Examination of compensatory model application in site selection

Nowadays, usage of compensatory models in land evaluation process and site selection is broadly observed. Meanwhile, methods such as analytical hierarchy process are used more than the others. Whether the usage of compensatory model methods in site selection studies is essentially correct or not is an issue that should be hesitated. In this model, inefficiency of a factor, to be offset by strength of others, means that in urban development site selection, if somewhere has unsuitable aspect but suitable slope, the aspect deficiency will be compensated by the slope. But quodlibet reflection is that in this model, sometimes, deficiency of proximity to fault can be compensated by other parameters strength. And finally, a place is diagnosed as a suitable area for urban development that is close to the fault. This research aims at examination of compensatory models application in urban development site selection of Taleghan Basin using analytical hierarchy process as one of the compensatory model methods. Among this the weaknesses and strengths of compensatory model were analyzed carefully. Results indicate that despite usefulness of this model in being fast, easy, and low expense, it has some weaknesses like very high sensitivity to decision maker’s idea.     

Evaluation of the use of diffusive air samplers for determining temporal and spatial variation of volatile organic compounds in the ambient air of urban communities

The Houston-Galveston metropolitan area has a relatively high density of point and mobile sources of air toxics, and determining and understanding the relationship between emissions and ambient air concentrations of air toxics is important for evaluating potential impacts on public health and formulating effective regulatory policies to control this impact, both in this region and elsewhere. However, conventional ambient air monitoring approaches are limited with regard to expense, siting limitations, and representative sampling necessary for adequate exposure assessment. The overall goal of this multiphase study is to evaluate the use of simple passive air samplers to determine temporal and spatial variability of the ambient air concentrations of selected volatile organic compounds (VOCs) in urban areas. Phase 1 of this study, reported here, was a field evaluation of 3M organic vapor monitors (OVMs) involving limited comparisons with commonly used active sampling methods, an assessment of sampler precision, a determination of optimal sampling duration, and an investigation of the utility of a simple modification of the commercial sampler. The results indicated that a sampling duration of 72 hr exhibited generally low bias relative to automated continuous gas chromatography measurements, good overall precision, and an acceptable number of measurements above detection limits. The modified sampler showed good correlation with the commercial sampler, with higher sampling rates, although lower than expected.     

Application of network method as a tool for integrating biodiversity values in Environmental Impact Assessment

Highway construction or expansion projects are among major activities of economic development especially in developing countries. However, road development consistently can lead to major damages to the environment, including habitat fragmentation and ecological instabilities and a considerable threat to fauna and flora. At this point, Environmental Impact Assessment (EIA) in road developments is needed to address and evaluate the ecological issues in decision-making. The object of this study is to strengthen the consideration of ecological issues, i.e., biodiversity in the existing EIA tools. This paper regards a network method as a means to make informed planning decisions by the lessons from a case study. The results indicate that network method is well suited to be applied in ecological impacts assessment. However, some limitations such as complexity and time consumed make casual networks unpopular. Also, impact of traffic noise on acoustic communication (wildlife and human) was performed. It has been shown that sound level for human is much higher than admissible standards. Finally, the study expresses some mitigation measures to improve the acquisition for environmental impact assessment process.     

A review of recent developments in the application of machine learning in solar thermal collector modelling

Environmental Science and Pollution Research - Over the past few decades, the popularity of solar thermal collectors has increased dramatically because of many significant advantages like being a...     

Health effects associated with long-term occupational exposure of employees of a chlor-alkali plant to mercury

This study aimed to evaluate possible health effects associated with long-term occupational exposure to low levels of mercury vapors. Forty-six subjects exposed to mercury and 65 healthy unexposed employees were studied. The subjects were administered a questionnaire on experienced symptoms and underwent clinical examinations as well as routine biochemical tests. Atmospheric and urinary concentrations of mercury were measured, too. Environmental concentrations of mercury were estimated to be 3.97 ± 6.28 μg/m(3) and urinary concentrations of mercury in exposed and referent groups were 34.30 ± 26.77 and 10.15 ± 3.82 μg/dm(3), respectively. Additionally, symptoms such as somatic fatigue, anorexia, loss of memory, erethism, blurred vision and teeth problems were significantly more common among exposed individuals. These observations indicate that occupational exposure to mercury vapors, even at low levels, is likely to be associated with neurological and psychological symptoms.     

