Removal of nickel from neutral mine drainage using peat-calcite,compost, and wood ash in column reactors

Environmental Science and Pollution Research - The effectiveness of compost, peat-calcite, and wood ash to remove Ni from a circum-neutral-contaminated mine water was tested in continuous flow...     

Revised environmental Kuznets Curve in CEE countries. Evidence from panel threshold models for economic sectors

Environmental Science and Pollution Research - The recent environmental debates in the European Green Deal to reduce pollution determine the reconsideration of the relationship between economic...     

Towards eliminating systematic errors caused by the experimental conditions in Biochemical Methane Potential (BMP) tests

The Biochemical Methane Potential (BMP) test is increasingly recognised as a tool for selecting and pricing biomass material for production of biogas. However, the results for the same substrate often differ between laboratories and much work to standardise such tests is still needed. In the current study, the effects from four environmental factors (i.e. ambient temperature and pressure, water vapour content and initial gas composition of the reactor headspace) on the degradation kinetics and the determined methane potential were evaluated with a 2⁴ full factorial design. Four substrates, with different biodegradation profiles, were investigated and the ambient temperature was found to be the most significant contributor to errors in the methane potential. Concerning the kinetics of the process, the environmental factors’ impact on the calculated rate constants was negligible. The impact of the environmental factors on the kinetic parameters and methane potential from performing a BMP test at different geographical locations around the world was simulated by adjusting the data according to the ambient temperature and pressure of some chosen model sites. The largest effect on the methane potential was registered from tests performed at high altitudes due to a low ambient pressure. The results from this study illustrate the importance of considering the environmental factors’ influence on volumetric gas measurement in BMP tests. This is essential to achieve trustworthy and standardised results that can be used by researchers and end users from all over the world.     

Precipitation scavenging coefficient: influence of measured aerosol and raindrop size distributions

Precipitation scavenging coefficients, widely used in pollution studies, are derived from microphysical parameterisations of aerosol particles and raindrop populations and parameterisations of their interactions. The present study investigates the effects of measured aerosol and raindrop size distributions in a microphysical polydisperse framework. The interactions between aerosol and raindrops parameterised as collision efficiency are explicitly included to account for Brownian diffusion, inertial impaction and interception. Estimated values of the polydisperse scavenging coefficients exhibit variations of orders of magnitude depending on the aerosol type and almost no variation with the raindrop size distributions. For practical use, linear relationships between the scavenging coefficients and rain intensity for different aerosol types are derived.     

Properties of agricultural aerosol released during wheat harvest threshing, plowing and sowing

This study shows for the first time a chemical and morphological characterization of agricultural aerosols released during three important agricultural operations： threshing, plowing and sowing. The field campaigns were carried out in the eastern part of the Po Valley, Italy, in summer and autumn 2009. The aerosol particles were sampled on quartz fiber filters and polytetrafluoroethylene membranes in order to allow Inductively Coupled Plasma Mass Spectrometry （ICP-MS） analysis and Scanning Electron Microscopy equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDS） investigations, respectively. The organic carbon mass concentrations were measured with a Sunset Laboratory Dual-Optical Organic Carbone/Elemental Carbon （OCEC） Aerosol analyzer. The morphological and chemical analyses by SEM-EDS allowed recognizing four main particle classes： organic, silica, calcite and clay minerals. The organic particles contribute to both fine and coarse aerosol fractions up to ca. 50% for all three agricultural activities. This was also confirmed by OCEC analysis for fine fraction. Most of the agricultural aerosols, about 60%, were single particles and the remaining 40% were agglomerations of particles. The ICP-MS results showed that threshing and plowing produce more aerosol particles than sowing, which was characterized by important amounts of clay minerals produced from land soils.     

Physiological cellular responses and adaptations of Rhodococcus erythropolis IBBPo1 to toxic organic solvents

A new Gram-positive bacterium, Rhodococcus erythropolis IBBPo1（KF059972.1） was isolated from a crude oil-contaminated soil sample by enrichment culture method. R. erythropolis IBBPo1 was able to tolerate a wide range of toxic compounds, such as antibiotics（800–1000 μg/mL）,synthetic surfactants（50–200 μg/mL）, and organic solvents（40%–100%）. R. erythropolis IBBPo1 showed good tolerance to both alkanes（cyclohexane, n-hexane, n-decane） and aromatics（toluene, styrene, ethylbenzene） with logPOW（logarithm of the partition coefficient of the solvent in octanol–water mixture） values between 2.64 and 5.98. However, alkanes were less toxic for R. erythropolis IBBPo1 cells, compared with aromatics. The high organic solvent tolerance of R. erythropolis IBBPo1 could be due to the presence in their large genome of some catabolic（alkB, alkB1, todC1, todM, xylM）, transporter（HAE1） and trehalose-6-phosphate synthase（otsA1, KF059973.1） genes. Numerous and complex physiological cellular responses and adaptations involved in organic solvent tolerance were revealed in R. erythropolis IBBPo1 cells exposed 1 and 24 hr to 1% organic solvents. R. erythropolis IBBPo1 cells adapt to 1% organic solvents by changing surface hydrophobicity, morphology and their metabolic fingerprinting.Considerable modifications in otsA1 gene sequence were also observed in cells exposed to organic solvents（except ethylbenzene）.     

Comparative effectiveness of mixed organic substrates to mushroom compost for treatment of mine drainage in passive bioreactors

Bioreactors are one possible best sustainable technology to address the mine-impacted water problems. Several prospective substrates (mushroom compost, cow manure, sawdust, wood chips, and cut rice straw) were characterized for their ability to serve as a source of food and energy for sulfate-reducing bacteria. Twenty bench-scale batch bioreactors were then designed and set up to investigate relative effectiveness of various mixtures of substrates to that of mushroom compost, the most commonly used substrate in field bioreactors, for treating mine drainage with acidic (pH 3) and moderate pH (pH 6). Overall, reactive mixtures showed satisfactory performances in generating alkalinity, reducing sulfate and removing metals (Al>Fe>Mn) (up to 100%) at both pH conditions, for all substrates. The mixture of sawdust and cow manure was found as the most effective whereas the mixture containing 40% cut rice straw gave limited efficiency, suggesting organic carbon released from this substrate is not readily available for biodegradation under anaerobic conditions. The mushroom compost-based bioreactors released significant amount of sulfate, which may raise a more concern upon the start-up of field-scale bioreactors. The correlation between the extent of sulfate reduction and dissolved organic carbon/SO(4)(2-) ratio was weak and this indicates that the type of dissolved organic carbon plays a more important role in sulfate reduction than the absolute concentration and that the ratio is not sensitive enough to properly describe the relative effectiveness of substrate mixtures.