Assessing water quality in rivers with fuzzy inference systems: a case study

In recent years, fuzzy-logic-based methods have demonstrated to be appropriated to address uncertainty and subjectivity in environmental problems. In the present study, a methodology based on fuzzy inference systems (FIS) to assess water quality is proposed. A water quality index calculated with fuzzy reasoning has been developed. The relative importance of water quality indicators involved in the fuzzy inference process has been dealt with a multi-attribute decision-aiding method. The potential application of the fuzzy index has been tested with a case study. A data set collected from the Ebro River (Spain) by two different environmental protection agencies has been used. The current findings, managed within a geographic information system, clearly agree with official reports and expert opinions about the pollution problems in the studied area. Therefore, this methodology emerges as a suitable and alternative tool to be used in developing effective water management plans.     

Estimating the environmental impact of micro-pollutants in the low Ebro River (Spain): an approach based on screening toxicity with Vibrio fischeri

The aim of this study was to assess the likely impacts on the ecosystems due to agricultural, human, and industrial activities carried out in an ecologically important area of the Ebro River (Spain). For it, a screening site specific ecological risk assessment was conducted. Considering the presence of high levels of potentially toxic substances, such as metals and chlorinated organic compounds, aqueous and organic extracts were used to assess toxicity in sediments by using the photo-luminescent bacteria Vibrio fischeri (Microtox) as screening response variable. Sediment samples collected during 2005-2006 in the last course of the Ebro River and its Delta have been analyzed. Toxic responses have shown strong relationships to the levels of pollutants in the area. Moreover, various sites presented some toxicity level, probably because of other factors associated with reducing environments into the sediments. Results indicate that Microtox bioassay is an appropriate tool to perform risk assessment studies at screening level.     

Water reuse in tannery beamhouse process

In tanneries, the phases of conditioning and preparing the hide for tanning, as well as the transportation and fixation of tanning substances, are all carried out in aqueous media. Most of the steps of these processes are carried out with fresh water, which is used as a vehicle for the diffusion of chemical products and the extraction of undesirable materials from the hide. The objective of this study is to provide the minimization of water consumption at tanneries by applying the reuse of water at some stages of the process. Alternatives for water reuse were evaluated through analysis of the process wastewater to determine the concentration of some contaminant parameters. In tests with half-hides, the possibility of reusing the liquors from the 2nd bating washing in the 1st bating washing, and of reusing the liquors from the pre-deliming washing in the pre-deliming operation, was verified. In industrial scale the water reuse from a mixture of bating washings in the deliming and deliming bating was tested successfully. The quality of wet-blue leather analyzed in the systems with and without water reuse did not show any considerable differences and satisfies the tannery specifications. Finally, a mathematical program for mass integration was applied to solve the problem of water reuse in the beamhouse steps.     

Human health risks of petroleum-contaminated groundwater

BACKGROUND, AIM AND SCOPE: The volatile organic compounds Benzene, Toluene, Ethylbenzene and Xylene (BTEX) are commonly found in petroleum derivatives and, at relatively high levels, can be associated with human health risks. Due to industrial activities, accidental petroleum spills are the main route of soil and groundwater contamination. The aim of the present study was to evaluate the indoor health risks due to tap water consumption contaminated by BTEX. MATERIALS AND METHODS: BTEX indoor exposure can occur through three principal pathways: inhalation, ingestion and dermal absorption. A multiphase and multicomponent model was used to simulate BTEX transport in groundwater. For evaluation of human risks due to the use of contaminated tap water, a mathematical model was elaborated. RESULTS: BTEX concentrations in a drinking well were obtained as a function over time. These concentrations were used to obtain the exposure due to the use of water from the contaminated drinking well. In addition to showing the highest concentration in water, benzene was the compound that remained for a longer period before being completely degraded. For all the evaluated BTEX, oral ingestion was also the main pathway of exposure for adults, whereas the contribution of inhalation and oral exposition in children were seen to be of the same magnitude. The sensitivity analysis of BTEX total dose for adults showed that direct ingestion was the most significant factor, followed by shower time, volume of the shower room, inhalation rate, and shower flow rate. For children, the most significant variable was also direct ingestion, followed by shower time, volume of the shower room, and body weight. DISCUSSION: In the current design situation, there would not be any health risks by the use of BTEX-contaminated water to the general population living in the neighborhood of the petroleum spill. Therefore, no remediation measures in the area of the spill would be necessary. CONCLUSIONS: The present results indicate that the design of a good scenario can perform an accuracy risk assessment. This model can serve as a useful tool for predicting indoor exposure to substances for which no direct data are available, reducing monitoring efforts and observing how different processes affect outcomes. RECOMMENDATIONS AND PERSPECTIVES: These preliminary data allow the establishment of a basis for further investigations focusing on efficiently recovering petroleum from contaminated sites.     

