Hydrobiogeochemical Controls on Riparian Nutrient and Greenhouse Gas Dynamics: 10 Years Post‐Restoration

Little is known about the impact of agricultural legacy on subsurface biogeochemical processes in the years following restoration of riparian wetlands (WLs). More knowledge is also needed on the relative importance of seasons, precipitation events, and inputs of water and nutrients driving nitrogen (N), phosphorus (P), sulfur (S), and greenhouse gas (GHG) (N₂O, CO₂, CH₄) dynamics in these systems. This investigation of a riparian zone comprising a restored WL area and a nonrestored well‐drained alluvium (AL) area in the United States Midwest revealed that despite successful hydrological restoration a decade earlier, biogeochemical conditions in the WL area remained less anoxic than in natural WLs, and not significantly different from those in the AL area. No significant differences in N, P, S, and C compound concentrations or fluxes were observed between the AL and WL areas. Over the duration of the study, nitrate (NO₃^?) and soluble reactive phosphorus appeared to be primarily driven by hillslope contributions. Ammonium (NH₄⁺), sulfate (SO₄^2?), and CO₂ responded strongly to seasonal changes in biogeochemical conditions in the riparian zone, while N₂O and CH₄ fluxes were most influenced by large rewetting events. Overall, our results challenge overly simplistic assumptions derived from direct interpretation of redox thermodynamics, and show complex patterns of solutes and GHGs at the riparian zone scale.     

Investigation of heat transfer and heterogeneous reactions during the slow cook off of a composite propellant

In this work, a new modelling of interactions between components of aluminium/ammonium perchlorate/HTPB propellant during slow heating is presented. The phenomenon was previously described by experimental approaches performed in the laboratory. Heat and mass balance will be considered both in the solid and gas phases. The interaction of the decomposition products of both ammonium perchlorate and HTPB binder is shown thanks to previous experiments and a specific numerical model allows us to reproduce this trend. Mass and heat transfers are taken into account in each particle of ammonium perchlorate and inside the matrix of the HTPB binder. The chemical reaction in the gas phase is in interaction with the adsorption desorption of several species with regard to the surface grains. The whole set of equations is solved thanks to Comsol multiphysic solver and the numerical results are compared with mass loss measurements by means of a thermogravimetric device.     

2006年碳市场发展状况与趋势分析(第1～3季度)

执行总结 碳市场总价值在2006年前三季度增长到215亿美元。比上年上涨一倍有余（见表格一）。全球碳市场主要以欧盟排放交易体系（EUETS）为主，且成功摆脱了由于2006年5月核证减排量数据公布而引起的交易价格下滑、市场疲软的局面。同时，基于项目的市场总值也在今年的前九个月增至24亿1000万美元。     

How environment and vole behaviour may impact rodenticide bromadiolone persistence in wheat baits after field controls of Arvicola terrestris?

We aimed to evaluate whether environmental factors affect the persistence of bromadiolone in baits in field treatment. Baits were distributed in three soils according to two types of distribution: (1) artificial galleries conform to agricultural practices; (2) storage cavities to mimic bait storage by voles. Persistence was evaluated for 30 days in galleries and 80 days in storage cavities in autumn and spring. The decrease of bromadiolone concentrations was described by a first-order kinetic model. In galleries, the half-lives ranged from 3.0 to 5.1 days in autumn and from 5.4 to 6.2 days in spring. The half-lives were similar between soils and seasons but the pattern of persistence differed lightly for two soils between seasons. Half-lives in storage cavities, 42.7 and 24.6 days in autumn and spring respectively, were longer than in galleries. To conclude, both soil characteristics and climatic conditions weakly influence persistence, while bait storage lengthens it dramatically.     

Prenatal overgrowth and mosaic trisomy 15q25-qter including the IGF1 receptor gene

Overgrowth is rarely associated with chromosomal imbalances. Here, we report on a male foetus presenting with overgrowth and additional material on the short arm of one of the chromosome 15 in 12% of lymphocytes and 50% of amniotic cells. Parents' karyotypes were normal, indicating a de novo origin for this unbalanced rearrangement. Complementary studies using cytogenetic and FISH studies showed that this additional material resulted in a 15q25-qter trisomy and confirmed the presence of three copies of the insulin-like growth factor 1 receptor (IGF1R) gene, included in the trisomic region. Autopsy performed after termination of pregnancy revealed isolated overgrowth and absence of visceral malformations. The possible mechanisms and origins for the formation of this mosaic pure trisomy are complex. The present observation emphasises the hypothesis that the overgrowth phenotype, frequently reported in patients with trisomy including the 15q26 region, might be causally related to a dosage effect of the IGF1R gene, as well as the importance of chromosome analysis in patients with overgrowth. It also confirms that the overgrowth is of prenatal onset in those observations. Copyright © 2004 John Wiley & Sons, Ltd.     

Evaluation of the Effect of Chemical or Enzymatic Synthesis Methods on Biodegradability of Polyesters

This work compares the biodegradability of polyesters produced by an esterification reaction between glycerol and oleic di-acid (D 18:1) issued from green chemical pathways, via either classical thermo-chemical methods, or an enzymatic method using the immobilized lipase of Candida antartica B (Novozym 435). An elastomeric polymer synthesized by enzymatic catalysis is more biodegradable than an elastomeric thermo-chemical polyester synthesized by a standard chemical procedure. This difference lies in percentage of the dendritic motifs, in values of the degree of substitution, and certainly in cross-links inducing an hyper-branched structure less accessible to the lipolytic enzymes in a waste treatment plant. However, when the elastomeric polymer synthesized by enzymatic catalysis is processed at high temperature as required for certain industrial applications, it presents an identical rate of biodegradation than the chemical polyester. The advantages of the thermo-chemical methods are greater speed and lower cost. Enzymatic synthesis appears be suited to producing polyesters, devoid of metallic catalysts, which must be used without processing at high temperature to keep a high biodegradability.     

