Effects of wavelength and water quality on photodegradation of N-Nitrosodimethylamine (NDMA)

N-Nitrosodimethylamine (NDMA) is a potent carcinogen that yields a cancer risk of 10⁻⁶ at concentrations as low as 0.7 ng L⁻¹. Tentative guideline values are set at 3 ng L⁻¹ in California, USA; 9 ng L⁻¹ in Ontario, Canada; 40 ng L⁻¹ nationwide in Canada; and 100 ng L⁻¹ by the World Health Organization. NDMA is a great concern in treating reclaimed water as well as drinking water. UV degradation can be considered effective degradation method. A 1-log reduction of NDMA is achieved by 1000 mJ cm⁻² of a 254-nm low pressure (LP) mercury UV lamp. However, a higher degradation efficiency than that provided by LP lamps is desired in practical treatment. In this study, the effects of wavelength and water quality were investigated to achieve higher degradation efficiency. The effects of wavelength were examined by comparing three UV lamps: a 222-nm Kr Cl Excimer UV lamp, a 254-nm LP mercury UV lamp, and a 230- to 270-nm filtered medium pressure (FMP) mercury UV lamp. The 222-nm lamp and FMP lamp achieved 4 times and 2.8 times higher degradation efficiency, respectively, than the conventional 254-nm LP lamp. Effects on water quality were also simulated by using absorption spectrum data of nitrate solutions and process water from a drinking-water treatment plant. In the simulation, the 222-nm lamp was affected by UV-absorbing compounds in the water, whereas the FMP lamp showed more stable degradation efficiency. Appropriate use of these three types of lamps could enhance the efficiency of degradation of NDMA.     

International comparative study of 3R and waste management policy developments

Reduce, reuse, and recycle (3R) policies form the basis of waste management and global warming countermeasures globally, so we conducted a comparative study of 3R and waste management policies in the European Union (EU), USA, Korea, Japan, China, and Vietnam. An international workshop for 3R and waste management policymakers was held in Kyoto, Japan, and a bibliographic survey was also conducted to collect data. 3R policies are clearly given priority in the hierarchy of waste management in every country studied. Thermal recovery, which includes power generation from waste heat and methane gas collected from organic waste, is also a priority; this is consistent with the increased use of countermeasures to reduce greenhouse gas (GHG) emissions. In the EU, waste management is characterized by practical and effective 3R policies through the development of realistic regulations and by the policymakers??desire to simplify management systems. The policy ideal in China, however, is the development of a circular economy that targets reductions in the amount and hazardousness of waste. Limits on the number of final disposal sites, strategies for procuring resources, and GHG emission countermeasures are closely linked with 3R policies, and further development of 3R policies in parallel with such issues is expected.     

Mass balance and long-term fate of PCDD/Fs in a lagoon sediment and paddy soil, Niigata, Japan

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in a sediment core and in samples of surface sediment and paddy soil collected from the Toyano lagoon and Kameda basin in Niigata, Japan, were analyzed to elucidate the temporal trends of their concentrations in the lagoon sediment and the relationship between the sediment and the paddy soil. The mass balance of these pollutants was also estimated to determine their long-term fate in surface waters. An analysis by chemical mass balance identified the agrochemicals pentachlorophenol and 2,4,6-trichlorophenyl 4-nitrophenyl ether as the major sources of PCDD/Fs. On the basis of the findings regarding the mass balance in the Kameda basin over the last 40 years, we estimate that more than half the input of PCDD/Fs to the Kameda basin has disappeared. We suggest that the PCDD/Fs that flowed out from the paddy fields have been transferred to the lower basin.     

