Performance evaluation of circulating fluidized bed incineration of municipal solid waste by multivariate outlier detection in China

This first nationwide survey was conducted to evaluate the overall performance of the circulating fluidized bed (CFB) incineration of municipal solid waste (MSW) in 2014-2015 in China. Total 23 CFB incineration power plants were evaluated. The data for monthly average flue gas emission of particles, CO, NO _x , SO₂ and HCl were collected over 12 consecutive months. The data were analyzed to assess the overall performance of CFB incineration by applying the Mahalanobis distance as a multivariate outlier detection method. Although the flue gas emission parameters had met the Chinese national emission standards, there were 11 total outliers (abnormal behavior) detected in 6 out of 23 CFB incineration power plants from the perspective of the MSWincineration performance. The results demonstrate that it is more important for a better performance of CFBs to reduce the frequencies of the MSW load changes, rather than the magnitudes of the MSW load changes, particularly reducing the frequencies in the range of 10% and more of the load changes, under the same and stable conditions. Furthermore, the overloading occurs more often than the underloading during the operation of the CFB incineration power plants in China. The frequent overloading is 0% to 30% of the designed capacity. To achieve the stable performance of CFBs in practice, an appropriately designed MSW storage capacity is suggested to build in a plant to buffer and reduce the frequency of the load changes.

Open image in new window

     

Spatial correlation and influencing factors of industrial agglomeration and pollution discharges: a case study of 284 cities in China

Environmental Science and Pollution Research - Exploring the spatial correlation characteristics and influencing factors of industrial agglomeration and pollution discharge, which is of great...     

农药致慢性细胞毒性及基因毒性机制研究进展

大量流行病学研究和体内、体外检测分析表明,长期低剂量接触农药可以导致人体细胞和分子损伤,诱导细胞凋亡。农药致细胞及DNA损伤的机制主要与DNA加合物的形成、DNA单链和/或双链的断裂有关。此外,氧化应激参与农药致细胞及DNA损伤的过程,可能成为农药致细胞及DNA损伤的促发因素。从总体上看,其具体分子机制还不十分清楚,有待进一步研究。     

Nitrogen fertility and abiotic stresses management in cotton crop: a review

This review outlines nitrogen (N) responses in crop production and potential management decisions to ameliorate abiotic stresses for better crop production. N is a primary constituent of the nucleotides and proteins that are essential for life. Production and application of N fertilizers consume huge amounts of energy, and excess is detrimental to the environment. Therefore, increasing plant N use efficiency (NUE) is important for the development of sustainable agriculture. NUE has a key role in crop yield and can be enhanced by controlling loss of fertilizers by application of humic acid and natural polymers (hydrogels), having high water-holding capacity which can improve plant performance under field conditions. Abiotic stresses such as waterlogging, drought, heat, and salinity are the major limitations for successful crop production. Therefore, integrated management approaches such as addition of aminoethoxyvinylglycine (AVG), the film antitranspirant (di-1-p-menthene and pinolene) nutrients, hydrogels, and phytohormones may provide novel approaches to improve plant tolerance against abiotic stress-induced damage. Moreover, for plant breeders and molecular biologists, it is a challenge to develop cotton cultivars that can tolerate plant abiotic stresses while having high potential NUE for the future.     

Dental enamel as biomarker for environmental contaminants in relevant industrialized estuary areas in São Paulo,Brazil

Heavy metal contamination is a long-standing and very well-known public health problem, and its exposure can cause damage to several organs of human body, especially on the central nervous system of young children and teenagers. The aim of this article is to evaluate lead, cadmium, and manganese contamination in 125 children from 6 to 13 years old living in contaminated areas during the period from 2006 to 2009 (São Vicente, Cubatão Downtown, Bertioga and Cubatão Pilões/Água Fria). This estuary area is the most important example of environmental degradation by chemicals from industrial sources. This is a cross-sectional study through clinical examinations and dental enamel tests. All mothers from these children lived in the area since before the pregnancy. Lead, cadmium, and manganese levels (μg/g) were measured on dental enamel samples through graphite furnace atomic absorption spectrometry, searching for the occurrence of heavy metals. The mean lead concentrations were 139.48 μg/g in Cubatão Pilões/Água Fria, 170.45 μg/g in Cubatão Downtown, 213.52 μg/g in São Vicente, and 151.89 μg/g in Bertioga. The mean cadmium concentrations were 10.83 μg/g in Cubatão Pilões/Água Fria, 12.58 μg/g in Cubatão Downtown, 10.92 μg/g in São Vicente, and 14.57 μg/g in Bertioga. The mean manganese concentrations were 23.49 μg/g in Cubatão Pilões/Água Fria, 30.90 μg/g in Cubatão Downtown, 41.46 μg/g in São Vicente, and 42.00 μg/g in Bertioga. Dental surface enamel may be used as an efficient biomarker of past environmental exposure to lead, manganese, and cadmium which are associated to well-known sources of heavy metal contamination. The results suggest that the evaluated children were exposed to sources of lead, cadmium, and manganese since before their conceptions. Although Bertioga initially was chosen as a control area of this study, it was also was verified to have heavy metal contamination on examined children.     

