, 1,420, 1,060 mg kg(-1) and 23,300 microg kg(-1), respectively. For the majority of samples, concentrations of individual chemicals exceeded most effects-based SQGs that have been adopted for use in Australia, implying occasional or frequent adverse biological effects are expected. Comparing mixtures of contaminants to ranges in numbers of SQGs exceeded and mean SQG quotients showed that most samples (57% to 68%) had contamination characteristics associated with moderate probabilities (30% to 52%) of acute toxicity, based on North American data. A smaller proportion of samples (15% to 17%) had contamination characteristics associated with high probabilities (74% to 85%) of toxicity. The wide range of chemicals and concentrations, associated with low, medium and high probabilities of toxicity, indicated that the dataset was suitable for future use in evaluating predictive abilities of SQGs. This is relevant, given the recent introduction of North American-derived SQGs for Australia.     

Antimicrobial potential of the ionophore monensin on freshwater biofilm bacteria

Microorganisms play key roles in stream ecosystems, but comparatively little is known about the resilience of freshwater bacterial communities and their susceptibility to the chemical by-products of agricultural land use. Antibiotics used in the agricultural sector are of particular concern and have been detected in waterways associated with agricultural land. Despite widespread agricultural intensification globally and the sector's high antibiotic use, the effects of agricultural antibiotic by-products on stream microbial communities have yet to be characterised. We investigated the impacts of the antibiotic monensin on microbial biofilm communities in a simulated contamination event using streamside-replicated channels. A 24-h pulse experiment in flow channels precolonised by stream biofilm microbial communities contrasted the effects of monensin concentrations ranging from realistic to extreme toxicity levels (1–550 ug L^?1). Biofilm community composition was characterised immediately before and after the pulse for several weeks using automated ribosomal intergenic spacer analysis. Despite applying acutely toxic levels of monensin, only limited effects to biofilm community composition were detected immediately after antibiotic application, and these disappeared within 4 days. Rather, temporal factors drove biofilm differences, highlighting the overriding importance of wider, catchment-level, physiochemical hydrological influences on structuring freshwater biofilm communities, as opposed to localised and sporadic agricultural surface runoff contamination events containing antibiotics.     

Harnessing the bonanza: economic liberalization and capacity building in the mineral sector

Over the past decade many developing and transition economies have liberalized their investment regimes for mining and privatized formerly state-owned mineral assets. In response, these economies have witnessed increased foreign investment in exploration and development, growth in the number and diversity of mineral projects, and the opening up of new channels for harnessing increased economic and social benefits from development in the minerals sector. The restructuring of fiscal and regulatory regimes to encourage foreign investment, and the associated influx of mining capital, technology and skills, is transforming traditional relationships between mining firms, local communities and the government. This transformation necessitates a re-evaluation of the most effective policy approaches to capture increased economic and social benefits from mineral production. This article considers effective mechanisms for improving the capacity of developing and transition countries to maximize the economic and social benefits of mineral production. Common challenges associated with minerals economies are reviewed. Consideration is given to the opportunities for harnessing foreign direct investment and the possibilities for creating new partnerships between local communities, industry, government, and multilateral development agencies through social investment projects. The article concludes with a series of recommendations for the design and implementation of policy approaches towards harnessing mineral production for economic and social benefit following the liberalization of investment regimes for mining.     

A Simple Framework for Incorporating Seasonal Streamflow Forecasts into Existing Water Resource Management Practices1

Gong, Gavin, Lucien Wang, Laura Condon, Alastair Shearman, and Upmanu Lall, 2010. A Simple Framework for Incorporating Seasonal Streamflow Forecasts Into Existing Water Resource Management Practices. Journal of the American Water Resources Association (JAWRA) 46(3):574-585. DOI: 10.1111/j.1752-1688.2010.00435.x Abstract: Climate-based streamflow forecasting, coupled with an adaptive reservoir operation policy, can potentially improve decisions by water suppliers and watershed stakeholders. However, water suppliers are often wary of straying too far from their current management practices, and prefer forecasts that can be incorporated into existing system modeling tools. This paper presents a simple framework for utilizing streamflow forecasts that works within an existing management structure. Climate predictors are used to develop seasonal inflow forecasts. These are used to specify operating rules that connect to the probability of future (end of season) reservoir states, rather than to the current storage, as is done now. By considering both current storage and anticipated inflow, the likelihood of meeting management goals can be improved. The upper Delaware River Basin in the northeastern United States is used to demonstrate the basic idea. Physically plausible climate-based forecasts of March-April reservoir inflow are developed. Existing simulation tools and rule curves for the system are used to convert the inflow forecasts to reservoir level forecasts. Operating policies are revised during the forecast period to release less water during forecasts of low reservoir level. Hindcast simulations demonstrate reductions of 1.6% in the number of drought emergency days, which is a key performance measure. Forecasts with different levels of skill are examined to explore their utility.     

How has a shortage of census and geological information impeded the regularization of artisanal and small‐scale mining?

There is growing consensus that a combination of laissez‐faire policies, ad hoc regulation and debilitating support services has perpetuated socio‐economic and environmental deterioration in the artisanal and small‐scale mining (ASM) industry. However, a lack of anthropological and geological information on ASM prevents many governments both from improving the policy environment of the industry, and from providing more robust extension services to its operators. This article aims to examine more precisely how a deficiency of baseline census and geological data has inhibited industry formalization and undermined many of the measures implemented to address pressing problems at ASM sites. Specifically, it is argued that insufficient knowledge of artisanal mining populations — including their demographic structure — and of areas suitable for ASM activities affects the ability of a government to regularize, as well as to improve, the organization of this largely informal sector of industry. Case studies of Ghana and Zimbabwe are used to illustrate how the undertaking of low‐budget projects in areas of geological prospecting and population analysis could improve the efficiency of ASM assistance.