DRASTIC framework improvement using Stepwise Weight Assessment Ratio Analysis (SWARA) and combination of Genetic Algorithm and Entropy

Environmental Science and Pollution Research - Hybrid and integrated techniques can be used to investigate intrinsic uncertainties of the overlay and index groundwater vulnerability assessment...     

Performance of activated carbon coated graphite bipolar electrodes on capacitive deionization method for salinity reduction

• Graphite bipolar electrodes act as an appropriate bed for the CDI process. • Activated carbon Coating improves the application of the electrodes. • CDI is an environmentally friendly method to apply for brackish water. • Initial concentration is the most important parameter in the CDI method. • CDI process in a batch-mode setup needs more development. This research investigates a capacitive deionization method for salinity reduction in a batch reactor as a new approach for desalination. Reductions of cost and energy compared with conventional desalination methods are the significant advantages of this approach. In this research, experiments were performed with a pair of graphite bipolar electrodes that were coated with a one-gram activated carbon solution. After completing preliminary tests, the impacts of four parameters on electrical conductivity reduction, including (1) the initial concentration of feed solution, (2) the duration of the tests, (3) the applied voltage, and (4) the pH of the solution, were examined. The results show that the maximum efficiency of electrical conductivity reduction in this laboratory-scale reactor is about 55%. Furthermore, the effects of the initial concentration of feed solution are more significant than the other parameters. Thus, using the capacitive deionization method for water desalination with low and moderate salt concentrations (i.e., brackish water) is proposed as an affordable method. Compared with conventional desalination methods, capacitive deionization is not only more efficient but also potentially more environmentally friendly.     

Analyzing material flow in Alborz industrial estate,Ghazvin, Iran

Journal of Material Cycles and Waste Management - Industrial ecology and models such as material flow analysis make operational approaches in order to reuse produced waste as primary resources in...     

Accumulation and elimination of cadmium and lead in juvenile milkfish during sublethal exposure

Pollution of aquatic environments by trace metals is a worldwide environmental problem. Metal pollutants are increasingly being released into the environment as a result of industrialization. In this study, the bioaccumulation of cadmium and lead in young juvenile milkfish liver (Chanos chanos) was investigated after exposure to three sublethal concentration of each pollutants (1/20, 1/10, and 1/5 LC₅₀ of 96-h LC₅₀) for acute time 12, 24, and 96 h and subchronically for 7, 14, and 21 days. Cadmium and lead accumulation in liver increased with the exposure period and concentrations of pollutant. Compared to controls, the uptake of cadmium is much higher than that of lead. Accumulation factors showed an increase with exposure time and for lead an inverse relationship between accumulation factor and exposure concentration. The elimination of the two pollutants during the 30 days depuration was investigated after 30 days depuration time. During this phase, cadmium and lead concentrations decreased.     

Experimental study of rubber tire aggregates effect on compressive and dynamic load-bearing properties of cylindrical concrete specimens

Sustainable development has become a major focus for engineers and planners as part of their collective efforts in finding, developing and integrating environmental-friendly solutions for material recycling and waste management into design and construction of civil engineering infrastructure. In the past three decades, there has been an increase in recycling and application of waste materials into the concrete to decrease costs and improve material properties of the concrete. Significant growth in automobile manufacturing industry and increased rubber tire supply for vehicles suggested the application of waste tire particles as concrete aggregates to minimize the ecological footprint of the rubber tire waste due to its recycling process difficulties. In this paper, the effect of rubber tire particles on compressive and dynamic strength of concrete specimens with different particle percentiles was tested on more than 55 cylindrical specimens. To achieve the optimal mix design properties of rubber tire concrete specimens, both fine and coarse aggregates got replaced by fine and coarse rubber particles. Introduction of rubber tire particles as coarse and fine aggregate reduces the brittleness of the concrete and provides more flexible aggregate bonding which ultimately improves the dynamic resistance of the concrete. It increases the concrete workability and provides environmental-friendly and cost-effective solutions in using recycled materials for concrete construction applications.     

Green synthesis of 1,3-dihydrobenzimidazol-2-ones from aromatic diamines by microwave in a tetrabutylammonium bromide–ethanol molten salt paste

Environmental Chemistry Letters - The replacement of hazardous solvents by greener alternatives is a major goal in green chemistry. Benzimidazol-2-ones are heterocycles exhibiting a wide range of...     

Cellulose Schiff Base as a Bio-based Polymer Ligand: Extraction,Modification and Metal Adsorption Study

Journal of Polymers and the Environment - Cellulose was initially extracted from Safflower (Carthamus tinctorius L.) stem wastes and used for the preparation of a fully bio-based adsorbent polymer...     

Fish and shrimp waste management at household and market in Bushehr,Iran

Journal of Material Cycles and Waste Management - The aim of this study was to investigate the estimation and management of fish and shrimp wastes in Bushehr province. Two-part questionnaire...     

Sustainable rangeland management using a multi-fuzzy model: how to deal with heterogeneous experts' knowledge

While fuzzy specialists commonly use homogeneous experts' knowledge to construct fuzzy models, it is much more difficult to deal with knowledge elicited from a heterogeneous group of experts. This issue is exemplified in the area of sustainable rangeland management (SRM). One way to deal with the diversity of opinions is to develop a fuzzy system for all experts and to combine all these, the so-called primary systems, into one multi-fuzzy model. To derive each of the primary fuzzy systems, several semi-structured interviews were held in three different areas of the Fars province in Southwest Iran using the knowledge of a group of administrative experts. To obtain the final output of the multi-fuzzy model, we applied different 'voting' methods. The first method simply uses the arithmetic average of the primary outputs as the final output of the multi-fuzzy model. This final output represents an estimation of the right rate of stocking (RRS). We also propose other (un)supervised voting methods. Most importantly, by harmonising the primary outputs such that outliers get less emphasis, we introduce an unsupervised voting method for calculating a weighted estimate of the RRS. This harmonising method is expected to provide a new useful tool for policymakers dealing with heterogenity in experts' opinions: it is especially useful where limited field data are available and one is forced to rely on experts' knowledge only. By constructing the three fuzzy models based on the elicitation of heterogeneous experts' knowledge, our study shows the multidimensional vaguenesses that exist in SRM. Finally, by comparing the final RRS with its common values, this study strongly points to the existence of overgrazing in pastures in the three regions of the Fars province in Southwest Iran.     

Exploring an integrated spatially model for land-use scenarios simulation in a metropolitan region

Environment, Development and Sustainability - Spatial simulation of land-use change scenarios in metropolitan areas is essential for analyzing both the causes and consequences of various future...