Case study: Voluntary agreements in environmental management at formosa plastics

Three agreements addressing environmental and safety performance, zero discharge of wastewater and sustainable development have been signed between Formosa Plastics Corporation, Texas (Formosa Plastics), and its former adversaries. The key element of the agreements is the improvement of the affected community. These agreements go beyond public information and beyond procedures for public participation. They have led to meaningful public participation and partnership and are unique in this respect. The following article explores the setup and results of each agreement. The initial agreement, the Blackburn-Formosa Agreement, signed in 1992, set the stage for subsequent partnerships. The Wilson-Formosa Zero Discharge Agreement followed in 1994. Finally, the Sustainable Development Agreement was signed by Jim Blackburn, Diane Wilson, and Formosa Plastics in late 1997. These agreements have proven very successful in avoiding disputes and helping improve company performance in environmental and safety issues. In many respects, these agreements offer a model for others in working with an affected community.     

Results and evaluation of the first study of organochlorine contaminants (PCDDs, PCDFs, PCBs and DDTs), heavy metals and metalloids in birds from Baja California, México

Organochlorine compounds (OCs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p-p'-DDE), heavy metals (Pb, Cd, Zn, Cu), and arsenic were measured in house sparrows (Passer domesticus) and common ground doves (Columbina passerina) from Baja California Sur, México. Concentrations of PCDD/Fs were low, with 21 pg/g for house sparrows, and 7.7 pg/g for common ground doves. Non-ortho-PCB concentrations in house sparrow and common ground doves were 58 and 254 pg/g, respectively, and are within the highest concentrations reported in species that are in the low levels of food webs. The major differences in organochlorine levels between species were found for ortho-PCBs and DDTs. ortho-PCB levels were higher in the seedeater species, whereas DDT levels were higher in the omnivorous species. Heavy metal levels were far below those associated with negative effects.     

Effects of a mixture of tetracyclines to Lemna gibba and Myriophyllum sibiricum evaluated in aquatic microcosms

The impact of a mixture of oxytetracycline, chlortetracycline, tetracycline and doxycycline on Myriophyllum sibiricum and Lemna gibba was investigated using fifteen 12,000-L microcosms (k=5, n=3). Significant concentration-response relationships were only found for M. sibiricum, where dry mass was 69, 47, 30, and 7% of controls at respective treatment concentrations of 0.080, 0.218, 0.668, and 2.289 micromol/L. Somatic endpoints were strongly and negatively correlated with percent light transmission, except plant length, which was positively correlated. Treated microcosms experienced a reduction in the percent of surface irradiance penetrating the water column as high as 99.8% at a depth of 70 cm, relative to controls. Position relative to the water column was likely responsible for the differential effects observed between floating (L. gibba) and submerged (M. sibiricum) species of macrophytes. A hazard quotient assessment of the lowest EC10 value indicated significant risk, exceeding the critical HQ value, but not the lowest EC25 value.     

The economic benefits of fulfilling the World Health Organization’s limits for particulates: A case study in Algeciras Bay (Spain)

Algeciras Bay is an important industrial and port zone in the south of Spain whose pollution by particulate matter surpasses the threshold levels recommended by the World Health Organization (WHO) in its 2005 Guide on Air Quality. This study analyses the mortality avoided and the economic benefit which would be derived from a reduction of the pollution of PM2.5 and PM10 to the levels recommended by the WHO in Algeciras Bay in the period 2005-2015. The analysis carried out shows that the industrial zones, such as Los Barrios and San Roque, are those which have greater levels of pollution and in which the relative risk is greater. The calculations for Algeciras Bay between 2000 and 2015 show 182 deaths which would be avoided if the particulate matter pollution were reduced to the levels recommended by the WHO. Likewise, the economic valuation which this impact has on health is carried out through two concepts: the cost of illness and the Value of Statistical Life (VSL). The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the VSL is 414,787,113€.

Implications: PM_2.5 has a greater concentration in industrial localities and is linked to the industrial activity. When the particulate matter pollution is reduced to the levels recommended by the WHO in an industrialised area such as Algeciras (Spain), 182 deaths which would be avoided. The result shows that the economic benefit that would come out with the cost of illness valuation is 5,329,110€ and from the value of statistical life is 414,787,113€.     

Heavy metal extractable forms in sludge from wastewater treatment plants

The analysis of heavy metals is a very important task to assess the potential environmental and health risk associated with the sludge coming from wastewater treatment plants (WWTPs). However, it is widely accepted that the determination of total elements does not give an accurate estimation of the potential environmental impact. So, it is necessary to apply sequential extraction techniques to obtain a suitable information about their bioavailability or toxicity. In this paper, a sequential extraction scheme according to the BCR's guidelines was applied to sludge samples collected from each sludge treatment step of five municipal activated sludge plants. Al. Cd, Co, Cu, Cr, Fe, Mn, Hg, Mo, Ni, Pb, Ti and Zn were determined in the sludge extracts by inductively coupled plasma atomic emission spectrometry. In relation to current international legislation for the use of sludge for agricultural purposes none of metal concentrations exceeded maximum permitted levels. In most of the metal elements under considerations, results showed a clear rise along the sludge treatment in the proportion of two less-available fractions (oxidizable metal and residual metal).     

