Copper recovery from aqueous solution by a modified industrial polymer

The use of a new material (MFPAN) for copper remotion from aqueous solution is reported. An industrial fibber polymer (FPAN) was modified by 1,3-dipolar cycloaddition to include tetrazole moieties, as pendant groups. A minimum ratio Cu/MPFAN is required to enable precipitation, suggesting a pseudo stoichiometry. Both polymer and metal can be quantitatively recovered from the precipitate by acidification. This recovery ensures a recyclable use of this new material.     

Assessing the organic composition of urban surface films using nuclear magnetic resonance spectroscopy

Recently it has been shown that urban surfaces are covered with a thin film which mediates the fate, distribution and accumulation of semi-volatile organic compounds in the environment. In this study we apply a combination of solution, semi-solids, and solid state nuclear magnetic resonance (NMR) methods to provide a general overview of the organic constituents. In surface film collected from 30 m2 of outside windows over an area of 12 km2 in downtown Toronto, we roughly estimate that the organic carbon is approximately 35% carbohydrate, approximately 35% aliphatics, approximately 20% aromatics, and approximately 10% carbonyl groups. Various aliphatic groups can be identified including a number of acids, alcohols, alkanes, and alkenes. Also, numerous intact aliphatic esters are apparent that have not been observed before, as well as carbohydrates. The aromatic species include a small portion that appears to be derived from a polymer of styrene, in addition a larger fraction is consistent with polyhydroxylated PAH derived material, although this assignment is tentative and based solely on 1-D NMR data only. In addition, signals from polybutadiene are present and while accurate quantification is not possible, it appears that this polymer may be up to a few percents by weight of the total organic material.     

Effect of heavy metals on the production of several laccase isoenzymes by Trametes versicolor and on their ability to decolourise dyes

The white-rot fungus Trametes versicolor growing in submerged culture on a basal medium, with barley bran as a carbon source, produced two laccase isoenzymes LacI and LacII. The addition of metal ions to the culture medium was performed to improve the total laccase activity and to determine the effect on the production of laccase isoenzymes. From all the tested metals, only Cu2+ increased laccase activity (up to 12-fold with respect to control cultures) and T. versicolor in presence of all metals produced the two isoenzymes in different proportion with ratios of activity (LacI/LacII) varying between 0.11 and 0.51. This factor played an important role in the decolourisation of the textile dye Indigo Carmine.     

Multistate modeling of habitat dynamics: factors affecting Florida scrub transition probabilities

Many ecosystems are influenced by disturbances that create specific successional states and habitat structures that species need to persist. Estimating transition probabilities between habitat states and modeling the factors that influence such transitions have many applications for investigating and managing disturbance-prone ecosystems. We identify the correspondence between multistate capture-recapture models and Markov models of habitat dynamics. We exploit this correspondence by fitting and comparing competing models of different ecological covariates affecting habitat transition probabilities in Florida scrub and flatwoods, a habitat important to many unique plants and animals. We subdivided a large scrub and flatwoods ecosystem along central Florida's Atlantic coast into 10-ha grid cells, which approximated average territory size of the threatened Florida Scrub-Jay (Aphelocoma coerulescens), a management indicator species. We used 1.0-m resolution aerial imagery for 1994, 1999, and 2004 to classify grid cells into four habitat quality states that were directly related to Florida Scrub-Jay source-sink dynamics and management decision making. Results showed that static site features related to fire propagation (vegetation type, edges) and temporally varying disturbances (fires, mechanical cutting) best explained transition probabilities. Results indicated that much of the scrub and flatwoods ecosystem was resistant to moving from a degraded state to a desired state without mechanical cutting, an expensive restoration tool. We used habitat models parameterized with the estimated transition probabilities to investigate the consequences of alternative management scenarios on future habitat dynamics. We recommend this multistate modeling approach as being broadly applicable for studying ecosystem, land cover, or habitat dynamics. The approach provides maximum-likelihood estimates of transition parameters, including precision measures, and can be used to assess evidence among competing ecological models that describe system dynamics.     

The STRATEGY project: decision tools to aid sustainable restoration and long-term management of contaminated agricultural ecosystems

The STRATEGY project (Sustainable Restoration and Long-Term Management of Contaminated Rural, Urban and Industrial Ecosystems) aimed to provide a holistic decision framework for the selection of optimal restoration strategies for the long-term sustainable management of contaminated areas in Western Europe. A critical evaluation was carried out of countermeasures and waste disposal options, from which compendia of state-of-the-art restoration methods were compiled. A decision support system capable of optimising spatially varying restoration strategies, that considered the level of averted dose, costs (including those of waste disposal) and environmental side effects was developed. Appropriate methods of estimating indirect costs associated with side effects and of communicating with stakeholders were identified. The importance of stakeholder consultation at a local level and of ensuring that any response is site and scenario specific were emphasised. A value matrix approach was suggested as a method of addressing social and ethical issues within the decision-making process, and was designed to be compatible with both the countermeasure compendia and the decision support system. The applicability and usefulness of STRATEGY outputs for food production systems in the medium to long term is assessed.     

