Role of religious communities in enhancing transition experiments: a localised strategy for sustainable solid waste management in Malaysia

Religion in its most ideal form is seen as a powerful force to create ecological transformations to succeeding generations that share similar religious beliefs. This provides an interesting argument for enhancing their role in sustainability transitions. Malaysia is a relevant geographical context in this regard since almost all of its citizens formally embrace some kind of religious belief. However, such ideas are discussed mostly at the theoretical level with little systematic empirical investigation. This paper aims to fill this gap by presenting theoretically informed empirical insights on how a number of religious communities are currently creating successful experiments in recycling within the context of an urban community in Malaysia. The paper argues that such evidence may demonstrate the ‘potential’ role of religious communities to provide localised resources for recycling experiments that can be advantageous for the transition towards a more sustainable municipal solid waste management in Malaysia. The empirical basis of this paper is based on an exploratory multiple case study of successful recycling programmes conducted by selected religious communities from four key religions in Malaysia—Buddhism, Christianity, Hinduism and Islam. The theoretical framework for this research is based on the sustainability transitions literature, particularly the ‘transition experiment’ framework.     

Evaluation of the giant reed (<Emphasis Type="Italic">Arundo donax</Emphasis>) in horizontal subsurface flow wetlands for the treatment of recirculating aquaculture system effluent

Introduction

Two emergent macrophytes, Arundo donax and Phragmites australis, were established in experimental subsurface flow, gravel-based constructed wetlands (CWs) receiving untreated recirculating aquaculture system wastewater.

Materials and methods

The hydraulic loading rate was 3.75 cm day^?1. Many of the monitored water quality parameters (biological oxygen demand [BOD], total suspended solids [TSS], total phosphorus [TP], total nitrogen [TN], total ammoniacal nitrogen [TAN], nitrate nitrogen [NO₃], and Escherichia coli) were removed efficiently by the CWs, to the extent that the CW effluent was suitable for use on human food crops grown for raw produce consumption under Victorian state regulations and also suitable for reuse within aquaculture systems.

Results and discussion

The BOD, TSS, TP, TN, TAN, and E. coli removal in the A. donax and P. australis beds was 94%, 67%, 96%, 97%, 99.6%, and effectively 100% and 95%, 87%, 95%, 98%, 99.7%, and effectively 100%, respectively, with no significant difference (p?>?0.007) in performance between the A. donax and P. australis CWs. In this study, as expected, the aboveground yield of A. donax top growth (stems + leaves) (15.0?±?3.4 kg wet weight) was considerably more than the P. australis beds (7.4?±?2.8 kg wet weight). The standing crop produced in this short (14-week) trial equates to an estimated 125 and 77 t ?ha^?1 year^?1 biomass (dry weight) for A. donax and P. australis, respectively (assuming that plant growth is similar across a 250-day (September–April) growing season and a single-cut, annual harvest).

Conclusion

The similarity of the performance of the A. donax- and P. australis-planted beds indicates that either may be used in horizontal subsurface flow wetlands treating aquaculture wastewater, although the planting of A. donax provides additional opportunities for secondary income streams through utilization of the energy-rich biomass produced.

     

A study of heavy metals and their fate in the composting of tannery sludge

Tannery waste is categorized as toxic and hazardous in Malaysia due to its high content of Cr (in excess of 500 mg/kg) and other heavy metals. Heavy metals, when in high enough concentrations, have the potential to be both phytotoxic and zootoxic. Heavy metals are found as contaminants in tannery sludge. This investigation aimed to identify the fate of chromium, cadmium, copper, lead, and zinc concentrations in tannery sludge throughout a 50-day composting cycle. The results of this study showed a general increase in the removal of Cr, Cd, Pb, and to a much smaller extent Zn and Cu, manifested by a decrease in their overall concentrations within the solid fraction of the final product (the decreases were likely the result of leaching). Furthermore, in using a sequential extraction method for sludge composting at different phases of treatment, a large proportion of the heavy metals were found to be associated to the residual fraction (70-80%) and fractions more resistant to extraction, X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of the metals were bound to bioavailable fractions X-(KNO3+H2O).     

