The use of a sequential leaching procedure for assessing the heavy metal leachability in lime waste from the lime kiln at a caustizicing process of a pulp mill

A five-stage sequential leaching procedure was used to fractionate 13 heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Al, Ni, Co, As, V, Ba) and sulphur (S) in lime waste from the lime kiln at the causticizing plant of Stora Enso Oyj Veitsiluoto Pulp Mills at Kemi, Northern Finland, into the following fractions: (1) water-soluble fraction (H₂O), (2) exchangeable fraction (CH₃COOH), (3) easily reduced fraction (HONH₃Cl), (4) oxidizable fraction (H₂O₂ + CH₃COONH₄), and (5) residual fraction (HF + HNO₃ + HCl). Although metals were leachable in all fractions, the highest concentrations for most of the metals were observed in the residual fraction (stage 5). It was also notable that the total heavy metal concentrations in lime waste did not exceed the maximal allowable heavy metal concentrations for soil conditioner agents set by the ministry of the Agricultural and Forestry in Finland. The heavy metals concentrations in lime waste were also lower than the maximal allowable heavy metals concentrations of the European Union Directive 86/278/EEC on the protection of environment, and in particular of the soil, when sewage sludge is used in agriculture. The Ca concentration (420 g kg⁻¹; d.w.) was about 262 times higher than the typical value of 1.6 g kg⁻¹ (d.w.) in arable land in Central Finland. However, the concentration Mg (0.2 g kg⁻¹; d.w.) in lime waste was equal to the Mg concentration in arable land in the Central Finland. The lime waste has strongly alkaline pH (12.8) and a neutralizing value (i.e. liming effect) of 47.9% expressed as Ca equivalents (d.w.). This indicates lime waste to be a potential soil conditioner and improvement as well as a pH buffer.     

Tissue localisation of tetra- and pentabromodiphenyl ether congeners (BDE-47, -85 and -99) in perinatal and adult C57BL mice

The distribution of polybrominated diphenyl ether (PBDE) congeners was followed in C57BL mice. The animals were subjected to whole-body autoradiography using (14)C-labelled 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',3,4,4'-pentabromodiphenyl ether (BDE-85) and 2,2',4,4',5-pentabromodiphenyl ether (BDE-99). Labelled BDE-85 and -99 were also used in quantitative studies on milk transfer and tissue concentrations during the neonatal period (12-15 days post partum), by use of liquid scintillation technique. The results show that in adult mice the studied PBDEs were effectively taken up, retained in fatty tissues and concentrated in some specific organs, i.e. the liver, adrenal cortex, ovary, lung and (initially) the brain. At longer post-injection time, the concentration in most tissues was considerably lower, and radioactivity was mainly found in fat depots and the liver. No significant difference in distribution between the three studied congeners was observed. Following maternal exposure, the foetal uptake was limited. On the other hand, during lactation a considerable fraction of the dose (about 20% of the studied penta-BDEs) given to the dam was transferred to the offspring. As in several cases the presently observed organ accumulation corresponds with earlier reports on PBDE effects in the same organs, the present results should be taken into consideration in the risk assessment of this compound group.     

Acid dissolution methods for heavy metals determination in pine needles

Microwave digestion procedures using HNO₃, HNO₃+H₂O₂, HNO₃+HClO₄, HF mixtures and dry ashing with HF were investigated for heavy metals analysis by either inductively coupled plasma-optical emission spectroscopy (ICP-OES) or ICP-mass spectrometry (ICP-MS) in pine needles. The HF digestion procedures gave about 1.5 times higher values than a mixture of HNO₃+H₂O₂ alone. For Ti determination in needles, the HF procedure using dry ashing is thus recommended. The mean concentrations amounted to 900 mg/kg for Fe and 21.8 mg/kg for Ti in needles collected at an area polluted by a stainless steel works. Those concentrations were 10.6 and 4.3 times higher than in needles collected at an area nearby a pulp mill complex (84.5 mg/kg Fe and 5.0 mg/kg Ti).     

Self-organization of circadian rhythms in groups of honeybees (Apis mellifera L.)

Workers in social groups of honeybees (Apis mellifera L.) synchronize their individual free-running circadian rhythms to an overall group rhythm. By monitoring the activity of bees by recording the oxygen consumption and intragroup temperature, it is shown that the rhythm coordination is in part achieved by temperature fluctuations as an intragroup Zeitgeber. Trophallaxis was shown to have only a minor (if any) effect on circadian rhythm synchronization. A model incorporating a feed back loop between temperature and activity can plausibly explain the observed synchronization of individual rhythms in social groups as a self-organization phenomenon. Correspondence to: R.F.A. Moritz     

Distribution of deciduous stands in villages located in coniferous forest landscapes in Sweden

Termination of fire along with active removal of deciduous trees in favor of conifers together with anthropogenic transformation of productive forest into agricultural land, have transformed northern European coniferous forests and reduced their deciduous component. Locally, however, in the villages, deciduous trees and stands were maintained, and have more recently regenerated on abandoned agricultural land. We hypothesize that the present distribution of the deciduous component is related to the village in-field/out-field zonation in different regions, which emerges from physical conditions and recent economic development expressed as land-use change. We analyzed the spatial distribution of deciduous stands in in-field and out-field zones of villages in 6 boreal/hemiboreal Swedish regions (Norrbotten, Angermanland, J?mtland, Dalarna, Bergslagen, Sm?land). In each region 6 individual quadrates 5 x 5 km centered on village areas were selected. We found significant regional differences in the deciduous component (DEC) in different village zones. At the scale of villages Angermanland had the highest mean proportion of DEC (17%) and J?mtland the lowest (2%). However, the amounts of the DEC varied systematically in in-field and out-field zones. DEC was highest in the in-field in the south (Sm?land), but generally low further north. By contrast, the amount of DEC in the out-field was highest in the north. The relative amount of DEC in the forest edge peaked in landscapes with the strongest decline in active agriculture (Angermanland, Dalarna, Bergslagen). Because former and present local villages are vital for biodiversity linked to the deciduous component, our results indicate a need for integrated management of deciduous forest within entire landscapes. This study shows that simplified satellite data are useful for estimating the spatial distribution of deciduous trees and stands at the landscape scale. However, for detailed studies better thematic resolution is needed to determine biologically relevant differences in quality of deciduous stands.     

