Iron and organo-bentonite for the reduction and sorption of trichloroethylene

Hybrid barriers using dechlorination and immobilization were studied to remove trichloroethylene (TCE) in this study. Hybrid barriers of iron filings and organo (hexadecyltrimethylammonium, HDTMA)-bentonite were simulated in columns to assess the performance of the hybrid barriers. TCE reduction rate for the mixture of zero valent iron (ZVI) and HDTMA-bentonite was approximately seven times higher than that for ZVI, suggesting the reduction of TCE was accelerated when HDTMA-bentonite was mixed with ZVI. For the column of two separate layers of iron and HDTMA-bentonite, TCE reduction rate was nearly similar to that for ZVI alone, but the partition coefficient (Kd) was 4.5 times higher than that for ZVI only. TCE was immobilized in the first layer with HDTMA-bentonite due to sorption, and then dechlorinated in the second layer with iron filings due to reduction. The HDTMA-bentonite and minimally-desorbed HDTMA from the organo-bentonite are believed to contribute the increase in TCE concentration on iron surface so that more TCE could be available for reduction. Therefore, the incorporation of HDTMA-bentonite into ZVI not only can effectively retard the transport of chlorinated organic contaminants from landfill leachate or oil shock in subsurface environment, also can expedite the reduction rate of TCE.     

Mobilization of arsenic in groundwater of Bangladesh: evidence from an incubation study

The extensive extraction of arsenic (As)-contaminated groundwaters for drinking, household and agricultural purposes represents a serious health concern in many districts of Bangladesh. This laboratory-based incubation study investigated the sources and mechanisms of As mobilization in these groundwaters. Several incubation studies were carried out using sediments collected from the Bangladesh aquifer that were supplemented, or not, with different nutrients, followed by an analysis of the sediment suspensions for pH, ORP (oxidation-reduction potential), EC (electrical conductivity) and As and Fe(ΙΙ) concentrations. In the substrate-amended sediment suspensions incubated under anaerobic environment, there was a mobilization of As (maximum: 50–67 μg/l) and Fe(ΙΙ) (maximum: 182 μg/l), while the ORP value decreased immediately and drastically (as much as −468 mV to −560 mV) within 5–6 days. In the sediment suspensions incubated under control and aerobic conditions, no significant As mobilization occurred. The simultaneous mobilization of As and Fe(ΙΙ) from sediments is a strong indication that their mobilization resulted from the reduction of Fe oxyhydroxide by the enhanced activity of indigenous bacteria present in the sediments; this phenomenon also provides insights on the mobilization mechanism of As in groundwater. The concentrations of As in the sediments used in the incubation studies were strongly linked to the gradients of redox potential development that was stimulated by the quantity of organic nutrient (glucose) used. The penetration of surface-derived organic matter into the shallow aquifer may stimulate the activity of microbial communities, thereby leading to a reduction of iron oxyhydroxide and As release.     

Distribution characteristics of polychlorinated biphenyls in crucian carp (Carassius auratus) from major rivers in Korea

Polychlorinated biphenyls (PCBs) levels in crucian carp were determined at 20 locations along four major river systems, several small-scale rivers and a wetland in Korea. Twenty-eight congeners, ranging from tri- to hepta-CBs were detected. A gas chromatograph with a mass selective detector was used to quantify the individual PCB congeners. The objectives of this study were to investigate the levels of contamination of PCBs in freshwater fish and to observe the pattern of their distribution. The sampling locations were chosen among 31 sampling sites that are currently used as environmental residue checkpoints by the Korean Ministry of Environment. Concentrations of individual congeners ranged from not detectable (n.d.) to 0.75 ng g(-1) on a wet weight basis. The total concentrations of PCBs at each site ranged from n.d. to 5.41 ng g(-1) of wet weight. The most heavily contaminated site was the Nakdong estuary located near the Shinpyung-Janglim factory district. The PCB 153 and 138 were the principal congeners and penta- and hexa-chlorinated biphenyls comprised the main congener groups.     

