International guidelines on mercury management in small-scale gold mining

This article reports on a stakeholder engagement process to develop the International Guidelines on Mercury Management in Small-Scale Gold Mining. Commissioned by the United Nations Global Mercury Project, the purpose of the guidelines is to assist policymakers, practitioners, researchers, miners and the public in developing strategies for reducing mercury use, eliminating major pollution point sources and reducing risks. The guidelines are proposed with the view of supporting miners and their communities by promoting safer, more efficient practices that improve environmental and human health. The paper discusses challenges in addressing mercury issues and technical measures in the guidelines. The paper also highlights the need for interactive engagement in communities to discuss and adapt the guidelines as appropriate, in order to create technology transfer strategies, regulatory measures and strategic priorities that are suitable to the local context.     

Rare earth elements as critical raw materials: Focus on international markets and future strategies

Supply of some critical raw materials by European industry is becoming more and more difficult. After the case of natural textile fibres, in particular cotton, and timber, over the last few years the problem of rare earths (REs) availability has also risen. The 97% of the global supply of rare earth metals (REMs) is produced by China, that has recently done copious cuts of its exports, apparently in order to protect its environment. This fact has greatly increased the REs prices, causing tension and uncertainty among the world hi-tech markets. Many of these materials, in fact, have very few effective substitutes and low recycling rates too. In addition, their natural reserves of rare earths are concentrated in a small number of countries (China, Brazil, US, Russia, Democratic Republic of Congo). REMs are a group of 17 elements particularly used in many new electronic and advanced components: such as fuel cells, mobile phones, displays, hi-capacity batteries, permanent magnets for wind power generation, green energy devices, etc. Many analysts foresee much more requests in the next decades.     

Ozone sensitivity of currant tomato (Lycopersicon pimpinellifolium), a potential bioindicator species

The wild tomato species Lycopersicon pimpinellifolium (currant tomato) was exposed to different O3 concentration, both in controlled environment fumigation facilities and in open-top chambers, to assess its sensitivity and to verify its potential as a bioindicator plant. Plants appeared particularly sensitive to O3 at an early stage of growth, responding with typical chlorotic spots within 24 h after exposure to a single pulse of 50 ppb for 3 h, and differentiating peculiar symptoms, such as reddish necrotic stipples, bronzing and extensive necrosis, depending on O3 concentration. Histo-cytochemical investigations with 3,3'-diaminobenzidine, to localize H2O2, and Evans blue, to detect dead cells, suggested that currant tomato sensitivity to O3 could be due to a deficiency in the anti-oxidant pools. The combination of these stainings proved to be useful, either to predict visible symptoms, early before their appearance, and to validate leaf ozone injury.     

Combination of beehive matrices analysis and ant biodiversity to study heavy metal pollution impact in a post-mining area (Sardinia, Italy)

Mining activities represent a major source of environment contamination. The aim of this study was to evaluate the use of bees and ants as bioindicators to detect the heavy metal impact in post-mining areas. A biomonitoring programme involving a combination of honeybee hive matrices analysis and ant biodiversity survey was conducted over a 3-year period. The experimental design involved three monitoring stations where repeated sampling activities focused on chemical detection of cadmium (Cd), chrome (Cr) and lead (Pb) from different matrices, both from hosted beehives (foraging bees, honey and pollen) and from the surrounding environment (stream water and soil). At the same time, ant biodiversity (number and abundance of species) was determined through a monitoring programme based on the use of pitfall traps placed in different habitats inside each mining site. The heavy metal content detected in stream water from the control station was always below the analytical limit of quantification. In the case of soil, the content of Cd and Pb from the control was lower than that of mining sites. The mean heavy metal concentrations in beehive matrices from mining sites were mainly higher than the control, and as a result of regression and discriminant analysis, forager bee sampling was an efficient environmental pollution bioindicator. Ant collection and identification highlighted a wide species variety with differences among habitats mostly associated with vegetation features. A lower variability was observed in the polluted landfill characterised by lack of vegetation. Combined biomonitoring with forager bees and ants represents a reliable tool for heavy metal environmental impact studies.     

