Sustainability of agricultural and wild cereals to aerotechnogenic exposure

In recent decades, the problem of the constantly increasin level of anthropogenic load on the environment is becoming more and more acute. Some of the most dangerous pollutants entering the environment from industrial emissions are heavy metals. These pollutants are not susceptible to biodegradation over time, which leads to their accumulation in the environment in dangerous concentrations. The purpose of this work is to study the sustainability of cultivated and wild plants of the Poaceae family to aerotechnogenic pollution in the soil. The content of heavy metals in couch grass (Elytrigia repens (L.) Nevski), meadow bluegrass (Poa pratensis L.) and soft wheat (Triticum aestivum) plants grown in the impact zone of Novocherkassk Power Station has been analyzed. Contamination of cultivated and wild cereals with Pb, Zn, Ni and Cd has been established. It has been shown that the accumulation of heavy metals is individual for each plant species. An average and close correlation have been established between the total HM content and the content of their mobile forms in the soil and their content in plants. For the plants studied, the translocation factor (TF) and the distribution coefficient (DC) of HM have been calculated. The TF is formed by the ratio of the concentration of an element in the root plant dry weight to the content of its mobile compounds in the soil. The DC value makes it possible to estimate the capacity of the aboveground parts of plants to absorb and accumulate elements under soil pollution conditions and is determined as the ratio of the metal content in the aboveground biomass to its concentration in the roots. TF and DC values have shown a significant accumulation of elements by plants from the soil, as well as their translocation from the root system to the aboveground part. It has been revealed that even within the same Poaceae family, cultural species are more sensitive to man-made pollution than wild-growing ones.

     

Photodegradation of the herbicide goal

Photodegradation products of the herbicide Goal active ingredient were obtained with a xenon lamp and analyzed using direct inlet mass spectrometry, MS/MS and GC/MS. A number of products were identified and their generation pathways were established to be mainly Ar—O bond cleavage, dechlorination and photocyclisation. The latter process gives chlorinated and unchlorinated dibenzofurans some of which may be toxic.     

Cross-fostering mismatches parent-offspring behaviors but this does not entail costs to family life

Early family life is characterized by a close interaction between parents and their offspring. This needs to be disentangled when studying the ontogeny and evolution of a given behavior—e.g. via cross-fostering. But cross-fostering may change the expression of parent and offspring behaviors as they may respond to the novel environment. Furthermore, parent and offspring traits are potentially co-adjusted and cross-fostering may, therefore, introduce a costly mismatch. To study such consequences of cross-fostering, we created an experimental group (EG) of broods raised by foster parents from day 3 onwards and a control group of broods raised by their biological parents throughout. We tested offspring begging intensity in all broods and the provisioning of the EG-parents only, both on day 3 just before cross-fostering and then again on day 5. Costs were estimated in terms of growth and survival (offspring costs) and mass of a second clutch (parental costs). Offspring begging intensity varied with age, but this change was neither affected by cross-fostering per se nor by small-scale differences in parental provisioning between biological and foster parents. Similarly, the change in parental provisioning with offspring age among the EG-parents was not affected by the difference in begging between biological and foster nestlings. This lack in behavioral plasticity in response to cross-fostering did not entail costs to neither of the parties. Our results suggest a rather predetermined pattern of behavioral expression, which may be shaped by limits and costs to plasticity and/or an (apparent) lack of costs of a behavioral mismatch.     

Effects of benzo[a]pyrene toxicity on morphology and ultrastructure of Hordeum sativum

Many studies have been devoted to investigation of toxic benzo(a)pyrene (BaP) compound, but studies involving changes at the cellular level are insufficient to understand the mechanisms of polycyclic aromatic hydrocarbons (PAHs) effect on plants. To study the toxicity of BaP, a model vegetation experiment was conducted on cultivation of spring barley (Hordeum sativum distichum) on artificially polluted BaP soil at different concentrations. The article discusses the intake of BaP from the soil into the plant and its effect on the organismic and cellular levels of plant organization. The BaP content in the organs of spring barley was determined by the method of saponification. With an increase in the concentration of BaP in the soil, its content in plants also rises, which leads to inhibition of growth processes. The BaP content in the green part of Hordeum sativum increased from 0.3 µg kg^?1 in control soil up to 2.6 µg kg^?1 and 16.8 µg kg^?1 under 20 and 400 ng/g BaP applying in soil, as well as in roots: 0.9 µg kg^?1, 7.7 µg kg^?1, 42.8 µg kg^?1, respectively. Using light and electron microscopy, changes in the tissues and cells of plants were found and it was established that accumulation of BaP in plant tissues caused varying degrees of ultrastructural damage depending on the concentration of pollutant. BaP had the greatest effect on the root, significant changes were found in it both at histological and cytological levels, while changes in the leaves were observed only at the cytological level. The results provide significant information about the mechanism of action of BaP on agricultural plants.

     

The toxic effect of CuO of different dispersion degrees on the structure and ultrastructure of spring barley cells (Hordeum sativum distichum)

Environmental Geochemistry and Health - Nowadays, nanotechnology is one of the most dynamically developing and most promising technologies. However, the safety issues of using metal nanoparticles,...     

