Constructing genuine savings indicators for Ireland, 1995-2005

In this paper we compute the genuine savings indicators for the Republic of Ireland over the period 1995-2005. We expand and improve existing World Bank's estimates by: a) using data collected from official Irish sources; b) employing the net present value method to assess resource depreciation; c) including external costs from SO(2) and NOx emissions; and d) estimating human capital accumulation using the returns to education. We also perform a sensitivity analysis to check the robustness of our estimates to different assumptions and parameters. Our estimates are consistently smaller than the World Bank's and negative in the first years of the period considered.     

Cross-correlation between the controlled collision environment and real-world motor vehicle collisions: Evaluating the protection of the thoracic side airbag

Objective: Thoracic side airbags (tSABs) were integrated into the vehicle fleet to attenuate and distribute forces on the occupant's chest and abdomen, dissipate the impact energy, and move the occupant away from the intruding structure, all of which reduce the risk of injury. This research piece investigates and evaluates the safety performance of the airbag unit by cross-correlating data from a controlled collision environment with field data.

Method: We focus exclusively on vehicle–vehicle lateral impacts from the NHTSA's Vehicle Crash Test Database and NASS-CDS database, which are replicated in the controlled environment by the (crabbed) barrier impact. Similar collisions with and without seat-embedded tSABs are matched to each other and the injury risks are compared.

Results: Results indicated that dummy-based thoracic injury metrics were significantly lower with tSAB exposure (P <.001). Yet, when the controlled collision environment data were cross-correlated with NASS-CDS collisions, deployment of the tSAB indicated no association with thoracic injury (tho. MAIS 2+ unadjusted relative risk [RR] = 1.14; 90% confidence interval [CI], 0.80–1.62; tho. MAIS 3+ unadjusted RR = 1.12; 90% CI, 0.76–1.65).

Conclusion: The data from the controlled collision environment indicated an unequivocal benefit provided by the thoracic side airbag for the crash dummy; however, the real-world collisions demonstrate that no benefit is provided to the occupant. This has resulted from a noncorrelation between the crash test/dummy-based design taking the abstracting process too far to represent the real-world collision scenario.     

The life cycle of rice: LCA of alternative agri-food chain management systems in Vercelli (Italy)

The Vercelli rice district in northern Italy plays a key role in the agri-food industry in a country which accounts for more than 50% of the EU rice production and exports roughly 70%. However, although wealth and jobs are created, the sector is said to be responsible for environmental impacts that are increasingly being perceived as topical. As a complex and comprehensive environmental evaluation is necessary to understand and manage the environmental impact of the agri-food chain, the Life Cycle Assessment (LCA) methodology has been applied to the rice production system: from the paddy field to the supermarket. The LCA has pointed out the magnitude of impact per kg of delivered white milled rice: a CO_2eq emission of 2.9 kg, a primary energy consumption of 17.8 MJ and the use of 4.9 m³ of water for irrigation purposes. Improvement scenarios have been analysed considering alternative rice farming and food processing methods, such as organic and upland farming, as well as parboiling. The research has shown that organic and upland farming have the potential to decrease the impact per unit of cultivated area. However, due to the lower grain yields, the environmental benefits per kg of the final products are greatly reduced in the case of upland rice production and almost cancelled for organic rice. LCA has proved to be an effective tool for understanding the eco-profile of Italian rice and should be used for transparent and credible communication between suppliers and their customers.     

Developing spatially stratified N(2)O emission factors for Europe

We investigate the possibility to replace the – so-called – Tier 1 IPCC approach to estimate soil N₂O emissions with stratified emissions factors that take into account both N-input and the spatial variability of the environmental conditions within the countries of the European Union, using the DNDC-Europe model. Spatial variability in model simulations is high and corresponds to the variability reported in literature for field data. Our results indicate that (a) much of the observed variability in N₂O fluxes reflects the response of soils to external conditions, (b) it is likely that national inventories tend to overestimate the uncertainties in their estimated direct N₂O emissions from arable soils; (c) on average over Europe, the fertilizer-induced emissions (FIE) coincide with the IPCC factors, but they display large spatial variations. Therefore, at scales of individual countries or smaller, a stratified approach considering fertilizer type, soil characteristics and climatic parameters is preferable.     

Application of Brassica napus hairy root cultures for phenol removal from aqueous solutions

Phenolic compounds present in the drainage from several industries are harmful pollutants and represent a potential danger to human health. In this work we have studied the removal of phenol from water using Brassica napus hairy roots as a source of enzymes, such as peroxidases, which were able to oxidise phenol. These hairy roots were investigated for their tolerance to highly toxic concentrations of phenol and for the involvement of their peroxidase isoenzymes in the removal of phenol. Roots grew normally in medium containing phenol in concentrations not exceeding 100 mg l(-1), without the addition of H(2)O(2). However, roots were able to remove phenol concentrations up to 500 mg l(-1), in the presence of H(2)O(2), reaching high removal efficiency, within 1h of treatment and over a wide range of pH (4-9). Hairy roots could be re-used, at least, for three to four consecutive cycles. Peroxidase activity gradually decreased to approximately 20% of the control, at the fifth cycle. Basic and near neutral isoenzymes (BNP) decreased along time of recycling while acidic isoenzymes (AP) remained without changes. Although both group of isoenzymes would be involved in phenol removal, AP showed higher affinity and catalytic efficiency for phenol as substrate than BNP. In addition, AP retained more activity than BNP after phenol treatment. Thus, AP appears to be a promising isoenzyme for phenol removal and for application in continuous treatments. Furthermore, enzyme isolation might not be necessary and the entire hairy roots, might constitute less expensive enzymatic systems for decontamination processes.     

