Coloured rain dust from Sahara Desert is still radioactive

A coloured rain event originating from the Sahara Desert occurred on April 9, 2000 at Thessaloniki, Northern Greece (40 degrees 38'N, 22 degrees 58'E). The radioactive nuclides that were determined in a coloured rain dust sample were 137Cs of Chernobyl origin, 7Be of cosmogenic origin and 40K of terrestrial origin. Cesium-137 still remained 14 years after the Chernobyl accident, reaching 26.6 Bq kg-1 in the coloured rain dust.     

Contamination of Austrian soil with caesium-137

Austria ranks among the countries that have been most strongly affected by the Chernobyl fallout. The mean contamination with 137Cs is 21.0 kBq/m2, of which 18.7 kBq/m2 is due to the Chernobyl accident, whereas global fallout contributes 2.3 kBq/m2. Maximum values of total 137Cs contamination are nearly 200 kBq/m2. Total deposition of Chernobyl 137Cs on Austrian territory is 1.6 PBq or a fraction of around 2% of the 137Cs released from the reactor. 2115 measurements were used to draw the Austrian "caesium map". The geographical pattern of fallout distribution shows regional differences of contamination as high as 1:100.     

Improvements in modeling sagebrush concentrations of radioiodine released from the Hanford site

The Hanford Environmental Dose Reconstruction Project estimated the radiation dose to individuals from historical emissions of radioactive materials from the Hanford Site in Washington State. Project validation studies using predicted activity concentrations of 131I on sagebrush (Artemisia tridentata) showed a systematic underestimation against historical data during cold weather months, indicating a need for sagebrush model improvement. A deposition model for semi-volatile organic materials presented by Komp and McLachlen (Environ. Sci. Tech. 31 (1997) 886-890) is adapted here for gaseous iodine onto sagebrush. The deposition model includes a temperature-dependent term based on an integrated van't Hoff equation. Calibration data for the model are obtained from a release of 131I in 1963. Modeling results for releases in 1946 show a good match between historical data and predicted results using the new model. The new model shows improvement over interception-fraction type models, but requires plant-type-specific calibration data.     

Distributions of heavy metals in the surface sediments of the Gulf of Saros, NE Aegean Sea

The Gulf of Saros in the northeastern Aegean Sea (Turkey) is a relatively unpolluted marine environment. There is almost no industry and only small settlements in the surrounding region. The main sources of fresh water and sediment to the Gulf are the Meric River in the northwest and the Kavak Creek in the east. It has an asymmetric bathymetry with a 10-km-wide shelf to the north and up to 15-km-wide, 700-m-deep trough in the south. Water circulation in the Gulf is characterized by longshore currents and anticyclonic eddies. The Black Sea waters, leaving the Sea of Marmara through the Canakkale Strait, are known to enter the southern Gulf during the summer. The surface sediments on the northern shelf consist mainly of sand, whereas those on the slope and the deep trough are mainly silt and clay. The ranges of Fe, Mn, Cu, Zn, Pb, Ni, and Hg contents of the surface sediments from the Gulf of Saros are 0.25 4.60%, 114 1740 ppm, 6-44 ppm, 23-154 ppm, 2-80 ppm, 14-145 ppm, and 10-130 ppb, respectively. These values are low compared to those from the other neighboring marine environments, indicating the pristine nature of the Gulf in terms of metal pollution. However, most metal and organic carbon (Corg) distributions in the Gulf sediments show the effect of anthropogenic and natural inputs to the northwestern and eastern shelf areas from the Meric River and the Kavak Creek and to the deep trough from the Black Sea waters.     

Trace elements determination in lichens and in the airborne particular matter for the evaluation of the atmospheric pollution in a region of northern Italy

Lichens as biomonitors and neutron activation analysis as analytical technique have been employed to study the distribution of trace elements (TE) in a mountain region of north Italy (Biella) characterized by settlements of wool industry. Samples of airborne particulate matter collected onto filters, different species of lichens and samples of soils have been analyzed for the calculation of the enrichment factors (EFs) of more than 25 TE. By comparison of the corresponding EFs, the most suitable lichen species (Parmelia caperata) was selected as specific TE biomonitor of the area investigated. Samples of this lichen were collected and analyzed for the evaluation of the TE distribution in four different locations. The results obtained from the analysis of the lichens gave information about the predominant direction of pollutants transportation, while those related to the concentrations found in the air particulate allowed the evaluation of the degree of the local TE atmospheric pollution.     