Photochemical production of organic matter triplet states in water samples from mountain lakes, located below or above the tree line

The production of triplet states (T(*)) of chromophoric dissolved organic matter (CDOM), reacting with the probe molecule 2,4,6-trimethylphenol (TMP) was measured upon irradiation of water samples, taken from lakes located in a mountain area (NW Italy) between 1450 and 2750 m above sea level. The lakes are located below or above the tree line and surrounded by different vegetation types (trees, alpine meadows or exposed rocks). The most photoactive samples belonged to lakes below the tree line and their fluorescence spectra and CDOM optical features suggested the presence of a relatively elevated amount of humic (allochthonous) material. The lowest (negligible) photoactivity was found for a lake surrounded by exposed rocks. Its CDOM showed an important autochthonous contribution (due to in-lake productivity) and considerably higher spectral slope compared to the other samples, suggesting low CDOM molecular weight and/or aromaticity. Among the samples, CDOM photoactivity (measured as the rate of TMP-reactive T(*) photoproduction) decreased with changing vegetation type in the order: trees, meadows, rocks. It could be connected with decreasing contribution from catchment runoff and increasing contribution from autochthonous processes and possibly precipitation.     

Coastal setbacks for the Mediterranean: a challenge for ICZM

Coastal development along the Mediterranean coast needs to be tackled with an integrated approach, in order to safeguard people and properties from extreme events, maintain environmental flows and ecosystems functions, protect coastal landscapes and ensure public accessibility to the shore. The complexity of the Mediterranean countries legal and administrative framework and its morphological heterogeneity make the implementation of new the Protocol on ICZM provisions on coastal setbacks,—claiming for a 100 m wide buffer zone where construction is not allowed— a challenge for the success of the initiative. European countries and the European Commission are party to the protocol but the European legal framework lacks of specific provisions addressing the definition of coastal setbacks. Moreover, climate change, in terms of sea level rise and maritime climate, could play a major role in the future position of setback lines. While arbitrary setbacks should be put in place to halt short-term unwise coastal development, science can improve the identification of coastal setbacks by providing integrated methodologies to be implemented at the local level. The objective of this paper is to review concepts and practices in the use of coastal setbacks, in the context of the provisions of the ICZM protocol and taking into account new challenges posed by climate change. A stepwise route map is proposed as a base to identify coastal setbacks, applicable to the Mediterranean region and elsewhere, to be used as a base to improve arbitrary setback approaches.     

Coastal setbacks for the Mediterranean: a challenge for ICZM

Coastal development along the Mediterranean coast needs to be tackled with an integrated approach, in order to safeguard people and properties from extreme events, maintain environmental flows and ecosystems functions, protect coastal landscapes and ensure public accessibility to the shore. The complexity of the Mediterranean countries legal and administrative framework and its morphological heterogeneity make the implementation of new the Protocol on ICZM provisions on coastal setbacks,—claiming for a 100 m wide buffer zone where construction is not allowed— a challenge for the success of the initiative. European countries and the European Commission are party to the protocol but the European legal framework lacks of specific provisions addressing the definition of coastal setbacks. Moreover, climate change, in terms of sea level rise and maritime climate, could play a major role in the future position of setback lines. While arbitrary setbacks should be put in place to halt short-term unwise coastal development, science can improve the identification of coastal setbacks by providing integrated methodologies to be implemented at the local level. The objective of this paper is to review concepts and practices in the use of coastal setbacks, in the context of the provisions of the ICZM protocol and taking into account new challenges posed by climate change. A stepwise route map is proposed as a base to identify coastal setbacks, applicable to the Mediterranean region and elsewhere, to be used as a base to improve arbitrary setback approaches.     

Mill leaching: a viable substitute for mercury amalgamation in the artisanal gold mining sector?