Occurrence and source of brominated organic compounds in surface waters

Monitoring of organic halogen compounds, measured as adsorbable organically bound bromine (AOBr), in an eutrophic lake, which is influenced by treated waste water, revealed repeatedly high concentrations of organobromine compounds in late summer, whereas five times lower values were measured during the rest of the year. It was possible to reproduce the in situ observed AOBr increase in the laboratory. Batch experiments were performed with lake water from two different lakes and an algae culture. It could be shown that the AOBr production is not limited to strong waste water influenced lakes. Furthermore, the AOBr formation requires light and the presence of algae, and thus is most probably biotic in nature. A low content of nutrients favours the formation of organic bromine compounds. To our knowledge this is the first report about the seasonally occurrence of naturally produced organic bromine compounds in lakes/surface waters.     

A comparison of relative abundance versus class data in diatom-based quantitative reconstructions

Relative species abundances are the most frequently applied data type used for modern or paleolimnological diatom studies. In contrast, plant ecologists save time by commonly using ordinal scale data (class data), where the abundance of a species is estimated using dominance classes, instead of relative abundance data. This study compares the performance of models based on ordinal diatom species class data (class 1: sporadic (<0–1%) up to class 6: dominant (>60%)) with similar model types based on relative abundance data for different regional training sets and sediment cores. First, relative diatom abundances were converted into ordinal classes. Species response to total phosphorous (TP) was modelled using both types of data - relative abundance and ordinal class data. Secondly, TP was reconstructed for six sediment cores from North-East Germany, Switzerland, and Denmark using WA and WA-PLS based on both types of data. Thirdly, 20 lake sediment surface samples with known relative diatom abundances and known water TP concentrations were recounted using an ordinal data scale to create an independent test set. No significant differences were found between relative abundance and class data for (1) explained species variance, (2) reconstructed TP values, and (3) inferred TP values of the 20 recounted samples. This approach demonstrates that past TP concentrations may also be reliably reconstructed using class data instead of relative diatom abundances. Thus, by using class data lake managers may not only obtain more long-term records past water quality, but this approach is also quicker and therefore more cost effective. Moreover, the findings of this study may also advance the use of automatic diatom identification with digital image recognition, as we demonstrate that not every damaged diatom valve needs to be identified.     

Twin-roll casting of aluminum–steel clad strips

The results of experiments on twin-roll casting of aluminum–steel clad strips are presented. For the first time this energy-saving production technology for a clad material of this metals combination was implemented. Besides the experimental equipment and processing details, the results of metallographic, electron microprobe and transmission electron microscopy analysis of the aluminum–steel interface are shown. The pack rolling and deep-drawing tests of the twin-roll cast clad strips were performed to check their applicability for a further processing using plastic deformation. In addition adhesive strength of the bond was tested. The performed analysis have shown the formation of a continuous, thin and uniform layer of intermetallic phases on the materials interface of approx. 3 μm thickness having an adhesive strength over 70 MPa.     

Participatory approach, acceptability and transparency of waste management LCAs: case studies of Torino and Cuneo

The paper summarises the main results obtained from two extensive applications of Life Cycle Assessment (LCA) to the integrated municipal solid waste management systems of Torino and Cuneo Districts in northern Italy. Scenarios with substantial differences in terms of amount of waste, percentage of separate collection and options for the disposal of residual waste are used to discuss the credibility and acceptability of the LCA results, which are adversely affected by the large influence of methodological assumptions and the local socio-economic constraints. The use of site-specific data on full scale waste treatment facilities and the adoption of a participatory approach for the definition of the most sensible LCA assumptions are used to assist local public administrators and stakeholders showing them that LCA can be operational to waste management at local scale.     

Detection of the toughest: Pedestrian injury risk as a smooth function of age

Objective: Though it is common to refer to age-specific groups (e.g., children, adults, elderly), smooth trends conditional on age are mainly ignored in the literature. The present study examines the pedestrian injury risk in full-frontal pedestrian-to–passenger car accidents and incorporates age—in addition to collision speed and injury severity—as a plug-in parameter.

Methods: Recent work introduced a model for pedestrian injury risk functions using explicit formulae with easily interpretable model parameters. This model is expanded by pedestrian age as another model parameter. Using the German In-Depth Accident Study (GIDAS) to obtain age-specific risk proportions, the model parameters are fitted to the raw data and then smoothed by broken-line regression.

Results: The approach supplies explicit probabilities for pedestrian injury risk conditional on pedestrian age, collision speed, and injury severity under investigation. All results yield consistency to each other in the sense that risks for more severe injuries are less probable than those for less severe injuries. As a side product, the approach indicates specific ages at which the risk behavior fundamentally changes. These threshold values can be interpreted as the most robust ages for pedestrians.

Conclusions: The obtained age-wise risk functions can be aggregated and adapted to any population. The presented approach is formulated in such general terms that in can be directly used for other data sets or additional parameters; for example, the pedestrian's sex. Thus far, no other study using age as a plug-in parameter can be found.