On wear resistance of tool steel

Maintaining a reasonably low cutting tool wear when producing forming tools is a general challenge in the development of new forming tool materials. The tool life of a hot forming tool steel (H13) has been significantly improved by reducing its Si-content from 1.0 to 0.06 wt.%. However, this modified H13 (MH13) also displays a reduced cutting tool life due to higher cutting forces and a stronger tendency to form built up layers (BUE) on the cutting edge. This paper explains why.Gleeble tests of MH13 revealed a significantly higher flow stress in the 820–900 °C temperature interval in MH13 compared to H13. Thermo-Calc simulations showed that when reducing the Si-content from 1.0 to 0.06 wt.% the initial temperature for ferrite-to-austenite transformation (A1) was reduced from 900 °C to 820 °C. Knowing that austenite has totally different mechanical and thermal properties than ferrite, the difference in A1 between the two steels explains the higher cutting forces and higher tendency for BUE-formation. The conclusion is that the difference in machinability between H13 and MH13 is primarily related to their difference in A1.An attempt was also made to find a new tool material composition that can combine the wear resistance of MH13 and the good machinability of H13. Thermo-Calc simulations were performed with slightly modified alloying content without changing its properties as a good forming tool material, with the aim to increase A1. For instance, reducing the Mn content from 0.5 to 0.05 wt.% proved to increase A1 from 820 to 850 °C.     

A pilot study on the determination of perfluorooctanesulfonate and other perfluorinated compounds in blood of Canadians

A pilot study was conducted to provide preliminary data on the concentrations of perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorooctanesulfonamide (PFOSA) in the blood of Canadians. A set of 56 human serum samples was collected from non-occupationally exposed Canadians and analyzed by microbore HPLC-negative ion electrospray tandem mass spectrometry. PFOS was the main component of perfluorinated organic compounds (PFCs) and was detected in all 56 blood specimens at an average concentration of 28.8 ng mL(-1) and a range from 3.7 to 65.1 ng mL(-1). The concentration of PFOA was an order of magnitude lower than that of PFOS and was found only in 16 samples (29%) at concentrations above the limit of quantification (LOQ). PFOSA was not detected at levels above the method detection limit (MDL) in any of the samples. The levels of PFCs observed in the sample group of non-occupationally exposed humans in Canada were similar to the levels reported in a previous US study with a similar sample pool size. Two distinct PFOS isomers in human serum were identified by accurate mass determination.     

Antifungal activity of P3HB microparticles containing tebuconazole

In this study, tebuconazole (TEB)-loaded poly-3-hydroxybutyrate (P3HB)-based microparticles were developed and comprehensively characterized. TEB-loaded microparticles with the initial loading amounts of the fungicide of 10, 25, and 50% of the polymer mass (TEB 10, TEB 25, and TEB 50%) were prepared using emulsion technique. Encapsulation efficiency of TEB varied from 59 to 86%. As the loading amount was increased, the average diameter of microparticles increased too, from 41.3 to 71.7?µm, while zeta potential was not influenced by TEB loading, varying between –32.6 and –35.7?mV. TEB was gradually released from the microparticles to the model medium, and after 60?d, from 25 to 43% of TEB was released depending on the content of the encapsulated fungicide. The data obtained from in vitro TEB release were fitted to different mathematical models. It was shown that the release profiles of TEB could be best explained by the Zero-order, Higuchi, and Hixson–Crowell models. The antifungal activity of the P3HB/TEB microparticles against phytopathogenic fungi Fusarium moniliforme and Fusarium solani was demonstrated by in vitro tests conducted in Petri dishes. Thus, hydrophobic agrochemicals (TEB) can be effectively encapsulated into P3HB microparticles to construct slow-release formulations.     

Plastics and microplastics,effects on marine coastal areas: a review

Environmental Science and Pollution Research - Plastics have become strong environmental stressors of coastal marine ecosystems. Their introduction into the marine ecosystem is subjected to...     

Volatile carbonylic compounds in downtown Santiago, Chile

Formaldehyde, acetaldehyde, acetone, propanal, butanal, 2-butenal, 3-methylbutanal, hexanal, benzaldehyde, 2-methylbenzaldehyde, and 2,5-dimethylbenzaldehyde were measured during six spring days at downtown Santiago de Chile. Measurements were performed 24h/day and averaged over three hour periods. The averages of the maxima (ppbv) were, formaldehyde: 3.9+/-1.4; butanal: 3.3+/-3.4; acetaldehyde: 3.0+/-0.9; acetone: 2.4+/-1.0; 2-butenal: 0.56+/-0.52; propanal: 0.46+/-0.21; benzaldehyde: 0.34+/-0.3; 3-butanal: 0.11+/-0.05; hexanal: 0.11+/-0.08; 2-methylbenzaldehyde: 0.08+/-0.05; 2,5-dimethylbenzaldehyde: 0.05+/-0.03. Aliphatic aldehydes (C1-C3) are strongly correlated among them and weakly with primary (toluene) and secondary (ozone plus nitrogen dioxide or PAN) pollutants. In particular, the correlation between acetaldehyde and propanal values remains even if diurnal and nocturnal data are considered separately, indicating similar sources. All these aldehydes present maxima values in the morning (9-12h) and minima at night (0-3h). The best correlation is observed when butanal and 2-butenal data are considered (r=0.99, butanal/2-butenal=6.2). These compounds present maxima values during the 3-6h period, with minima values in the 0-3h period. These data imply a strong pre-dawn emission. Other aldehydes show different daily profiles, suggesting unrelated origins. Formaldehyde is the aldehyde whose concentration values best correlate with the levels of oxidants. The contribution of primary emissions and photochemical processes to formaldehyde concentrations were estimated by using a multiple regression. This treatment indicates that (32+/-16)% of measured values arise from direct emissions, while (79+/-23)% is attributable to secondary formation.