Heavy metal concentrations in water and sediments in Tasik Chini, a freshwater lake, Malaysia

The purpose of this paper are to determine the concentration of heavy metals namely cadmium (Cd), copper (Cu) and lead (Pb) in water and sediment; and to investigate the effect of sediment pH and sediment organic matter on concentration of cadmium, copper and lead in sediment at oxidation fraction. For this purpose the concentration of heavy metals were measured in water and sediments at 15 sites from Tasik Chini, Peninsular Malaysia. The sequential extraction procedure used in this study was based on defined fractions: exchangeable, acid reduction, oxidation, and residual. The concentration of heavy metals in residual fraction was higher than the other fractions. Among the non-residual fractions, the concentration of heavy metals in organic matter fraction was much higher than other fractions collected from all sampling sites. The pH of the sediment in all sites was acidic. The mean pH ranges from 4.8 to 5.5 with the higher value observed at site 15. Results of organic matter analysis showed that the percentage of organic matter present in sediment samples varies throughout the lake and all sites of sediments were relatively rich in organic matter ranging from 13.0% to 34.2%. The highest mean percentage of organic matter was measured at sampling site 15, with value of 31.78%.     

On–off control of aeration time in the simultaneous removal of ammonia and manganese using a biological aerated filter system

The biological aerated filter (BAF) system, a new alternative in drinking water treatment, was designed to remove NH₄⁺–N and Mn²⁺ simultaneously. This study aimed to control the aeration time in the BAF system for simultaneous NH₄⁺–N and Mn²⁺ removal to achieve the Malaysian effluent quality regulation for drinking water. The experiment was conducted under four strategies of S1, S2, S3 and S4. The results demonstrated that acceptable levels of NH₄⁺–N and Mn²⁺ were achieved over a 6 h aeration period (S1), producing effluent concentrations of 0.7 mg/L (93.2% removal) and 0.08 mg/L (79.6% removal), respectively. At the initial treatment of S1 and S2, the dissolved oxygen (DO) level rapidly increased until it reached a saturated concentration (6.8 mg/L DO) after 2 h period. Automatic on–off aeration time to maintain 3 mg/L DO set point (S4) resulted with a good effluent quality of NH₄⁺–N and Mn²⁺ compared with the 2 mg/L DO set point (S3) which did not meet the regulated standard limits. Through the automatic on–off aeration time, the saturated and excessive DO levels in the BAF system can be avoided consequently reduce the wastage of energy and electrical consumption for simultaneous NH₄⁺–N and Mn²⁺ removal from drinking water treatment.     

Biosafety Act 2007: Does It Really Protect Bioethical Issues Relating To GMOS

Despite the (serious) global concerns about the safety and genetic stability of genetically modified organisms, the Malaysian National Biosafety Board (NBB) has recently approved the field testing for genetically modified (GM) male mosquitoes. With this development, bioethical issues, which in some respect could adversely impinge on the social, economic and environmental aspects of the society, have surfaced, and these concerns must be addressed by the authorities concerned. In reviewing this application, the National Biosafety Board has followed the requirements of the Biosafety Act 2007, which was created to strike a balance between promoting biotechnology and at the same time protecting against its potential environmental and human health risks in Malaysia. However, the 2007 Act fails to adequately take into account any bioethical issues in spite of the inclusion of a provision on socio-economic consideration. As part of an ongoing doctoral research project, and by way of an instrumental critique of the 2007 Act, the present paper attempts to address the role and function of the Malaysia biosafety legal framework in governing bioethical concerns relating to Genetically Modified Organisms (GMOs) within the current biotechnology background in Malaysia. Additionally, the paper suggests that the ambiguity of the provisions contained within the 2007 Act in governing such concerns, representing wider societal interests and welfare, in some ways might defeat the balancing role that this act was originally intended to fulfil.     