Environmental analysis of a construction and demolition waste recycling plant in Portugal – Part II: Environmental sensitivity analysis

Part I of this study deals with the primary energy consumption and CO₂eq emissions of a 350 tonnes/h construction and demolition waste (CDW) recycling facility, taking into account incorporated, operation and transportation impacts. It concludes that the generated impacts are mostly concentrated in operation and transportation, and that the impacts prevented through material recycling can be up to one order of magnitude greater than those generated.However, the conditions considered for the plant’s operation and related transportation system may, and very likely will, vary in the near future, which will affect its environmental performance. This performance is particularly affected by the plant’s installed capacity, transportation fuel and input CDW mass. In spite of the variations in overall primary energy and CO₂eq balances, the prevented impacts are always higher than the generated impacts, at least by a factor of three and maybe even as high as 16 times in particular conditions. The analysis indicates environmental performance for variations in single parameters, except for the plant’s capacity, which was considered to vary simultaneously with all the others. Extreme best and worst scenarios were also generated to fit the results into extreme limits.     

Spatio-temporal modeling of benthic biological species

The spatial and temporal distribution of the number of benthic species located in an important area under ecological stress (Puerto CALICA, Quintana Roo, Mexico) is analyzed by means of Gaussian Spatial Linear Mixed Models. Following a model-based approach we derive spatial predictions taking into account temporal variations between May 1996 and June 1999. The proposed models were evaluated in terms of their ability to detect the underlying spatial structure for further interpolation. Uncertainty in the prediction could be evaluated by using the Bayesian paradigm. The results can be used as a guide for further environmental management policies in the region.     

Environmental monitoring of carbaryl applied in urban areas to control the glassy-winged sharpshooter in California

Carbaryl insecticide was applied by ground spray to plants in urban areas to control a serious insect pest the glassy-winged sharpshooter, Homalodisca coagulata (Say), newly introduced inCalifornia. To assure there are no adverse impacts to human health and the environment from the carbaryl applications, carbaryl was monitored in tank mixtures, air, surface water, foliage and backyard fruits and vegetables.Results from the five urban areas – Porterville, Fresno, Rancho Cordova, Brentwood and Chico – showed there were no significanthuman exposures or impacts on the environment. Spray tank concentrations ranged from 0.1–0.32%. Carbaryl concentrationsin air ranged from none detected to 1.12 g m^-3, well below the interim health screening level in air of 51.7 g m^-3. There were three detections of carbaryl in surface water nearapplication sites: 0.125 ppb (parts per billion) from a water treatment basin; 6.94 ppb from a gold fish pond; and 1737 ppbin a rain runoff sample collected from a drain adjacent to a sprayed site. The foliar dislodgeable residues ranged from 1.54–7.12 g cm^-2, comparable to levels reported forsafe reentry of 2.4 to 5.6 g cm^-2 for citrus. Carbarylconcentrations in fruits and vegetables ranged from no detectableamounts to 7.56 ppm, which were below the U.S.EPA tolerance, allowable residue of 10 ppm.     

Copper, Copper Mining Effluents and Grazing as Potential Determinants of Algal Abundance and Diversity in Northern Chile

We experimentally tested threealternative hypotheses to explain the low algaldiversity and abundance in an intertidal zonereceiving the effluents of the copper mine El Salvadorin northern Chile. Our results demonstrated thatalgae were able to grow at the levels of dissolvedcopper detected in coastal waters of the area. Duringthe assays, growth and regeneration in several red,green and brown adult algae and juvenile Lessonia nigrescens were normal at copper levels of150 g L^-1 or, in some cases, higher. Wealso found that the coastal sea water mixed with theeffluent was not lethal to algae, although in somecases minor effects on growth were detected. Theseresults indicate that today's low algal diversity andabundance can not be explained by the current copperlevels in the area nor by the effect of the effluent.Exclusion of grazers, however, resulted in a fastcolonization by various algal species. This, togetherwith atypically high grazer density at the areas underthe influence of the effluent, strongly suggests thatherbivory, a factor not directly related to the miningoperation, is likely to be responsible for the lowalgal diversity and abundance in the studied locality.