Enhanced Desorption of Atmospheric Samples from Activated Carbon

It has been previously shown that the desorption of either a chemisorbed or a physically adsorbed gas can be enhanced by the subsequent introduction of a foreign gas. Under conditions in which desorption recovery of butane from activated, carbon was 50 to 65%, subsequent adsorption of CCl₄ enhanced the recovery of butane to 100%. Recovery of CCl₂F₂, originally 79%, was enhanced to 99% by the same method. The method of enhanced desorption was applied to the recovery of samples from activated carbons exposed to atmospheres in Chicago, New Orleans, Philadelphia, Washington, D. C, and Cincinnati. Three different types of carbons, characterized by different distributions of pore diameters, were used simultaneously in the Cincinnati sampling. In general, the enhanced desorption technique was advantageous in providing analytical information on adsorbed samples recovered from carbon media. The enhancement effect is especially marked with hydrocarbon material. The effects of these structural attributes of the carbon media are evaluated by detailed consideration of infrared absorptions.     

Low Emissions from Controlled Combustion for Automotive Rankine Cycle Engines

Rankine cycle engines have a high potential for meeting the emission levels established by the 1970 amendment to the Federal Clean Air Act for the 1975-76 automobile. This paper discusses a Solar research and development program sponsored by EPA/APCO which demonstrates a full scale 2 million Btu per hour working model of a Rankine cycle engine combustor and controls which can surpass the emission goals established.

Special features of the combustor are the unique methods of precisely controlling both the fuel and air to provide optimum flame performance at any engine power level. This paper discusses the special requirements of the Rankine cycle engine and shows why the very wide range of fuel flow required necessitates use. of special techniques in fuel atomization, fuel and air control, and aerodynamics. Sufficient discussion is included to show the design methods that are necessary, in general, to achieve low emissions in continuous flow combustion systems. Emphasis is placed on the importance of interfacing a combustion system with other engine parts if a successful low emission, wide turndown ratio combustor working model is to be achieved. Sufficient discussion on combustion kinetics is included to advise on approaches necessary to minimize NO formation in external combustion systems while maintaining high efficiency and low CO and unburned hydrocarbons.     

Determination of Microgram Quantities of Inorganic Sulfate in Atmospheric Particulates

Abstract

Before a community-wide woodstove changeout program, a chemical mass balance (CMB) source apportionment study was conducted in Libby, MT, during the winter of 2003–2004 to identify the sources of fine particulate matter (PM_2.5) within the valley. Results from this study showed that residential woodstoves were the major source, contributing approximately 80% of the ambient PM_2.5 throughout the winter months. In an effort to lower the ambient PM_2.5, a large woodstove changeout program was conducted in Libby from 2005 to 2007 in which nearly 1200 old woodstoves were changed out with cleaner burning models. During the winter of 2007–2008, a follow-up CMB source apportionment study was conducted to evaluate the effectiveness of the changeout. Results from this study showed that average winter PM_2.5 mass was reduced by 20%, and woodsmoke-related PM_2.5 (as identified by the CMB model) was reduced by 28% when compared with the pre-changeout winter of 2003– 2004. These results suggest that a woodstove changeout can be an effective tool in reducing ambient levels of PM_2.5 in woodstove-impacted communities.     

Assessment of the Commercial Potential for the High Intensity Ionizer in the Electric Utility Industry

The high intensity ionizer (HII) has reached a level of development where projections can be made of its potential for enhancing electrostatic precipitator (ESP) performance within the electric utility industry. Future ESP performance requirements are forecast based on a scenario of possible changes in regulations for mass emissions, fine particulate, and opacity. An assessment is made of the alternative means of upgrading ESP performance over the next 15 years. It is concluded that of 570 ESP estimated to require upgrading by 1995 to meet possibly more stringent regulations, approximately 20%—or 117 units—may employ HII.     