Optimizing the specific surface area of fly ash-based sorbents for flue gas desulfurization

High performance sorbents for flue gas desulfurization can be synthesized by hydration of coal fly ash, calcium sulfate, and calcium oxide. In general, higher desulfurization activity correlates with higher sorbent surface area. Consequently, a major aim in sorbent synthesis is to maximize the sorbent surface area by optimizing the hydration conditions. This work presents an integrated modeling and optimization approach to sorbent synthesis based on statistical experimental design and two artificial intelligence techniques: neural network and genetic algorithm. In the first step of the approach, the main and interactive effects of three hydration variables on sorbent surface area were evaluated using a full factorial design. The hydration variables of interest to this study were hydration time, amount of coal fly ash, and amount of calcium sulfate and the levels investigated were 4-32 h, 5-15 g, and 0-12 g, respectively. In the second step, a neural network was used to model the relationship between the three hydration variables and the sorbent surface area. A genetic algorithm was used in the last step to optimize the input space of the resulting neural network model. According to this integrated modeling and optimization approach, an optimum sorbent surface area of 62.2m(2)g(-1) could be obtained by mixing 13.1g of coal fly ash and 5.5 g of calcium sulfate in a hydration process containing 100ml of water and 5 g of calcium oxide for a fixed hydration time of 10 h.     

Recovery of phosphates from wastewater using converter slag: Kinetics analysis of a completely mixed phosphorus crystallization process

A phosphorus crystallization process for recovering phosphates was developed using a completely mixed reactor and powdered converter slag as a seed crystal. This completely mixed phosphorus crystallization process achieved a stable and high phosphorus recovery: the average PO4-P removal efficiency during 200 d of operation was 87%, with a range of 70-98%. The apparent volume of the slag doubled due to crystal growth during the long-term phosphorus-removal experiments. The Ca2+ concentration, slag dosage, and temperature were found to govern the phosphorus recovery system for a given condition of pH and hydraulic retention time. The equations for the rate constant and reaction order were obtained by evaluating the model parameters. The model developed in this study was observed to successfully simulate the behavior of effluent PO4-P in a completely mixed phosphorus crystallization reactor over a wide variety of operating conditions of temperature, Ca2+ concentration, and influent PO4-P. Model investigations of design factors suggest that the completely mixed phosphorus crystallization process with influent PO4-P concentrations of less than 10 mg l(-1) could ensure effluent PO4-P concentrations of less than 0.5 and 1.0 mg l(-1) during summer and winter in Korea, respectively.     

Isolation and physiological characterization of the pentachlorophenol degrading bacterium Sphingomonas chlorophenolica

Many chlorophenols tend to persist in the environment, and they may become public health hazards. Among chlorophenols, pentachlorophenol (PCP) is a priority pollutant that has been used widely as a general biocide in commercial wood treatment. Owing to the rapid industrial growth, serious soil and water pollutions by chlorophenols has been reported in Taiwan. In this study, 10 indigenous PCP-degrading bacterial strains were isolated from a PCP-degrading mixed culture, and the potential of both the pure and mixed cultures for PCP degradation compared. Moreover, the physiological characteristics and optimum growth conditions of the PCP-degrading bacteria were investigated. One of the isolated bacterial strains with good potential for PCP degradation was characterized and identified as Sphingomonas chlorophenolica by 16S rDNA gene analysis. The result of the optimum growth temperatures revealed that this organism was a mesophile. The optimum pH for PCP removal by S. chlorophenolica was between 6.9 and 7.6. Increase in concentration of PCP has a negative effect on the biodegradation potential of S. chlorophenolica and PCP concentration above 600 mg l(-1) was inhibitory to its growth. The results of this study indicate that this S. chlorophenolica strain has a better potential for PCP degradation compared to the enriched mixed culture. The physiological characterization of the isolates also indicates the possible application of this strain for bioremediation of sites contaminated with PCP.     

Accumulation of chromium (VI) from aqueous solutions using water lilies (Nymphaea spontanea)

This study describes an investigation using tropical water lilies (Nymphaea spontanea) to remove hexavalent chromium from aqueous solutions and electroplating waste. The results show that water lilies are capable of accumulating substantial amount of Cr(VI), up to 2.119 mg g(-1) from a 10 mg l(-1) solution. The roots of the plant accumulated the highest amount of Cr(VI) followed by leaves and petioles, indicating that roots play an important role in the bioremediation process. The maturity of the plant exerts a great effect on the removal and accumulation of Cr(VI). Plants of 9 weeks old accumulated the most Cr(VI) followed by those of 6 and 3 weeks old. The results also show that removal of Cr(VI) by water lilies is more efficient when the metal is present singly than in the presence of Cu(II) or in waste solution. This may be largely associated with more pronounced phytotoxicity effect on the biochemical changes in the plants and saturation of binding sites. Significant toxicity effect on the plant was evident as shown in the reduction of chlorophyll, protein and sugar contents in plants exposed to Cr(VI) in this investigation.     