Biodegradation of chlorinated solvents in a water unsaturated topsoil

In order to investigate topsoils as potential sinks for chlorinated solvents from the atmosphere, the degradation of trichloromethane (CHCl(3)), 1,1,1-trichloroethane (CH(3)CCl(3)), tetrachloromethane (CCl(4)), trichloroethene (C(2)HCl(3)) and tetrachloroethene (C(2)Cl(4)) was studied in anoxic laboratory experiments designed to simulate denitrifying conditions in water unsaturated topsoil. Active denitrification was demonstrated by measuring the release of 15N in N(2) to the headspace from added 15N labeled nitrate. The degradation of chlorinated aliphatic compounds was followed by measuring their concentrations in the headspace above the soil.The headspace concentrations of all the chlorinated solvents except CH(3)CCl(3) were significantly (P相似文献   

Two-dimensional gap analysis: a tool for efficient conservation planning and biodiversity policy implementation

The maintenance of biodiversity by securing representative and well-connected habitat networks in managed landscapes requires a wise combination of protection, management, and restoration of habitats at several scales. We suggest that the integration of natural and social sciences in the form of "Two-dimensional gap analysis" is an efficient tool for the implementation of biodiversity policies. The tool links biologically relevant "horizontal" ecological issues with "vertical" issues related to institutions and other societal issues. Using forest biodiversity as an example, we illustrate how one can combine ecological and institutional aspects of biodiversity conservation, thus facilitating environmentally sustainable regional development. In particular, we use regional gap analysis for identification of focal forest types, habitat modelling for ascertaining the functional connectivity of "green infrastructures", as tools for the horizontal gap analysis. For the vertical dimension we suggest how the social sciences can be used for assessing the success in the implementation of biodiversity policies in real landscapes by identifying institutional obstacles while implementing policies. We argue that this interdisciplinary approach could be applied in a whole range of other environments including other terrestrial biota and aquatic ecosystems where functional habitat connectivity, nonlinear response to habitat loss and a multitude of economic and social interests co-occur in the same landscape.     

Economic assessment of the negative impacts of ozone on crop yields and forest production. A case study of the estate Ostads Säteri in southwestern Sweden

Ground level ozone concentrations, in combination with the prevailing climate, at the estate Ostads S?teri in southwestern Sweden were estimated to reduce the yield of wheat and potato ranging between 5% and 10%. Occasionally, in years with the highest ozone concentrations and/or climatic conditions favoring high rates of ozone uptake to the leaves, yield loss levels above 10% may occur. Based on simple extrapolation, these ozone-induced reductions of crop yields at Ostads S?teri represent a potential total annual yield loss in Sweden in the range of 24.5 million Euro for wheat and 7.3 million Euro for potato, respectively. A simulation of forest growth at Ostad S?teri predicted that prevailing mean ozone exposure during 1993-2003 had the potential to reduce forest growth by 2.2% and the economic return of forest production by 2.6%. Using this value for extrapolation to the national level, the potential annual economic loss for Sweden due to negative impacts of ozone on forest production would be in the range of 56 million Euro (2004 prices).     

The use of a sequential leaching procedure for heavy metal fractionation in green liquor dregs from a causticizing process at a pulp mill

A five-stage sequential leaching procedure was used to fractionate heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Ni, Co, As, V, Ba and Ti) in green liquor dregs into the following fractions: (1) water-soluble fraction (H2O), (2) exchangeable fraction (CH3COOH), (3) easily reduced fraction (HONH3Cl), (4) oxidizable fraction (H2O2 + CH3COONH4), and (5) residual fraction (HF + HNO3 + HCl). The green liquor dregs were derived from a causticizing process at a pulp mill at Kemi, Northern Finland. According to the leaching studies, the leachability of heavy metals in the water-soluble fraction varied between 0.5 and 2 mg kg(-1) expressed on a dry weight (d.w.) basis, indicating relatively low bioavailability of the metals. However, the concentration of Mn (2065 mg kg(-1); d.w.) showed a strong and of Zn (17.6 mg kg(-1); d.w.), Ni (39.7 mg kg(-1); d.w.) and Ba (32.0 mg kg(-1); d.w.) slightly tendency to be extracted in the exchangeable fraction. In addition, Zn, Mn, Ni, Co, V and Ba showed clear leachability in the easily reduced fraction, as well as Cd, Cu, Cr, Zn, Mn, As and Ba in the oxidizable fraction. For Cd, Cu, Cr, Zn, Mn, Ni, Co, Ba and Ti, the sum of leachable heavy metal concentrations in fractions 1-5 agreed relatively well with the "total" heavy metal concentrations. Recoveries of the sum of fractions 1-5 were 84-56% of those obtained by the US EPA method 3052 (i.e. concentrations obtained after microwave oven digestion with a mixture of HF and HNO3).