Burning Chemical Wastes as Fuels in Cement Kilns

Hazardous wastes in the environment represent one of our most serious problems. Ever increasing quantities of toxic wastes have contaminated our land, air, and water. Lack of adequate hazardous waste disposal facilities is a critical problem. Landfilling toxic wastes is no longer considered safe. The tragedy of the Love Canal has demonstrated the need for proper hazardous waste disposal facilities. The best organic chemical waste disposal method is process incineration. Cement kilns have been used for burning toxic chemical industrial wastes in Canada, Michigan, New York, Sweden, etc. Existing cement kilns, when properly operated, can destroy most organic chemical wastes. Even the most complex chlorinated hydrocarbons, including PCB can be completely destroyed during normal cement kiln operations, with minimal emissions to the environment. Burning toxic chemical wastes in cement kilns, and other mineral industries, is mutually beneficial to both industry, who generates such wastes, and to society and government, who want to dispose properly of such wastes in a safe, environmentally acceptable manner. The added benefit of energy conservation is important, since large quantities of valuable fuel can be saved in the manufacture of cement when such techniques are employed.     

A same-sex stepparent shortens a prebreeder's duration on the natal territory: tests of two hypotheses in Florida scrub-jays

Prebreeders of the Florida scrub-jay (Aphelocoma coerulescens) are less likely to be found on their natal territories with a same-sex stepparent than with parents or an opposite-sex stepparent. We tested two models that had been proposed to account for this sexual asymmetry. The dominance hypothesis states that stepparents perceive same-sex prebreeders as competitors, primarily for a mate, so behave aggressively toward them. The pair-formation hypothesis states that prebreeders remain home to pair eventually with the opposite-sex stepparent. Predictions from these two models were tested by analyses from a quarter-century of records on a study population at Archbold Biological Station and by new behavioral field observations at the Station. Results clearly rejected the latter and strongly supported the former hypothesis. No prediction from the pair-formation hypothesis was confirmed: no pairing by a prebreeder of either sex has ever occurred with a stepparent; remaining home was equally frequent in age-one males with stepmothers and genetic mothers, and in females with stepfathers and genetic fathers; and the same results were found in age-two prebreeders. By contrast, the data strongly supported the dominance hypothesis. Field data showed higher aggression rates by stepfathers to male prebreeders and stepmothers to female prebreeders than by parents to their same-sex genetic offspring. Fewer age-one males remained home with a stepfather than with the genetic father, and the same was found for age-one females with a stepmother and genetic mother; at age two, the effect occurred only in female prebreeders. The two hypotheses make different predictions about prebreeders with two stepparents versus with both parents, thus providing a critical test. The dominance hypothesis correctly predicted decreased duration at home by age-one males and females; data for age-two females were in the direction of predicted difference but not significant; and, as in other tests, no effect was found for age-two males. We propose that age-two male prebreeders remain home despite elevated aggression from stepfathers because these prebreeders retain the possibility of budding from or inheriting the natal territory. Received: 16 July 1997 / Accepted after revision: 26 June 1998     

The effects of 3,3′,4,4′-tetrabromobiphenyl on rats fed diets containing a constant level of copper and varying levels of molybdenum

Copper (Cu) metabolism is altered in rats fed diets high in molybdenum (Mo) and low in Cu. This 10-week study was carried out to examine the effects of supplemental Mo (7.5–240 μg/g diet) on male Sprague–Dawley rats fed diets adequate in Cu (5 μg/g diet) and to determine the susceptibility of Mo-treated animals to the environmental pollutant 3,3′,4,4′-tetrabromobiphenyl (TBB). After 7 weeks of dietary treatment, half of the rats in each group received a single IP injection of TBB (150 μM/kg bw), while the other half received the corn oil vehicle. Rats sacrificed at 10 weeks showed no effects of Mo on growth, feed efficiency, or selected organ or tissue weights. Dose-dependent effects on plasma Mo (0–5.1 μg/mL), plasma Cu (0.95–0.20 μg/mL), and bone Cu (3.4–10 μg/g) in control through the high dose were found. Cu sequestration in the bone of Mo-treated rats is a new finding. TBB treatment resulted in dramatic weight loss and loss of absolute organ mass. Relative organ weights were increased, except for the thymus. TBB altered the concentrations of certain amino acids. Compared to control rats, this polybrominated biphenyl congener significantly decreased plasma Cu and ceruloplasmin at higher concentrations of dietary Mo and promoted the process of plasma Cu decrease by Mo, suggesting a combined effect.     

