The use of agricultural substrates to improve methane yield in anaerobic co-digestion with pig slurry: Effect of substrate type and inclusion level

Anaerobic co-digestion of pig slurry with four agricultural substrates (tomato, pepper, persimmon and peach) was investigated. Each agricultural substrate was tested in co-digestion with pig slurry at four inclusion levels: 0%, 15%, 30% and 50%. Inclusion levels consisted in the replacement of the volatile solids (VS) from the pig slurry with the VS from the agricultural substrate. The effect of substrate type and inclusion level on the biochemical methane potential (BMP) was evaluated in a batch assay performed at 35 °C for 100 days. Agricultural substrate’s chemical composition was also analyzed and related with BMP. Additionally, Bacteria and Archaea domains together with the four main methanogenic archaeal orders were quantified using quantitative real-time TaqMan polymerase chain reaction (qPCR) at the end of the experiment to determine the influence of agricultural substrate on sludge’s microbial composition. Results showed that vegetable substrates (pepper and tomato) had higher lipid and protein content and lower carbohydrates than fruit substrates (persimmon and peach). Among substrates, vegetable substrates showed higher BMP than fruit substrates. Higher BMP values were obtained with increasing addition of agricultural substrate. The replacement of 50% of VS from pig slurry by tomato and pepper increased BMP in 41% and 44%, respectively compared with pig slurry only. Lower increments in BMP were achieved with lower inclusion levels. Results from qPCR showed that total bacteria and total archaea gene concentrations were similar in all combinations tested. Methanomicrobiales gene concentrations dominated over the rest of individual archaeal orders.     

Heavy metal concentrations in litteral sediments from the Beagle Channel,Tierra del Fuego,Argentina

For the first time the concentration of trace metals (Fe, Pb, Cu, Zn, Cd and total Hg) of sediments from the coastal zone of the Beagle Channel (Tierra del Fuego, in Southern Argentina) were measured. Atomic absorption spectrophotometry was utilized in order to determine the metal contents. The level of metals as observed in the sediments was recognized as the natural background, even though the use of normalization of lead, copper, and zinc to iron allowed the identification of the main sources of metal pollution for this environment. In order to develop future environmental monitoring programmes for the area of Ushuaia city and the Beagle Channel, the present results need to be considered.     

Environmental performance evaluation of agro-industrial innovations – part 1: Ambitec-Life Cycle,a methodological approach for considering life cycle thinking

As sustainability considerations increasingly dominate the technology development debate worldwide, practical approaches to assess environmental performance of innovations have been warranted. The present study (Part 1) introduces Ambitec-Life Cycle, a method derived from Ambitec-Agro for considering life cycle thinking in the environmental performance evaluation (EPE) of agro-industrial innovations. An agro-industrial innovation case study related to residue recycling is presented, revealing steps in the product life cycle where opportunities are best for technological improvements. In Part 2 (this issue) of this study, a methodological approach for considering the environmental vulnerability of watersheds and to integrate this analysis in EPE methods is presented. This approach is applied to Ambitec-Life Cycle and to the same residue case study, allowing the identification of performance indicators with greater potential to cause impacts at the studied watersheds.     

Toxic and essential elements in blood from delivering women in selected areas of São Paulo State, Brazil

This study was designed to evaluate the degree of environmental contamination and possible exposure of pregnant women to toxic elements in seven selected areas of S?o Paulo State, Brazil. The overall median concentration of Mo in maternal blood was 0.53 μg L?1, highly significant differences found between sites (p < 0.0001). Cd was found to be low overall - 0.09 μg L?1 (0.01-0.58 μg L?1) - with mothers from the Coastal and Rural 1 sites having the highest levels (p < 0.016).Median Hg concentration was 0.60 μg L?1 (0.06 μg L?1-4.35 μg L?1); median Pb level was 16.2 μg L?1 (3.5-57.7 μg L?1) and no differences between sites were observed for both metals. Median Mn level was 16.7 μg L?1 (7.0-39.7 μg L?1), being highest in Urban 2 site (p < 0.016). Concentrations of maternal Co were found to range between 0.06 μg L?1 and 1.1 μg L?1 (median 0.25 μg L?1) and As level was 0.60 μg L?1 (0.10-3.8 μg L?1) overall, with no statistical significance between sites for Co and As. Median Se concentrations were found to be 64 μg L?1 (36-233 μg L?1), with the highest median levels found in Urban 3 site; site differences were statistically significant (p < 0.0001). Correlation for each element (between paired maternal and cord blood) was measured only in Rural site 1; significant correlation was shown for Hg, Pb, Mn and Co (p < 0.05). These findings may be interpreted as indicating low environmental contamination in S?o Paulo State, Brazil. These findings could also indicate that pregnant women have little or no contact with pollutants, possibly due to awareness campaigns carried out by public health practitioners.     

Ability of O-anisate degrading microorganisms to come tabolize dicamba and other related herbicides

O-anisate degrading microorganisms were isolated from soil samples and identified. 80, 24, 64 and 64% of the isolates showed cometabolism to the herbicides dicamba, 2, 3, 6-TBA, 2, 4-D and MCPA, respectively.     

Estimating the Relative Efficiency of Brazilian Publicly and Privately Owned Water Utilities: A Stochastic Cost Frontier Approach1

Abstract: This paper assesses cost efficiencies of Brazilian public and private companies of water supply. To measure the efficiency, we used a stochastic frontier model derived from the translog family – a specification similar to a Cobb‐Douglas including a quadratic term in log output. The model parameters are estimated by maximum likelihood using Brazilian data for the year 2002. Statistical inference leads to the conclusion that there is no evidence that private firms and public firms are significantly different in terms of efficiency measurements.     