Cobalt-based alumina pillared zirconium phosphate catalysts for the selective catalytic reduction of NO by propane

A series of cobalt containing alumina pillared zirconium phosphate materials have been prepared by ion exchange or by impregnation, and fully characterised. The catalytic behaviour of these materials in the selective catalytic reduction of NO by propane, in excess of oxygen, at temperatures ranging between 350 and 550 degrees C, has been also evaluated. A maximum NO conversion close to 14% is obtained on Co-impregnated catalysts heated at 600 degrees C. The NO reduction seems to be related to the presence of Co3+, thus the calcination temperature of samples influences the resulting activity much more than the cobalt content.     

Challenges and Opportunities for Creating Intelligent Hazard Alerts: The “FloodHippo” Prototype

Disasters evolving from hazards are a persistent and deadly occurrence in the United States. Despite this, hazard alerts have remained spatially vague, temporally imprecise, and lack actionable information. These deficiencies indicate a divide between the status quo and what is possible given modern environmental models, geographic information systems (GIS), and smartphone capabilities. This work describes an alternative, prototype system, “FloodHippo,” which integrates operational model outputs, cloud‐based GIS, and expanded communication channels to provide personal and interactive disaster alerts for floods. The precepts and methods underpinning FloodHippo apply equally to other disasters that evolve over space and time, presenting the opportunity for a more intelligent disaster response system. The development of such a system would not only minimize current shortcomings in disaster alerts but also improve resilience through individual action, along with community, academic, and federal cooperation.     

Establishing a Regional Monitoring Strategy: The Pacific Northwest Forest Plan

adaptive monitoring design. Adaptive monitoring design is an iterative process that refines the specifications for monitoring over time as a result of experience in implementing a monitoring program, assessing results, and interacting with users. An adaptive design therefore facilitates ecosystem management. We also discuss lessons of temporal and spatial scales raised by the consideration of a design for ecosystem management. Three additional issues—integration of information from different sources, institutional infrastructure, and the roles of individuals working in an interagency setting—are also identified, but not developed in detail.     

RESEARCH: Comparison of Temporal Trends in Ambient and Compliance Trace Element and PCB Data in Pool 2 of the Mississippi River, USA, 1985–1995

6+ ), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni), selenium (Se), zinc (Zn), and polychlorinated biphenyls (PCBs). Water-column, bed-sediment, and fish-tissue (fillets) data collected by five government agencies comprised the ambient data set; effluent data from five registered facilities comprised the compliance data set. The nonparametric Mann-Kendall trend test indicated that 33% of temporal trends in all data were statistically significant (P < 0.05). Possible reasons for this were low sample sizes, and a high percentage of samples below the analytical detection limit. Trends in compliance data were more distinct; most trace elements decreased significantly, probably due to improvements in wastewater treatment. Seven trace elements (Cr, Cd, Cu, Pb, Hg, Ni, and Zn) had statistically significant decreases in wastewater and portions of either or both ambient water and bed sediment. No trends were found in fish tissue. Inconsistency in trends between ambient and compliance data were often found for individual constituents, making overall similarity between the data sets difficult to determine. Logistical differences in monitoring programs, such as varying field and laboratory methods among agencies, made it difficult to assess ambient temporal trends.     

POTENTIAL EFFECTS OF CLIMATE CHANGE ON AGRICULTURAL WATER USE IN THE SOUTHEAST U.S.1

ABSTRACT: Climate change has the potential to have dramatic effects on the agricultural sector nationally and internationally as documented in many research papers. This paper reports on research that was focused on a specific crop growing area to demonstrate how farm managers might respond to climate-induced yield changes and the implications of these responses for agricultural water use. The Hadley model was used to generate climate scenarios for important agricultural areas of Georgia in 2030 and 2090. Linked crop response models indicated generally positive yield changes, as increased temperatures were associated with increased precipitation and CO2. Using a farm management model, differences in climate-induced yield impacts among crops led to changes in crop mix and associated water use; non-irrigated cropland received greater benefit since irrigated land was already receiving adequate moisture. Model results suggest that farm managers will increase cropping intensity by decreasing fallowing and increasing double cropping; corn acreage decreased dramatically, peanuts decreased moderately and cotton and winter wheat increased. Water use on currently irrigated cropland fell. The potential for increased water use through conversion of agriculturally important, but currently non-irrigated, growing areas is substantial.