PCB decomposition and formation in thermal treatment plant equipment

In this study we investigated both the decomposition and unintentional formation of polychlorinated biphenyl congeners during combustion experiments of refuse-derived fuel (RDF) and automobile shredder residue (ASR) at several stages in thermal treatment plant equipment composed of a primary combustion chamber, a secondary combustion chamber, and other equipments for flue gas treatment. In both experiments, the unintentional formation of PCB occurred in the primary combustion chamber at the same time as the decomposition of PCB in input samples. By combusting RDF, non-ortho-PCB predominantly formed, whereas ortho-PCB and symmetric chlorinated biphenyls (e.g., #52/69, #87/108, and #151) tended to be decomposed. ASR formed the higher chlorinated biphenyls more than RDF. These by-products from ASR had no structural relation with ortho-chlorine. Lower chlorinated biphenyls appeared as predominant homologues at the final exit site, while all congeners from lower to higher chlorinated PCB were unintentionally formed as by-products in the primary combustion chamber. This result showed that the flue gas treatment equipments effectively removed higher chlorinated PCB. Input marker congeners of RDF were #11, #39, and #68, while those for ASR were #11, #101, #110/120, and #118. Otherwise, combustion marker congeners of RDF were #13/12, #35, #77, and #126, while those for ASR were #170, #194, #206, and #209. While the concentration of PCB increased significantly in the primary combustion chamber, the value of toxicity equivalency quantity for dioxin-like PCB decreased in the secondary combustion chamber and the flue gas treatment equipments.     

Effects of pH on the water solubility and 1-octanol-water partition coefficient of 2,4,6-tribromophenol

2,4,6-Tribromophenol (TBP) is expected to exist in both ionic and non-ionic forms in the environment due to ionisation of the phenolic group at near neutral pH. In this study, the water solubility (Sw) and 1-octanol-water partition coefficient (Kow) of aqueous solutions of TBP at various pH values were measured using the shake flask method. The ionisation resulted in increasing Sw and decreasing Kow by two to three orders of magnitude. From the experimental results, the environmental partitioning characteristics of TBP and the effect of pH on partitioning were discussed through a comparison with the properties of tetrabromobisphenol A (TBBP-A), which has two phenolic groups. Furthermore, the pH dependence of Sw and Kow was represented using a Henderson-Hasselbalch type model and the validity of the model was evaluated. The model was found to be highly useful for predicting the pH dependence within the range of pH 3 to 9.     

Determination of adrenal steroids by microfluidic chip using micellar electrokinetic chromatography

This paper describes a sensitive and convenient method to separate progesterone, 17alpha-hydroxy progesterone, cortexolone, hydrocortisone and cortisone, all of which are steroids and have similar structures, using microfluidic chip-based technology with UV detection at 252 nm. We successfully obtained high-speed separation of the five steroids within 70 s in optimized microfluidic controls and micellar electrokinetic chromatography (MEKC) separation conditions. Fairly good linearity with correlation coefficient of over 0.98 from 10 or 20 to 100 mg/l steroid chemicals was obtained. The limits of detection obtained at a signal to noise ratio of 3 were from 3.89 to 7.80 mg/l. The values of the relative standard deviation (RSD) were 0.98-1.34% for repetitive injection (n = 12) and the intraday and interday RSDs were below 6%. The highly stable response reflected the feasibility of this method.     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Brominated flame retardants and heavy metals in automobile shredder residue (ASR) and their behavior in the melting process

The End-of-life Vehicles Recycling Act went into effect on January 1, 2005, in Japan and requires the proper treatment of airbags, chlorofluorocarbons (CFCs), and automobile shredder residue (ASR). The need for optimal treatment and recycling of ASR, in particular, has been increasing year after year because ASR is regarded as being difficult to treat. Dioxin-related compounds, brominated flame retardants (BFRs), heavy metals, chlorine and organotin compounds are all present in high concentrations in ASR. The authors conducted ASR melting treatment tests using a 10-tons/day-scale direct melting system (DMS), which employs shaft-type gasification and melting technology. The results obtained showed that dioxin-related compounds and BFRs were decomposed by this melting treatment. The high-temperature reducing atmosphere in the melting furnace moved volatile heavy metals such as lead and zinc into the fly ash where they were distributed at a rate of more than 90% of the input amount. This treatment was also found to be effective in the decomposition of organotin, with a rate of decomposition higher than 99.996% of the input amount. Via the recovery of heavy metals concentrated in the fly ash, all the products discharged from this treatment system were utilized effectively for the complete realization of an ASR recycling system that requires no final disposal sites.