National and regional trends in ambient ozone measurements, 1975–1981

Long-term (1975–1981) and short-term (1980–1981) national and regional trends in ozone (O₃) are examined. The data used in this paper come from the U.S. Environmental Protection Agency's National Aerometric Data Bank (NADB). Air quality trends are presented for both the National Air Monitoring Sites (NAMS) and all other sites meeting the historical and data completeness criteria. Nationally, the composite average of the second-highest daily maximum 1-h O₃ values recorded at 209 sites decreased 14% between 1975 and 1981. An even greater improvement was observed in the estimated number of exceedances in the ozone season (July–September), which decreased 42%. Volatile organic compound (VOC) emissions decreased 9% during the same time period. The greater improvement observed in ozone levels appears to be a combination of reductions in VOC emissions and the change in the calibration procedure which took place between 1978 and 1979. Between 1980 and 1981, the majority of the 159 monitoring sites with data in both years decreased with a median rate of improvement of 8%. This is consistent with the 7% drop in VOC emissions during this period.     

Buoyancy and turbulence-driven atmospheric circulation over urban areas

In the buoyancy and turbulence-driven atmospheric circulations (BTDAC) that occur over urban areas where the approach means wind speeds are very low (less than turbulent fluctuations and typically < 3 m/sec), the surface temperatures are significantly higher than those in the external rural areas, and the atmosphere above the mixing layer is stably stratified. In this paper, the mechanisms of BTDAC formation are studied through laboratory experiments and modelling, with additional low-level inflow from external rural areas and a divergent outflow in the opposite direction in the upper part of the mixed layer. Strong turbulent plumes in the central region mix the flow between lower and higher levels up to the inversion height. There are shear-driven turbulent eddies and weaker buoyant plumes around the periphery of the urban area. As the approach flow is very weak, the recirculating streamlines within the dome restrict the ventilation, and the dispersion of pollution emitted from sources below the inversion height leading to a rise in the mean concentration. Low-level air entrained from rural areas can, however, improve ventilation and lower this concentration. This trend can also be improved if the recirculating structure of the BTDAC flow pattern over urban areas breaks down as a result of the surface temperature distribution not being symmetrical, or as the approach wind speed increases to a level comparable with the mean velocity of circulation, or (except near the equator) the urban area is large enough that the Coriolis acceleration is significant.     

Use of coupling agents to stabilize asphalt–rubber–gravel composite to improve its mechanical properties

The mechanical performance of rubber-modified asphalt roads depends, besides the intrinsic properties of the constituents (asphalt, rubber and gravel), on their interfaces. To improve the adhesion between constituents, two different coupling agents were required: one to link asphalt with the rubber particles to stabilize the composite creating an elastic network in the interior of the material to improve its elastic recovery, and other to increase the adhesion between the hydrophobic asphalt and the hydrophilic gravel. A phenolic resin was used to link the rubber particles with the asphalt, while a switterionic molecule (phosphatidyl-choline) was used to change the OH groups on the gravel surface by hydrocarbon chains to make it compatible with the asphalt.     

Behavioral genomics of honeybee foraging and nest defense

The honeybee has been the most important insect species for study of social behavior. The recently released draft genomic sequence for the bee will accelerate honeybee behavioral genetics. Although we lack sufficient tools to manipulate this genome easily, quantitative trait loci (QTLs) that influence natural variation in behavior have been identified and tested for their effects on correlated behavioral traits. We review what is known about the genetics and physiology of two behavioral traits in honeybees, foraging specialization (pollen versus nectar), and defensive behavior, and present evidence that map-based cloning of genes is more feasible in the bee than in other metazoans. We also present bioinformatic analyses of candidate genes within QTL confidence intervals (CIs). The high recombination rate of the bee made it possible to narrow the search to regions containing only 17–61 predicted peptides for each QTL, although CIs covered large genetic distances. Knowledge of correlated behavioral traits, comparative bioinformatics, and expression assays facilitated evaluation of candidate genes. An overrepresentation of genes involved in ovarian development and insulin-like signaling components within pollen foraging QTL regions suggests that an ancestral reproductive gene network was co-opted during the evolution of foraging specialization. The major QTL influencing defensive/aggressive behavior contains orthologs of genes involved in central nervous system activity and neurogenesis. Candidates at the other two defensive-behavior QTLs include modulators of sensory signaling (Am5HT ₇ serotonin receptor, AmArr4 arrestin, and GABA-B-R1 receptor). These studies are the first step in linking natural variation in honeybee social behavior to the identification of underlying genes.