Integrated measures for preservation, restoration and improvement of the environmental conditions of the Lagoon Olho d'Agua basin

The Lagoon Olho d'Agua in Pernambuco State, Northeast Brazil has received increasing environmental concern due to significant stress from pollution in the catchment. The existing environmental problems are the result of great pressure from a broad range of human activities, especially in the last 10 years. Serious pollution exists mainly from some industrial and urban activities, which increased intensively after the eighties. There is a strong social and economical pressure for housing and construction near the lagoon, due to the available land nearby beaches and estuarine zone, and recently by growing tourism activities. Uncontrolled land use by low-income communities and the pressure for construction by developers have led to landfilling and to deterioration of water quality in the lagoon catchment. Improvement of the environmental conditions in the catchment needs integrated measures. Guidelines and some specific actions involving several institutions have been established and refer to sanitation and urban infrastructure as the main priorities. A main target is the construction of low-cost sewage system with smaller and decentralised treatment plants.     

A GPS-based system for recording the flight paths of birds

 The GPS recorder consists of a GPS receiver board, a logging facility, an antenna, a power supply, a DC-DC converter and a casing. Currently, it has a weight of 33 g. The recorder works reliably with a sampling rate of 1/s and with an operation time of about 3 h, providing time-indexed data on geographic positions and ground speed. The data are downloaded when the animal is recaptured. Prototypes were tested on homing pigeons. The records of complete flight paths with surprising details illustrate the potential of this new method that can be used on a variety of medium-sized and large vertebrates. Received: 2 February 2000 / Accepted in revised form: 17 April 2000     

Atrazine induction of cytochrome P450 in Chironomus tentans larvae

Cytochrome P450-dependent aldrin epoxidation was characterized in third instar larvae of the aquatic midge, Chironomus tentans. Optimal in vitro assay conditions for the epoxidase were pH 7.6 and 31 degrees C. Activity was linear up to 40 min of incubation time and 0.5 mg microsomal protein per incubation. The activity was concentrated in the microsomal fraction of whole body homogenates and was NADPH-dependent. The effect of atrazine exposure on aldrin epoxidase was measured to determine if this herbicide induces cytochrome P450-dependent activity. Comparisons of control and atrazine-exposed midges indicated increased epoxidase activity as a result of atrazine exposure, and a 45 kDa protein of increased intensity was observed after SDS-PAGE of microsomal protein. The molecular weight of this protein was similar in size to cytochrome P450 enzymes reported for other insects. Heme staining of SDS-PAGE gels and immunochemical studies using a Drosophila melanogaster anti-P450 polyclonal antiserum, further support the cytochrome P450 nature of this inducible 45 kDa protein.     

Environmental epidemiology forward

Environmental epidemiology is the specialized aspect of public health science that studies human health risk from environmental hazards. It is rises largely upon a foundation of public health surveillance, and relies heavily upon analyses of data for small areas and sparse population groups. To a degree, environmental epidemiology is assigned the role of discerning very subtle human health impacts, or discerning early evidence of a tragic sequence. In that context, environmental epidemiology has a substantial public education and risk communication role. Environmental epidemiology will be greatly advanced as effective biological markers of exposure and precursor health effects are developed. At this point in time, statistical methods are in place to monitor population-level disease rates in high-risk populations for early risk identification and sentinel event recognition. Advances in geographic methods have provided a boon to the discipline by advantaging spatial studies. These advances in the discipline still need further refinement and pilot experiences. The inclusion of environmental epidemiological considerations with instances of proposed industrial expansion, hazardous waste management, and contamination remediation is heartily recommended.     

The history of mercury emissions from fuel combustion in Maritime Canada

In this study, we present an inventory of historical emissions of mercury resulting from combustion of wood, coal and refined petroleum products in Maritime Canada. The pattern of emissions illustrates the strong influences of population growth, industrial development and prevailing fuel preferences in the region. According to our calculations, anthropogenic mercury releases from fuel combustion in Maritime Canada have cumulatively totaled more than 50 tonnes since 1800. We have compiled both high and low estimates of annual mercury releases in this region. Mercury emissions from fuel combustion in Maritime Canada reached a maximum level in the 1940s. At this time, emissions were between 778 (low) and 1494 (high) kg per year, coinciding with the period of most intensive coal use in Maritime Canada. In 1995, emissions were approximately 54% of the level reached in 1940, at 427 (low)-800 (high) kg per year. In presenting this emissions inventory, we hope to refine past estimates with current information on the mercury content of different fuel types, and create a comprehensive database on how mercury emissions from various sources have changed over time.