Artisanal small-scale gold miners (ASM) occasionally employ whole ore amalgamation by adding mercury into ball mills to recover gold. In this process, 25–30% of the mercury added is lost to the environment. It is also inefficient less than 30% of gold is recovered. Amalgamation, followed by cyanidation, has been observed at many artisanal mining sites. This combination poses additional environmental and health consequences. Tests with ore samples from Talawaan, North Sulawesi, Indonesia indicate the possibility of replacing mercury by cyanidation in the ball mill, reaching gold extraction of 93% in 6 h of leaching. The gold in the Indonesian ore sample is fine and less than 8% of gold recovery was obtained with gravity concentration of the ore ground 80% below 0.25 mm, which is a reasonably fine grain size for artisanal gold operations. Replacing mercury addition with cyanidation in ball mills was implemented in one artisanal gold mining operation in Portovelo, Ecuador, achieving 95% of gold extraction in 8 h of mill leaching. This technique demonstrated a drastic improvement in gold recovery. It was found to be a simple, inexpensive technique well accepted by local miners. The results from laboratory and field tests are promising; however a thorough investigation into the socio-economic and environmental aspects of this presented alternative must be conducted prior to introduction.     

Multi-metric evaluation of the models WARM,CropSyst, and WOFOST for rice

WARM (Water Accounting Rice Model) simulates paddy rice (Oryza sativa L.), based on temperature-driven development and radiation-driven crop growth. It also simulates: biomass partitioning, floodwater effect on temperature, spikelet sterility, floodwater and chemicals management, and soil hydrology. Biomass estimates from WARM were evaluated and compared with the ones from two generic crop models (CropSyst, WOFOST). The test-area was the Po Valley (Italy). Data collected at six sites from 1989 to 2004 from rice crops grown under flooded and non-limiting conditions were split into a calibration (to estimate some model parameters) and a validation set. For model evaluation, a fuzzy-logic based multiple-metrics indicator (MQI) was used: 0 (best) ≤ MQI ≤ 1 (worst). WARM estimates compared well with the actual data (mean MQI = 0.037 against 0.167 and 0.173 with CropSyst and WOFOST, respectively). On an average, the three models performed similarly for individual validation metrics such as modelling efficiency (EF > 0.90) and correlation coefficient (R > 0.98). WARM performed best in a weighed measure of the Akaike Information Criterion: (worst) 0<wk<1$0<w_k<1$ (best), considering estimation accuracy and number of parameters required to achieve it (mean wk=0.983$w_k=0.983$ against 0.007 and ∼0.000 with CropSyst and WOFOST, respectively). WARM results were sensitive to 30% of the model parameters (ratio being lower with both CropSyst, <10%, and WOFOST, <20%), but appeared the easiest model to use because of the lowest number of crop parameters required (10 against 15 and 34 with CropSyst and WOFOST, respectively). This study provides a concrete example of the possibilities offered using a range of assessment metrics to evaluate model estimates, predictive capabilities, and complexity.     

Anthropic vs. natural shoreline changes along the northern Campania coast,Italy

Analysis of historical cartography, wind direction data, orientation of Volturno River mouth and shoreline changes through time point out a series of morphological changes due both to natural and man-induced processes, which occurred along the Domitia coast (Litorale Domitio) since the second half of the 50s. Meteorological time series analysis showed evidence of a change in wind frequency and direction before and after the second half of the 70s, with almost complete disappearance of wind calm periods. Particularly, after 1975, the angle of wave attack had changed and intensity and frequency increased, thus accelerating coastal erosion in some areas. The morphological response to these environmental changes, likely due to global warming and short climatic crises interacting with anthropic modifications of landscape, resulted in different orientation of the Volturno River mouth which rotated from NW (between the 50s and 70s) to SW (from the mid-70s until the present). Moreover, the NW-SE littoral drift caused a clockwise rotation of the entire coastal segment with fulcrum pole close to the river mouth, since the 50s. These findings may allow the assessment of land-use scenarios tuned with evolution trends in order to properly address planning of these reactive and dynamic landscapes.