Reduction of NO by CO using Pd-CeTb and Pd-CeZr catalysts supported on SiO2 and La2O3-Al2O3

The catalytic activity of Pd catalysts supported on Ce_0.73Tb_0.27O_x/SiO₂, Ce_0.6Zr_0.4O_x/SiO₂, Ce_0.73Tb_0.27O_x/La₂O₃-Al₂O₃ and Ce_0.6Zr_0.4O_x/La₂O₃-Al₂O₃ was studied using the reduction of NO by CO. The catalysts were characterized by X-ray fluorescence, surface area, X-ray diffraction, temperature-programmed reduction, CO chemisorption and oxygen storage capacity. Temperature-programmed reduction results indicated that Tb or Zr incorporation improves the reducibility and oxygen storage capacity. CO chemisorption data suggested the presence of large PdO particles due to the low CO/Pd ratio. No significant differences were obtained in light off temperatures (T_{Light off}) for all Pd catalysts and the most active was 1.5%Pd/Ce_0.6Zr_0.4O_x/SiO₂.     

Solid-phase extraction followed by liquid chromatography-time-of-flight-mass spectrometry to evaluate pharmaceuticals in effluents. A pilot monitoring study

The present work provides a multi-residue analytical method for determining a selection of 20 pharmaceuticals from diverse therapeutical classes in hospital effluent wastewater. The method is based on the simultaneous extraction of the target compounds by solid phase extraction (SPE), followed by liquid chromatography-time-of-flight-mass spectrometry (LC-TOF-MS) analysis. Using TOF-MS, accurate mass measurements within 2 ppm error were obtained for most of the pharmaceuticals studied. Empirical formula information can be obtained by this method, allowing the unequivocal identification of the target compounds in the samples. Validation studies showed that LC-TOF-MS analysis is a valuable new tool for identification and quantification of pharmaceuticals in wastewater. Recoveries, using Oasis HLB cartridges at pH 7, were higher than 75% for all pharmaceuticals, except for ranitidine, 4-methylaminoantipyrine (4-MAA), cefotaxime and omeprazole, which needed specific pH conditions for their extraction. Linearity of response over two orders of magnitude was demonstrated (r > 0.99). Matrix effects resulting in suppression of the response were observed. For most of the compounds ion suppression was less than 39%, except for metronidazole, carbamazepine 10,11-epoxide, naproxen and erythromycin, where the signal suppression was 42%, 59%, 46% and 95%, respectively. A simple and effective approach to minimize or avoid matrix interferences was the 1 : 4 dilution of the SPE extracts. Method detection limits (MDLs) and quantification limits (MQLs) ranged between 4-115 ng l(-1) and 14-384 ng l(-1), respectively. The precision of the method, calculated as relative standard deviation (RSD), ranged from 1.1-19.8% and 1.7-21.7% for intra- and inter-day, respectively. The developed analytical method was applied to the analysis of hospital effluent wastewater during a survey study. 18 of the 20 pharmaceuticals studied were detected at concentration levels of microg l(-1), reaching in some cases concentrations over 100 microg l(-1), and in the case of the analgesic and antipyretic dipyrone metabolite, higher than 1000 microg l(-1).     

Anaerobic digestion of microalgal biomass after ultrasound pretreatment

High rate algal ponds are an economic and sustainable alternative for wastewater treatment, where microalgae and bacteria grow in symbiosis removing organic matter and nutrients. Microalgal biomass produced in these systems can be valorised through anaerobic digestion. However, microalgae anaerobic biodegradability is limited by the complex cell wall structure and therefore a pretreatment step may be required to improve the methane yield. In this study, ultrasound pretreatment at a range of applied specific energy (16–67 MJ/kg TS) was investigated prior to microalgae anaerobic digestion. Experiments showed how organic matter solubilisation (16–100%), hydrolysis rate (25–56%) and methane yield (6–33%) were improved as the pretreatment intensity increased. Mathematical modelling revealed that ultrasonication had a higher effect on the methane yield than on the hydrolysis rate. A preliminary energy assessment indicated that the methane yield increase was not high enough as to compensate the electricity requirement of ultrasonication without biomass dewatering (8% VS).     

Feasibility of rice straw as a raw material for the production of soda cellulose pulp

The main objective of this work is to evaluate the suitability of rice straw and soda–anthraquinone (soda–AQ) pulping process to produce pulp and paper. To reach this aim, it was used a central composite factorial design to study the influence of operational variables (temperature (155–185 °C), cooking time (30–90 min), soda concentration (10–20%), anthraquinone concentration (0–1%) and liquid/solid ratio (6–8)), in soda–anthraquinone cooking of rice straw on pulps and paper sheets properties obtained.Based on the yield values obtained, nearly one half of the raw material can be efficiently converted into cellulose pulp and paper sheets. Also, the Kappa number/viscosity ratio of the pulp facilitates its efficient bleaching. Finally, based on the values for above-described physical properties, the pulp can be used to obtain paper or board and recycled paper (as % virgin fibre).In Spain are produced annually 757,000 t of rice straw. If we considered an average yield process of 45%, it would be possible to obtain 340,000 tons of pulp. These tons would be absorbed by the market taking into account the necessities in cellulosic pulp consumption.