Long-term impact of municipal sewage irrigation on treated soil and black locust trees in a semi-arid suburban area of Iran

The effects of municipal sewage irrigation on the soil and black locust (Robinia pseudoacacia L.) tree were studied. For this purpose, two artificial black locust stands under irrigation of municipal sewage and well water were selected in south of Tehran, Iran. Data were collected using technique of systematic random sampling with 4 replicates in each stand. It was found that the growth of black locust tree, as indicated by diameter at breast height, total height, crown length, average crown diameter, basal area and volume, in sewage irrigation stand was much higher than that of well water irrigation stand (P < 0.01). Plant analysis indicated that concentrations of leaf nutrients (N, P, K, Ca, Mg, Na, Fe, Mn, Cu and Zn) were greater in sewage-irrigated trees, without toxicity to the minerals of tree leaf, than those of well waterirrigated trees, and positively correlated with their respective value in soil. Ni, Cr and Pb were not detected in leaf samples. Application of sewage resulted in a 1.5-fold increase in the concentrations of soil nutrients, Ni, Cr and Pb. Among these minerals only Pb and Ni in some soil samples exceeded the toxicity limit. The increase in pH, electrical conductivity (EC) and organic carbon of soil was also observed in sewage irrigation. Results confirm that besides the use as irrigation water, municipal sewages are also a potential source of plant nutrients. However, significant accumulation of heavy metals such as Pb and Ni in soil needs to be monitored.     

Optimization of carbon dioxide absorption in a continuous bubble column reactor using response surface methodology

Carbon dioxide absorption using amine based solvents is a well-known approach for carbon dioxide removal. Especially with the increasing concerns about greenhouse gas emissions, there is a need for an optimization approach capable of multifactor calibration and prediction of interactions. Since conventional methods based on empirical relations are not efficiently applicable, this study investigates use of Response Surface Methodology as a strong optimization tool. A bubble column reactor was used and the effect of solvent concentration (10.0, 20.0 and 30.0 vol%), flow rate (4.0, 5.0 and 6.0 L min⁻¹), diffuser pore size (0.5, 1.0 and 1.5 mm) and temperature (20.0, 25.0 and 30.0°C) on the absorption capacity and also overall mass transfer coefficient was evaluated. The optimization results for maintaining maximum capacity and overall mass transfer coefficient revealed that different optimization targets led to different tuned operational factors. Overall mass transfer coefficient decreased to 34.7 min⁻¹ when the maximum capacity was the desired target. High reaction rate along with the highest absorption capacity was set as desirable two factor target in this application. As a result, a third scenario was designed to maximize both mass transfer coefficient and absorption capacity simultaneously. The optimized condition was achieved when a gas flow rate of 5.9 L min⁻¹, MEA solution of 29.6 vol%, diffuser pore size of 0.5 mm and temperature of 20.6°C was adjusted. At this condition, mass transfer coefficient reached a maximum of 38.4 min⁻¹, with a forecasted achievable absorption capacity of 120.5 g CO₂ per kg MEA.     

Optimization and treatment of wastewater of crude oil desalting unit and prediction of scale formation

In this article, one of Iran’s southwest oil fields that produces 3200 barrels per day (bbl/d) of wastewater from oil and gas processing was investigated. Experimental analysis of oil reservoir water and desalting wastewater disposal of crude oil desalting unit was performed. First, water was treated with a reverse osmosis membrane. As a result, the purified water, with lower total dissolved solids (TDS) and pH, was a suitable candidate for injection into the adjacent wells of the crude oil desalting unit. The effectiveness and compatibility of this wastewater to the formation water of the oil field wells were simulated. Finally, we studied and identified the formation, the amount, and the type of mineral scale deposits. These are the most important problems during water injection into the wells. The analysis shows that the refined water from the reverse osmosis (RO) process was a suitable and low-cost economical option for injection in onshore and offshore fields, due to the low amount of salts, the concentration of susceptible ions in scaling formation, and the appropriate pH. This oil field, which is in the second half of life, requires enhanced oil recovery methods (EOR) for the maintenance of pressure and an increase in oil recovery.

     

Assessment of anticipated performance index of some deciduous plant species under dust air pollution

Environmental Science and Pollution Research - Green vegetation improvement is an economical strategy to mitigate dust air pollution. The anticipated performance index (API) is considered a main...