In situ assessment of modification of sediment properties by burrowing invertebrates

Benthic organisms can significantly alter the physical properties of marine sediments, but it has hitherto been difficult to assess and quantify the effects of bioturbation. In situ geophysical techniques offer new methods for measuring these effects: measurement of acoustic shear-wave velocity and electrical resistivity allows nondestructive assessment of the properties of the grain framework and pore-fluid matrix, respectively, of the seabed sediment. The influence of burrowing invertebrates on the structural properties of sandy sediments at intertidal locations on the coast of Wales (UK) was investigated during the periol 1986–1987 using these techniques. Three species (Arenicola marina, Corophium arenarium and Lanice conchilega) were selected on the basis of their contrasting styles of burrow construction. All three species produced measurable and significant, although different, changes in bed properties. They modified shear-wave propagation through the bed by changing bed rigidity: while A. marina and C. arenarium decreased rigidity by creating open burrows, L. conchilega increased rigidity by building shell-lined tubes. All produced a decrease in electrical resistivity by altering porosity and/or tortuosity, which implies an increase in permeability; these changes were attributable not only to the presence of the burrows but also to modification of the between-burrow sediment texture and bed properties.     

Upflow reactors for riparian zone denitrification

We used permeable reactive subsurface barriers consisting of a C source (wood particles), with very high hydraulic conductivities ( approximately 0.1-1 cm s(-1)), to provide high rates of riparian zone NO3-N removal at two field sites in an agricultural area of southwestern Ontario. At one site, a 0.73-m3 reactor containing fine wood particles was monitored for a 20-mo period and achieved a 33% reduction in mean influent NO3-N concentration of 11.5 mg L(-1) and a mean removal rate of 4.5 mg L(-1) d(-1) (0.7 g m(-2) d(-1)). At the second site, four smaller reactors (0.21 m3 each), two containing fine wood particles and two containing coarse wood particles, were monitored for a 4-mo period and were successful in attenuating mean influent NO3-N concentrations of 23.7 to 35.1 mg L(-1) by 41 to 63%. Mean reaction rates for the two coarse-particle reactors (3.2 and 7.8 mg L(-1) d(-1), or 1.5 and 3.4 g m(-2) d(-1)) were not significantly different (p > 0.2) than the rates observed in the two fine-particle reactors (5.0 and 9.9 mg L(-1) d(-1), or 1.8-3.5 g m(-2) d(-1)). A two-dimensional ground water flow model is used to illustrate how permeable reactive barriers such as these can be used to redirect ground water flow within riparian zones, potentially augmenting NO3- removal in this environment.     

Toxic equivalent concentrations (TEQs) for baseline toxicity and specific modes of action as a tool to improve interpretation of ecotoxicity testing of environmental samples

The toxic equivalency concept is a widely applied method to express the toxicity of complex mixtures of compounds that act via receptor-mediated mechanisms such as induction of the arylhydrocarbon or estrogen receptors. Here we propose to extend this concept to baseline toxicity, using the bioluminescence inhibition test with Vibrio fischeri, and an integrative ecotoxicity endpoint, algal growth rate inhibition. Both bioassays were validated by comparison with literature data and quantitative structure-activity relationships (QSARs) for baseline toxicity were developed for all endpoints. The novel combined algae test, with Pseudokirchneriella subcapitata, allows for the simultaneous evaluation of specific inhibition of photosynthesis and growth rate. The contributions of specific inhibition of photosynthesis and non-specific toxicity could be differentiated by comparing the time and endpoint pattern. Photosynthesis efficiency, measured with the saturation pulse method after 2 h of incubation, served as indicator of specific inhibition of photosynthesis by photosystem II inhibitors. Diuron equivalents were defined as toxicity equivalents for this effect. The endpoint of growth rate over 24 h served to derive baseline toxicity equivalent concentrations (baseline-TEQ). By performing binary mixture experiments with reference compounds and complex environmental samples from a sewage treatment plant and a river, the TEQ concept was validated. The proposed method allows for easier interpretation and communication of effect-based water quality monitoring data and provides a basis for comparative analysis with chemical analytical monitoring.     

Gas chromatographic methods for monitoring of wastewater chlorophenol degradation in anaerobic reactors

Wastewater samples from an anaerobic reactor were extracted with hexane and derivatized with diazomethane (method 1) and with acetic anidride (method 2). Gas chromatography with electron-capture detection (ECD) was employed for separating the parent compound and intermediates trichlorophenols (TCP) and dichlorophenols (DCP) which originated from the penta chlorophenol (PCP) degradation process. The relations between concentrations of PCP, TCP and DCP areas were linear in the range of concentrations of 0.2 to 8 mg/L and 0.025 mg/L to 5 mg/L for methods 1 and 2, respectively. The repeatability of the extraction methods was satisfactory, with variation coefficients lower than 11%. For method 1, at the fortification level of 0.2 mg/L, recovery of PCP, TCP, and DCP was 112%, 74% and 45%, respectively. For method 2, the corresponding recovery values at the fortification level of 0.1 mg/L were 91%, 93% and 103%, respectively. Storage of the frozen samples did not alter their PCP determination properties. The chromatographic methods adapted for chlorophenol determination in wastewater were suitable with relatively simple manipulation techniques. The obtained results were reproducible and allowed identification of intermediates formed during the PCP degradation process.     