Removal of Cr(VI) and humic acid by using TiO2 photocatalysis

The removal efficiencies of Cr(VI) and HA, using a TiO(2)-mediated photocatalytic process, were investigated with variations in the pH, TiO(2) dosage and Cr(VI)/HA ratio. During the photocatalytic reaction, the total removal of Cr(VI) occurred through adsorption onto TiO(2), as well as its reduction to Cr(III). However, oxidation and adsorption were identified as important removal processes for the treatment of HA. Due to the anionic type adsorption onto TiO(2) and its acid-catalyzed photocatalytic reduction, the removal of Cr(VI) decreased with increasing pH, while that of HA increased with increasing pH. The TiO(2) dosage was also an important parameter for the removal of Cr(VI). As the TiO(2) dosage was increased to 2.5 g l(-1), the removal of Cr(VI) was continuously enhanced, but decreased at dosages above 3 g l(-1) due to the increased blockage of the incident UV light used for the photocatalytic reaction. The removal of Cr(VI) was greatly enhanced when the system contained both HA and Cr(VI) compared to Cr(VI) alone. Also, the removal of HA was greatly enhanced when the system contained both HA and Cr(VI) compared to HA alone. The removal of Cr(VI) was continuously enhanced as the HA concentration gradually increased; however, no further increase was observed above 20 mg l(-1) HA due to the increased absorption of the UV light. This result supports that the photocatalytic reaction, with illuminated TiO(2), could be applied to more effectively treat wastewater containing both Cr(VI) and HA than that containing a single species only.     

Analysis of regional and temporal characteristics of PM10 during an Asian dust episode in Korea

This study analyzes the regional and temporal distributions of PM10 concentrations observed in major metropolitan cities in Korea before, during and after a recent Asian dust episode in 2002. There were spatial and temporal variations in PM10 concentrations among the mid-western, the southwestern, the southeastern, and the southern parts of Korea during this Asian dust period due to the different air mass movement time and the different wind directions and speeds of prevailing winds in each city or region. The origins of the three-day Asian dust episode were identified by an analysis of two-day backward isentropic air trajectories. The different origins for each day also significantly contributed to the spatial and temporal variations in PM10 concentrations. A significant relationship was found between PM10 concentrations on the day preceding the first peak day and the first peak day of the Asian dust period but only in the mid-western areas. The concentrations of PM10 just after the Asian dust episode were much higher than those just before. There was a significant increase in a coarse fraction, having soil origins, of particles during the Asian dust episode. Concentrations of Mn, Fe, Ni and Cr extracted from the total suspended particulate (TSP) samples collected in 7 cities during the Asian dust episode were much higher when compared with other days in 2001. However, the Asian dust did not consistently increase the concentrations of lead, cadmium and copper as they are influenced by local sources such as local traffic or industrial emissions.     

High average daily intake of PCDD/Fs and serum levels in residents living near a deserted factory producing pentachlorophenol (PCP) in Taiwan: influence of contaminated fish consumption

An abandoned pentachlorophenol plant and nearby area in southern Taiwan was heavily contaminated by dioxins, impurities formed in the PCP production process. The investigation showed that the average serum PCDD/Fs of residents living nearby area (62.5 pg WHO-TEQ/g lipid) was higher than those living in the non-polluted area (22.5 and 18.2 pg WHO-TEQ/g lipid) (P<0.05). In biota samples, average PCDD/F of milkfish in sea reservoir (28.3 pg WHO-TEQ/g) was higher than those in the nearby fish farm (0.15 pg WHO-TEQ/g), and Tilapia and shrimp showed the similar trend. The average daily PCDD/Fs intake of 38% participants was higher than 4 pg WHO-TEQ/kg/day suggested by the world health organization. Serum PCDD/F was positively associated with average daily intake (ADI) after adjustment for age, sex, BMI, and smoking status. In addition, a prospective cohort study is suggested to determine the long-term health effects on the people living near factory.