The national biological impact assessment program∗

The need to safely field test genetically modified organisms is a critical step in the sequence of research leading to the commercialization of biotechnology in agriculture. To address this need the United States Department of Agriculture has established the National Biological Impact Assessment Program (NBIAP) to facilitate the safe field testing of genetically modified organisms. NBIAP fosters safe field testing of genetically modified organisms through a computerized network for information exchange, facilitation of biological monitoring techniques and by providing support for research in biosafety to develop new field testing methods and better predictive models.     

Fluorescence Verses Radioactivity Labeling for Lab-Scale Investigation of the Fate of Water-Soluble Polymers in Wastewater Treatment Plants

Water-soluble synthetic polymers are extensively used in cosmetics, detergents and paints. Many end up in wastewater and, later on, in wastewater-treatment plants. In order to gain an insight into their fate in such plants, fluorescence and radioactivity labelings were compared using a lab-scale reactor designed to mimic industrial conditions. Two fermentation media were considered, namely a mixture of E402 and E204 micro-organisms and an activated sludge collected from a water-treatment plant located in the south of France. A sample of low molar mass commercial poly(acrylic acid) (PAA) was labeled by radioactivity with tritium and by coupling the 6-aminofluorescein fluorescent dye. Labeled PAA-containing sludges were allowed to ferment. To monitor the fate of the polymers, aliquots of the fermented mixtures were withdrawn at selected times and centrifuged. Liquid and solid phases were analyzed by scintigraphy or UV spectrometry, depending of the labeling techniques. Both techniques led to similar distributions, c.a. 75% in the supernatant and 25% in the solid phase. Distributions remained constant during the biological tests. There was no degradation of the commercial PAA after aqueous size exclusion chromatography (SEC), in agreement with literature. These features showed that fluorescence-labeling can be used instead of the complex and expensive radiolabeling. The validated fluorescence-based method was then applied to a linear poly(acrylic acid) synthesized by ATRP and labeled with 6-aminofluorescein. There was no significant difference between the commercial and the linear poly(acrylic acid)s. In contrast, a linear PAA with 5% of tert-butyl ester repeating units was predominantly found in the solid phase although adsorption or absorption by micro-organisms could not be demonstrated. The method based on fluorescence labeling should be applicable to other water soluble polymers provided that the dye remains attached to the polymer as it was the case for the studied poly(acrylic acid)s.     

Public Reaction to Air Pollution in Nashville,Tennessee

Extensive air pollution studies have been completed in Nashville. One part of the study involved collection of opinions from nearly 8000 people. Opinions were solicited relative to awareness and concern about possible adverse effects of air pollution on health, property, materials, and aesthetics. Responses of the interviewed people are related to several types of pollutant measurements. The results indicate widespread concern about air pollution, and the degree of concern is, in general, closely related to the degree of air contamination experienced by interviewed people. Methodology is discussed, data are analyzed statistically, and conclusions are presented.     

Organizational and Operational Techniques for Relieving Manpower Shortages in Air Pollution Control Agencies

Many governmental air pollution control agencies are confronted with a shortage of manpower, both in terms of numbers of people and qualifications of available staff members. This paper discusses a number of techniques which may be used to relieve this manpower shortage. The techniques are discussed in terms of collaboration between state and local agencies; organizational structures which make maximum use of scarce categories of people; program policies which conserve the time of agency staff; operating schemes which save travel time and minimize skills required; and working tools that can be used to get the greatest production with available personnel.     

The combined effect of uranium and gamma radiation on biological responses and oxidative stress induced in Arabidopsis thaliana

Uranium never occurs as a single pollutant in the environment, but always in combination with other stressors such as ionizing radiation. As effects induced by multiple contaminants can differ markedly from the effects induced by the individual stressors, this multiple pollution context should not be neglected. In this study, effects on growth, nutrient uptake and oxidative stress induced by the single stressors uranium and gamma radiation are compared with the effects induced by the combination of both stressors. By doing this, we aim to better understand the effects induced by the combined stressors but also to get more insight in stressor-specific response mechanisms. Eighteen-day-old Arabidopsis thaliana seedlings were exposed for 3 days to 10 μM uranium and 3.5 Gy gamma radiation. Gamma radiation interfered with uranium uptake, resulting in decreased uranium concentrations in the roots, but with higher transport to the leaves. This resulted in a better root growth but increased leaf lipid peroxidation. For the other endpoints studied, effects under combined exposure were mostly determined by uranium presence and only limited influenced by gamma presence. Furthermore, an important role is suggested for CAT1/2/3 gene expression under uranium and mixed stressor conditions in the leaves.     

Geotechnical properties of fresh municipal solid waste at Orchard Hills Landfill, USA

This paper presents the results of a laboratory investigation to determine the geotechnical properties of fresh municipal solid waste (MSW) collected from the working phase of Orchard Hills Landfill located in Davis Junction (Illinois, USA). Laboratory testing was conducted on shredded MSW to determine the compaction, hydraulic conductivity, compressibility, and shear strength properties at in-situ gravimetric moisture content of 44%. In addition, the effect of increased moisture content during leachate recirculation on compressibility and shear strength of MSW was also investigated by testing samples with variable gravimetric moisture contents ranging from 44% to 100%. Based on Standard Proctor tests, a maximum dry density of 420 kg/m(3) was observed at 70% optimum moisture content. The hydraulic conductivity varied in a wide range of 10(-8)-10(-4)m/s and decreased with increase in dry density. Compression ratio values varied in a close range of 0.24-0.33 with no specific trend with the increase in moisture content. Based on direct shear tests, drained cohesion varied from 31 to 64 kPa and the drained friction angle ranged from 26 to 30 degrees. Neither cohesion nor friction angle demonstrated any correlation with the moisture content, within the range of moisture contents tested. The consolidated undrained triaxial shear tests on saturated MSW showed the total strength parameters (c and phi) to be 32 kPa and 12 degrees, and the effective strength parameters (c' and phi') to be 38 kPa and 16 degrees. The angle of friction (phi) decreased and cohesion (c) value increased with the increase in strain. The effective cohesion (c') increased with increase in strain; however, the effective angle of friction (phi') decreased first and then increased with the increase in strain. Such strain-dependent shear strength properties should be properly accounted in the stability analysis of bioreactor landfills.     