公园游客管理概念的演变

要保护公园的生态、社会、经济和文化价值 ,游客管理具有根本的重要性 . 政府要求公园进一 步在财政上自给自足 . 正在制定一个更加完善的管理方法代替单纯地限制游客的数量 . 这种 方法鼓励公众参与公园的目标设定和游客满意度评价 ,并奖励胜任的财务管理 .     

Prenatal prediction of childhood-onset spinal muscular atrophy (SMA) in Turkish families

Childhood-onset spinal muscular atrophy (SMA) is one of the most common neurodegenerative genetic disorders. SMN1 is the SMA-determining gene deleted or mutated in the majority of SMA cases. There is no effective cure or treatment for this disease yet. Thus, the availability of prenatal testing is important. Here we report prenatal prediction for 68 fetuses in 63 Turkish SMA families using direct deletion analysis of the SMN1 gene by restriction digestion. The genotype of the index case was known in 40 families (Group A) but unknown in the remaining 23 families (Group B). A total of ten fetuses were predicted to be affected. Eight of these fetuses were derived from Group A and two of these fetuses were from Group B families. Two fetuses from the same family in Group A had the SMNhyb1 gene in addition to homozygous deletion of the NAIP gene. One fetus from Group A was homozygously deleted for only exon 8 of the SMN2 gene, and further analysis showed the presence of both the SMN1 and SMNhyb1 genes but not the SMN2 gene. In addition, one carrier with a homozygous deletion of only exon 8 of the SMN1 gene was detected to have a SMNhyb2 gene, which was also found in the fetus. To our knowledge, these are the first prenatal cases with SMNhyb genes. Follow-up studies demonstrated that the prenatal predictions and the phenotype of the fetuses correlated well in 33 type I pregnancies demonstrating that a careful molecular analysis of the SMN genes is very useful in predicting the phenotype of the fetus in families at risk for SMA. Copyright © 2002 John Wiley & Sons, Ltd.     

Design approaches for a cycling adsorbent/photocatalyst system for indoor air purification: formaldehyde example

A kinetic model for a cycling adsorbent/photocatalyst combination for formaldehyde removal in indoor air (Chin et al. J. Catalysis 2006, 237, 29-37) was previously developed in our lab, demonstrating agreement with lab-scale batch operation data of other researchers (Shiraishi et al. Chem. Engineer. Sci. 2003, 58, 929-934). Model parameters evaluated included adsorption equilibrium and rate constants for the adsorbent (activated carbon) honeycomb rotor, and catalytic rate constant for pseudo-first-order formaldehyde destruction in the titanium dioxide photoreactor. This paper explores design consequences for this novel system. In particular, the batch parameter values are used to model both adsorbent and photocatalyst behavior for continuous operation in typical residential home challenges. Design variables, including realistic make-up air fraction, adsorbent honeycomb rotation speed, and formaldehyde source emission rate, are considered to evaluate the ability of the system to achieve World Health Organization pollutant guidelines. In all circumstances, the size of the required rotating adsorbent bed and photoreactor for single-stage operation and the resultant formaldehyde concentration in the home are calculated. The ability of how well such a system might be accommodated within the typical dimensions of commercial ventilation ducts is also considered.     

Methods for treating soils contaminated with polychlorinated dibenzo-p-dioxins, dibenzofurans, and other polychlorinated aromatic compounds

This review provides a summary of methods for treating soils contaminated with polychlorinated aromatic compounds, especially polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Unlike many other soil pollutants, PCDD/Fs bind tightly to the soil, which severely reduces the efficiency of most aqueous treatment procedures and leaves few realistic alternatives besides the traditional containment techniques (landfill, solidification/stabilization, and in situ vitrification). Incineration has long been, and still is, the most efficient destruction technique, with a removal efficiency of >99.9999%. However, supercritical water oxidation, base-catalyzed decomposition, steam distillation, and various extraction techniques, such as solvent and liquefied gas and subcritical water extraction, may provide removal efficiencies of >95%. Many of the alternative techniques are expected to be cheaper than incineration and may therefore be attractive for moderately polluted soils. However, some of them are at an early stage of development and need to be further tested before their true potential can be assessed.