Vehicle routing for the eco-efficient collection of household plastic waste

Plastic waste is a special category of municipal solid waste. Plastic waste collection is featured with various alternatives of collection methods (curbside/drop-off) and separation methods (source-/post-separation). In the Netherlands, the collection routes of plastic waste are the same as those of other waste, although plastic is different than other waste in terms of volume to weight ratio. This paper aims for redesigning the collection routes and compares the collection options of plastic waste using eco-efficiency as performance indicator. Eco-efficiency concerns the trade-off between environmental impacts, social issues and costs. The collection problem is modeled as a vehicle routing problem. A tabu search heuristic is used to improve the routes. Collection alternatives are compared by a scenario study approach. Real distances between locations are calculated with MapPoint. The scenario study is conducted based on real case data of the Dutch municipality Wageningen. Scenarios are designed according to the collection alternatives with different assumptions in collection method, vehicle type, collection frequency and collection points, etc. Results show that the current collection routes can be improved in terms of eco-efficiency performance by using our method. The source-separation drop-off collection scenario has the best performance for plastic collection assuming householders take the waste to the drop-off points in a sustainable manner. The model also shows to be an efficient decision support tool to investigate the impacts of future changes such as alternative vehicle type and different response rates.     

Occupational exposure to formaldehyde in an institute of morphology in Brazil: a comparison of area and personal sampling

Background, aims, and scope

Formaldehyde (FA) is a harmful chemical, which is classified as carcinogenic to humans (Group 1) by the International Agency for Research on Cancer. Solutions of FA that are used to preserve cadavers in research and education morphological institutes represent a risk to occupational health of professionals and students. During the dissection of cadavers in the anatomy laboratories, FA vapors are emitted, resulting in the exposure of students and their instructors to elevated levels of FA. The World Health Organization recommends an air quality guideline value of 0.1 mg m^?3 for exposure to FA. The limit of occupational exposure adopted by the Brazilian legislation (2.3 mg m^?3) is markedly higher than those adopted by institutions of other countries around the world. The purpose of this study was to determine the levels of personal exposure and the area concentration of FA in the morphology department of the Federal Fluminense University, Brazil, and investigate and compare the relationship between them.

Methods

Four rooms distributed in the three floors of the Morphology Department were evaluated: the embalming laboratory, the anatomy laboratories, the corridor of the teachers?? rooms, and the entrance hall. Thirty-six samples in total were collected in the second semester of 2010 and first semester of 2011. The air sampling and FA analysis were performed according to the EPA TO-11A Protocol, using a diffusive sampling device for carbonyl compounds. Personal samples were collected from monitors using a sampling device pinned on each person??s lapel. The samples were analyzed using rapid resolution liquid chromatography with UV-DAD detection at 360 nm.

Results and discussion

The concentrations of FA ranged from 0.20 and 0.18 mg m^?3 in the corridor between the teachers?? rooms, 0.03 to 0.37 mg m^?3 in the entrance hall, 0.22 to 2.07 mg m^?3 in the anatomy laboratory, 2.21 to 2.52 mg m^?3, in the embalming room. The levels found in the corridor between the teachers?? rooms and in the entrance hall were lower than in other compartments because of their large distances to the sources of FA and better ventilation. The other rooms presented higher levels of FA because of the activities carried there (embalming and dissection procedures). Even in the rooms that showed the lowest levels of FA, the values found were higher than those established by all international guideline limits, except the Brazilian legislation limit, although, the concentration level in the embalming room was even greater than the Brazilian guideline. These concentrations are 100?C1,000-fold higher than those reported in an FA outdoor study. The exposure levels of monitors and students ranged from 1.89 to 4.82 mg m^?3, indicating that current practices at the Morphology Department at the university would represent a health risk. The simultaneous monitoring of area concentrations and personal exposure showed that the characteristics of classes and of cadavers?? parts, the number of students in the room and even the activities of the monitors influence the FA concentrations.

Conclusion

This study revealed that the concentration of FA was low in the ventilated areas of the Morphology Department, and that the personal exposure when the person was close to the cadavers during the dissection procedure was higher than the mean FA concentration. This should be considered in the risk assessment of FA during these activities without effective protection equipment. It is suggested that the Brazilian legislation of exposure to formaldehyde requires an urgent update considering international legislation.