Geochemical behaviour of dissolved trace elements in a monsoon-dominated tropical river basin,Southwestern India

The study presents a 3-year time series data on dissolved trace elements and rare earth elements (REEs) in a monsoon-dominated river basin, the Nethravati River in tropical Southwestern India. The river basin lies on the metamorphic transition boundary which separates the Peninsular Gneiss and Southern Granulitic province belonging to Archean and Tertiary–Quaternary period (Western Dharwar Craton). The basin lithology is mainly composed of granite gneiss, charnockite and metasediment. This study highlights the importance of time series data for better estimation of metal fluxes and to understand the geochemical behaviour of metals in a river basin. The dissolved trace elements show seasonality in the river water metal concentrations forming two distinct groups of metals. First group is composed of heavy metals and minor elements that show higher concentrations during dry season and lesser concentrations during the monsoon season. Second group is composed of metals belonging to lanthanides and actinides with higher concentration in the monsoon and lower concentrations during the dry season. Although the metal concentration of both the groups appears to be controlled by the discharge, there are important biogeochemical processes affecting their concentration. This includes redox reactions (for Fe, Mn, As, Mo, Ba and Ce) and pH-mediated adsorption/desorption reactions (for Ni, Co, Cr, Cu and REEs). The abundance of Fe and Mn oxyhydroxides as a result of redox processes could be driving the geochemical redistribution of metals in the river water. There is a Ce anomaly (Ce/Ce*) at different time periods, both negative and positive, in case of dissolved phase, whereas there is positive anomaly in the particulate and bed sediments. The Ce anomaly correlates with the variations in the dissolved oxygen indicating the redistribution of Ce between particulate and dissolved phase under acidic to neutral pH and lower concentrations of dissolved organic carbon. Unlike other tropical and major world rivers, the effect of organic complexation on metal variability is negligible in the Nethravati River water.     

Multilingual education of students on a global scale and perspective—international networking on the example of bioindication and biomonitoring (B&B technologies)

Living or formerly living organisms are being used to obtain information on the quality of the general health status of our environment by bioindication and biomonitoring methods for many decades. Thus, different roads toward this common scientific goal were developed by a lot of different international research groups. Global cooperation in between various scientific teams throughout the world has produced common ideas, scientific definitions, and highly innovative results of this extremely attractive working field. The transdisciplinary approach of different and multifaceted scientific areas—starting from biology, analytical chemistry, via health physics, up to social and economic issues—have surpassed mental barriers of individual scientists, so that “production” of straightforward common results related to the influence of material and immaterial environmental factors to the well-being of organisms and human life has now reached the forefront of international thinking. For the further sustainable development of our common scientific “hobby” of bioindication and biomonitoring, highest personal energy has to be given by us, being teachers to our students and to convince strategically decision makers as politicians to invest (financially) into the development of education and research of this innovative technique. Young people have to be intensively convinced on the “meaning” of our scientific doing, e.g., by extended forms of education. One example of multilingual education of students on a global scale and perspective is given here, which we started about 3 years ago.     

Assessment of heavy metal and organic contaminants levels along the Libyan coast using transplanted mussels (Mytilus galloprovincialis)

Within the framework of the MYTIOR project in 2009, heavy metals and organic compounds contaminations were assessed in transplanted mussels in 16 different stations along the coasts of Libya. These stations were located at miles offshore industrial/urban sources but in open sea providing original results related to the background contamination rather than linked to a specific coastal source of pollutants. Results indicated mercury (Hg, 0.045–0.066 mg/kg dry weight (dw)), lead (Pb, 0.44–0, 71 mg/kg dw) and copper (Cu, 3.56–4.21 mg/kg dw) were in the same range or at lower value than control for all stations. Chromium (Cr) in Meleta (3.08 mg/kg dw) and Bomba (3.80 mg/kg dw) and Cadmium values in all stations (1.21–2.41 mg/kg dw) were above control. Meleta, stations from the gulf of Syrt and the three eastern stations were the most affected stations by nickel (max at 5.83 mg/kg dw in Syrt) when zinc was in the same range (141–197 mg/kg dw) and above the control (92 mg/kg dw) at all stations. Polycyclic aromatic hydrocarbon (PAH) levels were found in the range of 16.8–42.8 mg/kg (dry weight) indicating low levels along the Libyan coast with acenaphthene and benzo (a, b, k) pyrenes detected mainly in western Libya. The study of PAH ratios indicated a mixed petrogenic/pyrolytic origin. The only polychlorinated biphenyls (PCBs) found in Libya were PCB 101 in one location and PCB 153 in Tripoli, Garrapoli, Syrt, Ras Lanuf and Benghazi (1.2–1.9 μg/kg dw). Insecticides were lower than control in all stations except DDT, only detected in Misratah (3.5 μg/kg dw). Overall, the results indicated a low background contamination and a low pollution extent according to the environmental pressure occurring offshore the Libyan coast.