Biogenic cements from rice hull ash doped with aluminum and iron

This work describes the use of rice hull as starting material for the synthesis of cements doped with iron and aluminum. Rice hull contains about 10-20% of silica along with organic material. In many countries rice hull represents an environmental problem since this material is merely burned at rice fields, rendering suspended silica particles in the air. Dicalcium silicate (beta-Ca(2)SiO(4)) is the second most important component of Portland cement and presents many environmental advantages over commercial cement. It can be prepared at lower temperatures saving energy and raw-materials. In this work we describe the synthesis beta-Ca(2)SiO(4) using silica derived from rice hull ash. Silica was obtained from heating rice hull at 600 degrees C. Starting materials (silica, calcium oxide, barium chloride, iron or aluminum oxide) were weighed in stoichiometric proportions and aqueous dispersions having water:solid ratio of approximately 20:1 were prepared and treated in an ultrasonic bath for 60min. After this, an intermediate silicate and the excess of calcium hydroxide were obtained. Finally solids were dried, grounded and heated up to 800 degrees C. It was observed that beta-Ca(2)SiO(4) was obtained when dopant concentration was limited to 1%.     

Bioaccumulation of chlorinated pesticides and PCBs in the tropical freshwater fish Hoplias malabaricus: histopathological, physiological, and immunological findings

For assessing the impact of chlorinated compounds, such as organochlorine pesticides, polychlorinated biphenyls, chlorotriazines (atrazine, simazine), and chlorinated phenylureas (diuron), on the Ponta Grossa lake South of Brazil, ten freshwater trahira fish (Hoplias malabaricus) were collected in October 2005. The contamination status was evaluated by the energy budget and various histopathological markers. The results showed detectable amounts of persistent organic pollutants (POPs) in the liver and muscle; the bioaccumulation was higher in the liver than in the muscle. The presence of some banned pesticides, such as hexachlorobenzene and dichlorodiphenyltrichloroethane, in the liver suggests an acute exposure to these compounds. Some physiological disturbances and morphological damages found in the liver of H. malabaricus were associated with chlorinated-compound bioaccumulation. The most important alterations in the liver were lesions such as fibrosis, large necrosis area, leukocyte infiltration, and the absence of melanomacrophages (MM). Individuals containing higher concentrations of pesticides, such as aldrin, alachlor, and dichloroaniline (a metabolite of diuron), showed the nonoccurrence of MM in the liver. These data suggest an immunosuppression in the individuals from Ponta Grossa Lake after exposure to POPs. According to the present data, the POPs found in the studied site are bioavailable, induce severe damages in target organs such as the liver, and can disturb the immune system of the trahira. This is the first study of POPs in the Paraná state, and one among the few studies in the south of Brazil. The present data suggest and motivate further chemical and biomonitoring studies in freshwater ecosystems in the south of Brazil.     

Loss of Plant Biodiversity Over a Seven-Year Period in Two Constructed Wetlands in Central New York

Since wetland construction projects are becoming more commonplace, meaningful follow-up studies are needed to evaluate how these systems change over time. To that end, the objective of our study was to examine the temporal changes in plant community composition and water chemistry in two constructed wetlands. We investigated two wetland sites that were constructed in 2003 in northern Otsego County, NY, a county that is largely dominated by agriculture. Site 1 was previously an active cow pasture and site 2 was previously a wet meadow surrounded by agricultural fields. No active plant introduction was made during the construction; however, both sites were located in areas with many remnant wetlands and were connected to through-flowing streams. In 2004 (Year 1) and 2010 (Year 7), the plant community composition and nitrogen retention were assessed. We found that both sites experienced site-wide declines in plant species richness, including the loss of upland and facultative upland species and the unanticipated loss of facultative wetland and some obligate species. We propose that high water levels, which, at their maximum depth were >1.5 m deeper than in Year 1, maintained by landowners in the years after the initial survey, may have been responsible for the unexpected loss of wetland species. We also found that site 1 exhibited considerable nitrogen retention in both Year 1 and Year 7; however, N concentrations were low at site 2 in both years.     

A case study: An explosion in a milk spray dryer,CAPSA, NW Spain

European Standard EN 14491 (2006): “Dust explosion venting protective systems”, based on German Standard VDI 3673 (2002): “Pressure venting of dust explosions”, Verein Deustcher Ingenieure, specifies the basic design requirements for the selection of dust explosion venting protection systems.In this study an investigation into the efficiency of venting surfaces in accordance with Standard EN 14491 has been undertaken to check the validation of the same. Thus, the application of the standard to an actual case of an explosion in a milk spray dryer has been studied, taking into consideration the explosive characteristics of products treated in this type of installation and their venting requirements.The results obtained indicate that, in specific situations – such as the effects of turbulence, particularly in the cone, or dust layer self-ignition – the European Standard could underestimate the venting surface requirements needed to alleviate possible excess internal pressure in order to avoid injury or structural damage to spray dryers.     

Comparative study of the methodologies based on Standard UNE 60079/10/1 and computational fluid dynamics (CFD) to determine zonal reach of gas-generated Atex explosive atmospheres

This study presents two methodologies which can be used to determine the classification and extended area of hazardous zones caused by gas, vapours and mists. The first is based on UNE 60079/10/1: Electrical apparatus for explosive gas atmospheres – Part 10: Classification of hazardous areas, whilst the second is developed on the basis of Computational Fluid Dynamics (CFD) using the FLUENT software application. Both methodologies were applied in the same case study of differing leakage components from a dairy farm steam boiler room fuelled by liquid natural gas (LNG).The results obtained show that CFD methodology is a powerful tool with a significant capacity for determining the size of an explosive atmosphere for a broad range of exhaust sources. This methodology offers more conservative results than those obtained from the analytical methodology recommended in Standard UNE 60079/10/1. Results obtained using CFD are more useful in enabling the study of turbulence phenomena, boundaries, and diverse initial and contour conditions.In contrast, the Standard UNE 60079/10/1 methodology is less conservative and aims at determining the hypothetical volume V_z of the explosive atmosphere. This volume is a measurement of the ventilation efficiency which is in turn proportional to a massive gas release through an exhaust source divided by the number of air changes in the enclosed area.From the results obtained, it can be confirmed that Standard UNE 60079/10/1 should be revised.     