Assessing demineralization treatments for PVC effluent reuse in the resin polymerization step

To reduce fresh water consumption in a polyvinyl chloride (PVC) plant, the effluent from a biological treatment must be demineralized to be re-used in the resin polymerization process. Demineralization is a critical process, since the quality and the stability of the PVC resins are highly influenced by the water quality used in the process. The main target values for water parameters are the following: conductivity <10 μScm^?1, TOC < 10 mg L^?1, and Al < 0.1 mg L^?1. To achieve this quality, several reverse osmosis membranes from different materials and suppliers were tested and compared in the demineralization treatment. Polyamide membranes showed higher salt rejection compared to cellulose acetate membranes yielding both types similar flux and permeability. Two-pass reverse osmosis treatment was necessary to reach conductivities lower than 10 μS cm^?1. On the other hand, a good quality effluent for reuse was obtained by combining RO and ionic exchange resins. Results showed that good quality PVC resins in terms of color, granulometry, porosity, and bulk density were obtained when demineralized water from two-pass reverse osmosis was used as fresh water, proving the feasibility of the effluent reuse in the PVC industry.     

Destabilising automobility? The emergent mobilities of generation Y

This paper uses empirical material gathered with young adults in New Zealand to examine a potential sustainability transition-in-practice. It draws from two frameworks; the actor-centred Energy Cultures Framework to explore mobility behaviours, and the multi-level perspective (MLP) to situate behaviour change within the socio-technical transitions literature. The MLP has traditionally been used to analyse historical transitions (e.g. from the horse and cart to the motor vehicle), but in this paper, it is used to explore an on-going change trend; the emergent mobilities of young adults who appear to be aspiring for different types of mobility. A series of mobility trends are described, which emerged from a programme of qualitative interviews (n = 51). The material culture, norms and practices that constitute these trends are articulated. These are then considered through the lens of the MLP. The evidence points to emergent trends of multimodality that, if leveraged upon and supported, could contribute to a systemic sustainability transition.     

Melt Flow Behavior and Processability of Polylactic Acid/Polystyrene (PLA/PS) Polymer Blends

The present investigation dealt with the flow behavior and processability of polylactic acid/polystyrene (PLA/PS) polymer blends using a capillary rheometer. For this purpose, PLA/PS blends with different ratios of the concentrations were prepared using a single screw extruder. The shear viscosity, shear stress, shear rate, power-law index, viscous activation energy at a constant shear stress, and elongational stress were determined. PLA/PS blends exhibited a typical shear-thinning behavior over the entire range of shear rates tested, and the viscosity values of the blends would tend to decrease with increasing amount of PLA. In addition, the polymer blend of 70 % PLA and 30 % PS was found to be relatively less sensitive to the processing temperature, implying that the extrusion process was more desirable for fabrication of PLA/PS polymer blend than the injection process.     

Bringing together raptor collections in Europe for contaminant research and monitoring in relation to chemicals regulations

Raptors are good sentinels of environmental contamination and there is good capability for raptor biomonitoring in Europe. Raptor biomonitoring can benefit from natural history museums (NHMs), environmental specimen banks (ESBs) and other collections (e.g. specialist raptor specimen collections). Europe’s NHMs, ESBs and other collections hold large numbers of raptor specimens and samples, covering long periods of time. These collections are potentially a valuable resource for contaminant studies over time and space. There are strong needs to monitor contaminants in the environment to support EU and national chemical management. However, data on raptor specimens in NHMs, ESBs and other collections are dispersed, few are digitised, and they are thus not easy to access. Specimen coverage is patchy in terms of species, space and time. Contaminant research with raptors would be facilitated by creating a framework to link relevant collections, digitising all collections, developing a searchable meta-database covering all existing collections, making them more visible and accessible for contaminant research. This would also help identify gaps in coverage and stimulate specimen collection to fill gaps in support of prioritised contaminant monitoring. Collections can further support raptor biomonitoring by making samples available for analysis on request.     

3种镉超富集植物毛状根体系对镉胁迫响应的比较

近年来,转基因毛状根组织被越来越多地应用于重金属和有机污染物的植物修复技术研究中,已成为进行污染物毒性响应机制研究的便捷的实验室工具。为了探究龙葵、油菜、芥菜3种镉(cadmium,Cd)超富集植物对Cd毒性胁迫响应的差异,以诱导出的3种植物毛状根为研究材料,从毛状根的生长状态、富集Cd的能力、根组织细胞的凋亡程度和抗氧化酶活性等方面进行了探讨。结果表明:Cd浓度为0~50μmol·L-1时,龙葵、油菜、芥菜毛状根受Cd毒害的影响都不明显;Cd浓度为75~100μmol·L-1时,龙葵、油菜、芥菜毛状根均表现出对Cd胁迫的防御响应。在较高的Cd浓度(100μmol·L-1)下,龙葵毛状根的生物量受Cd毒害的影响最小,芥菜次之,油菜受影响最大;同时龙葵毛状根富集的Cd含量最高(745.0μg·g-1),芥菜次之(681.4μg·g-1),油菜最差(505.2μg·g-1)。龙葵、油菜、芥菜毛状根在Cd胁迫下的细胞凋亡水平均随Cd浓度的升高而升高,当Cd浓度为100μmol·L-1时,龙葵毛状根比油菜和芥菜毛状根的细胞凋亡程度均低。同时3种植物毛状根在不同浓度Cd处理下抗氧化酶活性的变化有一定差异。从上述结果综合来看,龙葵毛状根受Cd毒害的影响最小、富集Cd的能力最好,是进一步开展Cd超富集植物转基因改造研究的较好的实验室载体。