Magnetic molecularly imprinted polymer prepared by microwave heating for confirmatory determination of chloramphenicol in chicken feed using high-performance liquid chromatography-tandem mass spectrometry

Abstract

A magnetic molecularly imprinted polymer (MMIP) for chloramphenicol was prepared using a surface-imprinted and microwave-heating-induced polymerization method. The surfaces of the magnetic particles were first double-bond functionalized with 3-(trimethoxysilyl)propyl methacrylate (γ-MPS), followed by the copolymerization of 4-vinyl pyridine (4-VP) and trimethylolpropane trimethacrylate (TRIM) in the presence of chloramphenicol as a template and 1,1-azobis(cyclohexane-carbonitrile) (ABCN) as an initiator in a mixture of dimethyl sulfoxide and water with microwave heating at 80°C. The magnetic polymer possesses supraparamagnetic properties and was used to concentrate and cleanup chicken feed extract, followed by chromatographic separation using a Lichrospher®100 RP C8 column and detection with two multi-reaction monitoring transitions at m/z 321→ 152 and m/z 321→ 257. The mean recoveries obtained at two spiking levels were in the range of 94.6–100% The relative intra- and inter-day standard deviations were in the range of 1.4–2.6% and 5.1–5.7%, respectively. The detection limit of the method was 0.12 µg kg^?1. This confirmatory method was successfully applied to determine chloramphenicol in chicken feed samples.     

Transfer parameter values in temperate forest ecosystems: a review

Compared to agricultural lands, forests are complex ecosystems as they can involve diverse plant species associations, several vegetative strata (overstorey, shrubs, herbaceous and other annual plant layer) and multi-layered soil profiles (forest floor, hemi-organic and mineral layers). A high degree of variability is thus generally observed in radionuclide transfers and redistribution patterns in contaminated forests. In the long term, the soil compartment represents the major reservoir of radionuclides which can give rise to long-term plant and hence food contamination. For practical reasons, the contamination of various specific forest products has commonly been quantified using the aggregated transfer factor (T_ag in m² kg⁻¹) which integrates various environmental parameters including soil and plant type, root distribution as well as nature and vertical distribution of the deposits. Long lasting availability of some radionuclides was shown to be the source of much higher transfer in forest ecosystems than in agricultural lands. This study aimed at reviewing the most relevant quantitative information on radionuclide transfers to forest biota including trees, understorey vegetation, mushrooms, berries and game animals. For both radiocaesium and radiostrontium in trees, the order of magnitude of mean T_ag values was 10⁻³ m² kg⁻¹ (dry weight). Tree foliage was usually 2–12 times more contaminated than trunk wood. Maximum contamination of tree components with radiocaesium was associated with (semi-)hydromorphic areas with thick humus layers. The transfer of radionuclides to mushrooms and berries is high, in comparison with foodstuffs grown in agricultural systems. Concerning caesium uptake by mushrooms, the transfer is characterized by a very large variability of T_ag, from 10⁻³ to 10¹ m² kg⁻¹ (dry weight). For berries, typical values are around 0.01–0.1 m² kg⁻¹ (dry weight). Transfer of radioactive caesium to game animals and reindeer and the rate of activity reduction, quantified as an ecological half-life, reflect the soil and pasture conditions at individual locations. Forests in temperate and boreal regions differ with respect to soil type and vegetation, and a faster decline of muscle activity concentrations in deer occurs in the temperate zone. However, in wild boar the caesium activity concentration shows no decline because of its special feeding habits. In the late phase, i.e. at least a few months since the external radionuclide contamination on feed plants has been removed, a T_ag value of 0.01 m² kg⁻¹ (fresh weight) is common for ¹³⁷Cs in the muscles of adult moose and terrestrial birds living in boreal forests, and 0.03 m² kg⁻¹ (fresh weight) for arctic hare. Radiocaesium concentrations in reindeer muscle in winter may exceed the summer content by a factor of more than two, the mean T_ag values for winter ranging from 0.02 to 0.8 m² kg⁻¹ (fresh weight), and in summer from 0.04 to 0.4 m² kg⁻¹. The highest values are found in the year of initial contamination, followed by a gradual reduction. In waterfowl a relatively fast decline in uptake of ¹³⁷Cs has been found, with T_ag values changing from 0.01 to 0.002 m² kg⁻¹ (fresh weight) in the three years after the contaminating event, the rate being determined by the dynamics of ¹³⁷Cs in aquatic ecosystems.     

Impact of sampling strategy on stream load estimates in till landscape of the Midwest

Accurately estimating various solute loads in streams during storms is critical to accurately determine maximum daily loads for regulatory purposes. This study investigates the impact of sampling strategy on solute load estimates in streams in the US Midwest. Three different solute types (nitrate, magnesium, and dissolved organic carbon (DOC)) and three sampling strategies are assessed. Regardless of the method, the average error on nitrate loads is higher than for magnesium or DOC loads, and all three methods generally underestimate DOC loads and overestimate magnesium loads. Increasing sampling frequency only slightly improves the accuracy of solute load estimates but generally improves the precision of load calculations. This type of investigation is critical for water management and environmental assessment so error on solute load calculations can be taken into account by landscape managers, and sampling strategies optimized as a function of monitoring objectives.