Sonographically determined anomalies and outcome in 170 chromosomally abnormal fetuses

Structural pathology and outcome were studied in 170 chromosomally abnormal fetuses. Numerical chromosomal abnormalities were established in 158 (93 per cent) cases, of which 110 (71 per cent) represented trisomies, 30 (18 per cent) Turner syndrome, and 18 (11 per cent) triploidy. Structural chromosomal abnormalities were diagnosed in 12 (7 per cent) cases. Gestational age at referral was significantly shorter for pregnancies with Turner syndrome than for the other chromosomal abnormalities. Referral before 20 weeks of gestation was mainly based on fetal structural pathology alone (92 per cent); after 20 weeks, patients were referred because of structural pathology combined with small for gestational age, oligohydramnios, or polyhydramnios. Referral as a result of suspected multiple organ pathology occurred in 73.5 per cent of pregnancies. An abnormal amniotic fluid volume was present in 59/170 (34.5 per cent) chromosomally affected pregnancies, i.e., oligohydramnios in 31 and polyhydramnios in 28 cases. Birth weight was below the tenth percentile in over half of the chromosomally abnormal fetuses, except for Turnersyndrome. Fetal outcome was poor, with a survival rate at 1 month of 30 per cent for trisomies which was mainly determined by trisomy 21 (14/18=77.5 per cent).     

Study of the saltwater pond at Capoterra,southern Sardinia: General characteristics

Capoterra Pond in southern Sardinia is described and analyzed with respect to its morphological, meteorological, physical and chemical characteristics, and its zoobenthic, zooplankton, and phytoplankton biocenoses. The birdlife, flora, and riparian associations of vegetation are studied in order to draw international attention to the importance of this lagoon, the precariousness of its ecosystem, the seriousness of current attempts to destabilize it, and the need to encourage the Sardinian authorities to initiate conservation measures, especially as rare birds have found their niches there.     

Oxidative degradation of 2,4-xylidine by photosensitization with 2,4,6-triphenylpyrylium: homogeneous and heterogeneous catalysis

The possibility of using zeolites containing the 2,4,6-triphenylpyrylium cation as photocatalysts for the degradation of pollutants has been tested on aqueous xylidine (2,4-dimethylaniline) solutions as models for contaminated wastewaters. The influence of the photocatalyst and substrate concentrations on xylidine oxidation has been investigated in homogeneous solution, by performing a series of experiments chosen according to the experimental design methodology (Doehlert uniform array). The empirical models and the corresponding response surfaces obtained from data analysis have been used for simulating and predicting degradation efficiency. The results have shown that conversion increases with increasing amounts of photocatalyst and decreasing concentration of the model pollutant. The fluorescence of 2,4,6-triphenylpyrylium was quenched by xylidine with a rate constant k(q) of 3.1x10(9)M(-1)s(-1). This result suggests a direct electron transfer between the excited pyrylium salt and xylidine. Because of the limited stability of the photocatalyst in homogeneous media, a pyrylium containing Y-zeolite has been tested for the photocatalytic oxidation of xylidine under heterogeneous conditions. The results suggest that the supported catalyst has a much improved stability and that xylidine oxidation rates remain nearly constant during the whole reaction time. An additional advantage of the pyrylium containing zeolite photocatalyst is that it can be recycled and used for further experiments.     

Use of ozone and/or UV in the treatment of effluents from board paper industry

The aim of this work has been to study the viability of ozone and/or UV in the treatment of cardboard industry effluents. Several model compounds have been chosen for the experiments: guaicol, eugenol, glucose, acetate and butyrate. Significant differences in the ozonisation rates are observed between phenolic products coming from lignin (eugenol and guaiacol) and aliphatic compounds. Reactions fit in all cases a pseudo-first order kinetics and are influenced by the pH of the solution. Real effluents have also been tested, and the COD decrease has been found to depend on the fatty acids/phenols ratio. Finally, respirometric studies have shown an increase in the BODst in effluents subjected to a mild oxidation, while under stronger conditions a BODst decrease is observed.     

Mentoring with(in) care: A co‐constructed auto‐ethnography of mutual learning

Research into workplace mentoring is principally focussed on predictors and psychosocial and instrumental outcomes, while there is scarcely any in‐depth research into relational characteristics, outcomes and processes. This article aims to illustrate these relational aspects. It reports a co‐constructed auto‐ethnography of a dyadic mentoring relationship as experienced by mentor and protégé. The co‐constructed narrative illustrates that attentiveness towards each other and a caring attitude, alongside learning‐focussed values, promote a high‐quality mentoring relationship. This relationship is characterised, among other things, by person centredness, care, trust and mutual influence, thereby offering a situation in which mutual learning and growth can occur. Learning develops through and in relation and is enhanced when both planned and unplanned learning takes place. In addition, the narrative makes clear that learning and growth of both those involved are intertwined and interdependent and that mutual learning and growth enrich and strengthen the relationship. It is concluded that the narrative illustrates a number of complex relational processes that are difficult to elucidate in quantitative studies and theoretical constructs. It offers deeper insight into the initiation and improvement of high‐quality mentoring relationships and emphasises the importance of further research into relational processes in mentoring relationships. Copyright © 2015 John Wiley & Sons, Ltd.