Characteristics and management of infectious industrial waste in Taiwan

Infectious industrial waste management in Taiwan is based on the specific waste production unit. In other countries, management is based simply on whether the producer may lead to infectious disease. Thus, Taiwan has a more detailed classification of infectious waste. The advantage of this classification is that it is easy to identify the sources, while the disadvantage lies in the fact that it is not flexible and hence increases cost. This study presents an overview of current management practices for handling infectious industrial waste in Taiwan, and addresses the current waste disposal methods. The number of small clinics in Taiwan increased from 18,183 to 18,877 between 2003 and 2005. Analysis of the data between 2003 and 2005 showed that the majority of medical waste was general industrial waste, which accounted for 76.9%-79.4% of total medical waste. Infectious industrial waste accounted for 19.3%-21.9% of total medical waste. After the SARS event in Taiwan, the amount of infectious waste reached 19,350 tons in 2004, an increase over the previous year of 4000 tons. Waste minimization was a common consideration for all types of waste treatment. In this study, we summarize the percentage of plastic waste in flammable infectious industrial waste generated by medical units, which, in Taiwan was about 30%. The EPA and Taiwan Department of Health have actively promoted different recycling and waste reduction measures. However, the wide adoption of disposable materials made recycling and waste reduction difficult for some hospitals. It has been suggested that enhancing the education of and promoting communication between medical units and recycling industries must be implemented to prevent recyclable waste from entering the incinerator.     

Physical and chemical properties of feedlot pen surfaces located on moderately coarse- and moderately fine-textured soils in southern Alberta

Southern Alberta has the highest density of feedlot cattle in Canada, and there is a concern that leaching of water and contaminants may be greater for feedlots located on coarser-textured than finer-textured soils. Our objective was to determine if infiltration and leaching were greater for a 4-yr-old feedlot located on a moderately coarse-textured (MC) soil compared with two feedlots located on moderately fine-textured (MF) soils (5- and 52-yr-old pens). Various soil physical properties of feedlot pen surfaces were measured, including field-saturated hydraulic conductivity (K(fs)) and near-saturated hydraulic conductivity at -0.9 and -3.9 cm water potential. Selected chemical properties of feedlot soil layers were measured, as well as the chloride content of the soil profile (0-100 cm). Mean K(fs), K(-0.9), and K(-3.9) values were not significantly (P > 0.10) greater at the MC site than the two MF sites, indicating no evidence of greater infiltration on coarser-textured soils. In addition, mean K(fs), K(-0.9), and K(-3.9) values of soils within feedlot pens at all three sites were significantly (P < or = 0.10) reduced by 46 to 78% compared with soil outside the pens. Depth of chloride accumulation was greatest at the 52-yr-old feedlot on MF soil (60-70 cm), followed by 4-yr-old feedlot on MC soil (40-50 cm) and 5-yr-old feedlot on MF soil (30-40 cm). Visual inspection determined that the black interface layer formed within 2 mo of cattle stocking at all three sites.     

Studying organic matter molecular assemblage within a whole organic soil by nuclear magnetic resonance

This work shows the applicability of two-dimensional (2D) (1)H-(13)C heteronuclear correlation (HETCOR) nuclear magnetic resonance (NMR) spectroscopy to the characterization of whole soils. A combination of different mixing times and cross polarization (CP) methods, namely Lee-Goldberg (LG)-CP and Ramp-CP are shown to afford, for the first time, intra- and inter- molecular connectivities, allowing for molecular assemblage information to be obtained on a whole soil. Our results show that, for the brackish marsh histosol under study, two isolated domains could be detected. The first domain consists of O-alkyl and aromatic moieties (lignocellulose material), while the second domain is comprised of alkyl type moieties (cuticular material). The role of these domains is discussed in terms of hydrophobic organic compound sorption within soil organic matter (SOM), including the possible effects of wetting and drying cycles.     

In-situ application of colloidal activated carbon for PFAS-contaminated soil and groundwater: A Swedish case study

Soil and groundwater contamination by per- and polyfluoroalkyl substances (PFAS) has been a significant concern to human health and environmental quality. Remediation of contaminated sites is crucial to prevent plume expansion but can prove challenging due to the persistent nature of PFAS combined with their high aqueous mobility. In this case study, we investigated the potential of colloidal activated carbon (CAC) for soil stabilization at the pilot scale, aiming to entrap PFAS and prevent their leaching from soil into groundwater. Monitoring of the site revealed the presence of two potential sources of PFAS contamination at concentrations up to 23 μg L⁻¹ for ∑₁₁PFAS in groundwater. After CAC application, initial results indicated a 76% reduction of ∑₁₁PFAS and high removal rates for long-chain PFAS, such as perfluorooctane sulfonic acid and perfluorooctanoic acid. A spike in concentrations was noticed 6 months after injection of CAC, showing a rebound of the plume and a reduction of treatment effectiveness. Based on long-term monitoring data, the treatment effectiveness for ∑₁₁PFAS dropped to 52%. The rebound of concentrations was attributed to the plume bypass of the barrier due to the presence of high conductivity zones, which likely occurred because of seasonal changes in groundwater flow directions or the CAC application at the site. This demonstrates the need for a detailed and accurate hydrogeological understanding of contaminated sites before designing and applying stabilization techniques, especially at sites with high geologic and hydrologic complexity. The results herein can serve as a guideline for treating similar sites and help avoid potential pitfalls of remedial efforts.