The impact of storm events on a riverbed system and its hydraulic conductivity at a site of induced infiltration

The spatial and temporal variability of riverbed vertical hydraulic conductivity (K(v)) was investigated at a site of induced infiltration, associated with a municipal well field, to assess the impact of high-stage events on scour and subsequently the riverbed K(v). Such impacts are important when considering the potential loss of riverbank filtration capacity due to storm events. The study site, in and along the Great Miami River in southwest Ohio, overlaid a highly productive glacial-outwash aquifer. A three-layer model for this system was conceptualized: a top layer of transient sediment, a second layer comprising large sediment resistant to scour, but clogged with finer sediment (the armor/colmation layer), and a third layer that was transitional to the underlying higher-K(v) aquifer. One location was studied in detail to confirm and quantify the conceptual model. Methods included seepage meters, heat-flow modeling, grain-size analyses, laboratory permeameter tests, slug tests and the use of scour chains and pressure-load cells to directly measure the amount of sediment scour and re-deposition. Seepage meter measured riverbed K(v) ranged from 0.017 to 1.7 m/d with a geometric mean of 0.19 m/d. Heat-transport model-calibrated estimates were even lower, ranging from 0.0061 to 0.046 m/d with a mean of 0.017 m/d. The relatively low K(v) was indicative of the clogged armor layer. In contrast, slug tests in the underlying riverbed sediment yielded K(v) values an order of magnitude greater. There was a linear relationship between scour chain measured scour and event intensity with a maximum scour of only 0.098 m. Load-cell pressure sensor data over a 7-month period indicated a total sediment-height fluctuation of 0.42 m and a maximum storm-event scour of 0.28 m. Scour data indicated that the assumed armor/colmation layer almost always remained intact. Based on measured layer conductivities and thicknesses, the overall K(v) of this conceptualized system was 1.6 m/d. Sensitivity analyses indicated that even complete scour of the armor/colmation layer would likely increase the overall K(v) only by a factor of 1.5. Most scour events observed removed only the transient sediment, having very little effect on the entire system indicating low risk of losing filtration capacity during storms. The research, however, focused on the point bar, depositional side of the river. More research of the entire river profile is necessary.     

Evaluation of mentum deformities of Chironomus spp. (Chironomidae: Diptera) larvae using modified toxic score index (MTSI) to assess the environmental stress in Juru River Basin, Penang, Malaysia

Morphological mentum deformities which represent sublethal effect of exposure to different types of pollutants were evaluated in Chironomus spp. larvae inhabiting three polluted rivers of Juru River Basin in northwestern peninsular Malaysia. Using mentum deformity incidences, the modified toxic score index (MTSI) was developed based on Lenat??s toxic score index (TSI). The suggested MTSI was compared with TSI in terms of its effectiveness to identify different pollutants including heavy metals. The MTSI showed stronger relationship to total deformity incidence expressed as percentage. Additionally, the multivariate RDA model showed higher capability of MTSI to explain the variations in heavy metal contents of the river sediments. The MTSI was recommended in bioassessment of water and sediment quality using the mentum deformities of Chironomus spp. larvae from aquatic ecosystems receiving anthropogenic, agricultural, or industrial discharges.     

Composition and distribution of surfactants around Lake Chini,Malaysia

This study aims to determine the composition of surfactants in the lake surface microlayer, rainwater, and atmospheric aerosols in the area surrounding Lake Chini, Pahang. Surfactants in the lake surface microlayer were taken from seven different stations around the lake, while samples of rainwater were taken from five different sampling stations. The samples of atmospheric aerosols were collected from the Lake Chini Research Centre which is in close proximity to the lake. The colorimetric analysis method was used to determine the composition and concentration of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as disulphine blue active substances (DBAS). The concentration of anionic surfactants, as MBAS, in the surface microlayer ranged between 0.08 to 0.23 μmol L^− 1, while the range of concentration of cationic surfactants as DBAS ranged from 0.09 to 0.11 μmol L^− 1. The concentration of MBAS was higher in rainwater when compared to surfactants in the lake surface microlayer. The high concentration of surfactants in the fine mode of atmospheric aerosols suggests that natural and anthropogenic sources of surfactants contribute to the atmospheric surfactants.