Changes in biochemical and fatty acid composition of the razor clam <Emphasis Type="Italic">Solen marginatus</Emphasis> (Solenidae: Bivalvia) during larval development

Aquaculture studies have revealed that polyunsaturated fatty acids are critical for maintaining substantial growth, survival and reproductive rates, and high food conversion efficiencies for a wide variety of marine and freshwater organisms. The aim of this study was to investigate the gross biochemical and fatty acid composition of both neutral and polar lipid compartments of the razor clam Solen marginatus throughout embryonic and larval development. High levels of stored reserves in S. marginatus eggs allow a short larval development, lasting only 8 days. The energy required for embryogenesis was obtained from stored proteins. During larval development from D-shaped veliger until settlement, protein, lipid, and carbohydrate reserves were indistinctly stored for metamorphosis. Although total lipids increased, fatty acids in both neutral and polar lipids decreased during embryonic development. The depots allow a short larval development in which settlement is reached with lower amounts of stored neutral and polar lipids than the contents found in the oocytes. Non-methylene-interrupted dienoic fatty acid levels were similar to those of some polyunsaturated fatty acids, with increasing percentages at the onset of metamorphosis. This study indicates that S. marginatus exhibits a different pattern in the use of gross biochemical and fatty acid reserves during larval development compared to other razor clam and bivalve species, mainly due to the large size of its eggs and the short larval development stage reported in this species.     

An innovative statistical approach for analysing non-continuous variables in environmental monitoring: assessing temporal trends of TBT pollution

The current work presents an innovative statistical approach to model ordinal variables in environmental monitoring studies. An ordinal variable has values that can only be compared as "less", "equal" or "greater" and it is not possible to have information about the size of the difference between two particular values. The example of ordinal variable under this study is the vas deferens sequence (VDS) used in imposex (superimposition of male sexual characters onto prosobranch females) field assessment programmes for monitoring tributyltin (TBT) pollution. The statistical methodology presented here is the ordered logit regression model. It assumes that the VDS is an ordinal variable whose values match up a process of imposex development that can be considered continuous in both biological and statistical senses and can be described by a latent non-observable continuous variable. This model was applied to the case study of Nucella lapillus imposex monitoring surveys conducted in the Portuguese coast between 2003 and 2008 to evaluate the temporal evolution of TBT pollution in this country. In order to produce more reliable conclusions, the proposed model includes covariates that may influence the imposex response besides TBT (e.g. the shell size). The model also provides an analysis of the environmental risk associated to TBT pollution by estimating the probability of the occurrence of females with VDS ≥ 2 in each year, according to OSPAR criteria. We consider that the proposed application of this statistical methodology has a great potential in environmental monitoring whenever there is the need to model variables that can only be assessed through an ordinal scale of values.     

Evaluation of the Impact of Acid Mine Drainage on the Chemistry and the Macrobenthos in the Carolina Stream (San Luis – Argentina)

The purpose of this study was to evaluate the impact of acid mine drainage on the chemistry and the macrobenthos of the Carolina stream (San Luis – Argentina). Samples were obtained in the years 1997–1998 at two sites: site C₁, located 200 m upstream of the drainage, and site C₂, located 800 m downstream. The system buffer capacity was evaluated in the non – contaminated site by means of the buffer index calculation. The physico – chemical changes observed as a consequence of the contribution of acid mine drainage (AMD) were: a decreasing of pH and an increase in the ionic concentration, especially sulfate and Fe coming from the oxidation produced by chemiolithotrophic bacteria. The values obtained indicated a low buffer capacity and a high intrinsic vulnerability of the system to resist the impact originated by the AMD, producing a remarkable decreasing of pH of the receiving stream. These changes caused modifications in the original benthic community that was replaced by organisms more tolerant to the acid stress. A reduction in the abundance and in the taxonomic richness of the benthic macroinvertebrates was observed when compared with the reference station. An increase in the proportion of Chironomidae and of Acari and a decrease in the proportion of the remaining taxa were observed. The most sensitive groups were Ephemeroptera, Trichoptera and Mollusca. The community was mostly affected by the following variables: pH, conductivity, sulfate and dissolved total Fe.     

Health Survey Among People Living Near an Abandoned Mine. A Case Study: Jales Mine, Portugal

Campo de Jales is a village surrounding the abandoned Jales mine. The area is heavily contaminated with heavy metals and dusts from large tailings piles as result of centuries of mining operations. The aim of this study is to investigate potential health threats associated with site contamination. The population studied comprised two groups: people living in Campo de Jales (n = 229) and a control group – people living in Vilar de Macada (n = 234). Lead and cadmium exposure and symptoms survey were carried out.The results showed a significant higher levels of blood lead and cadmium between the Campo de Jales residents (lead: 9.5 microgr/dl versus 7.7 microgr/dl; cadmium: 0.84 microgr/dl versus 0,65 microgr/dl) as well as to a higher prevalence of respiratory and irritation symptoms and great concern about his own health.In conclusion: community is the scene of long-term health problems resulting from the site environmental contamination.     

Influence of the operation conditions on CO2 capture by CaO-derived sorbents prepared from synthetic CaCO3

In this work, a statistical experimental design is performed in order to prepare CaCO₃ materials for use as CaO-based CO₂ sorbent precursors. The influence of different operational parameters such as synthesis temperature (ST), stirring rate (SR) and surfactant percent (SP) on CO₂ capture is studied by applying Response Surface Methodology (RSM). The samples were characterized using different analytical techniques including X-ray diffraction, N₂ adsorption isotherm analysis and Scanning Electron Microscopy–X-ray Energy Dispersive Spectroscopy (SEM-EDX). CO₂ capture capacity was determined by means of a thermogravimetric analyzer which recorded the mass uptake of the samples when these were exposed to a gas stream containing diluted (15%) CO₂. The statistical approach used in this work provides a rapid way of predicting and optimizing the main preparation variables of CaO-derived sorbents for CO₂ sorption. The results obtained clearly indicate that four parameters statistically influence CO₂ uptake: SR, the square of SR, its interaction with SP and the square of SP.     

Rose Bengal‐sensitized photooxygenation of chlorohydroxyaromatic contaminants in water: A kinetic study

A kinetic study of the RB‐sensitized photooxygenation of a series of chlorohydroxyaromatic (ClArOH) water contaminants (phenolic and dihydroxybenzene derivatives) has been carried out. In addition, an exhaustive study on the possible interactions of RB electronically excited triplet and singlet states with ClArOH was also developed. The determination of relative rates of oxygen uptake upon sensitized irradiation, employing auxiliar selective quenchers of oxygen active species, indicate the contribution of both singlet molecular oxygen (ca. 71%) and Superoxide ion (ca. 26%) as the reactive pathways for ClArOH degradation. The substitution by chlorine atoms in position meta greatly decrease the photooxygenation rate of the phenolic derivatives. For the dihydroxybenzene series, increase in nuclear chlorination parallels a decrease in the photodegradation rate.

Outdoors sensitized solar irradiation experiments on different ClArOH mixtures leads to measurable levels of oxygen after a few minutes exposure. From the environmental point of view, and ruling out the possibility of direct‐irradiation photoreactions, sensitized photooxygenation appears as an alternative pathway for ClArOH degradation, in competence with other naturally‐occurring photoprocesses involving reactive transient species.     

Characterization of spent AA household alkaline batteries

The aim of this work is identification of the structural components of actual domestic spent alkaline AA batteries, as well as quantification of some of their characteristics. Weight, humidity, ash content, zinc and zinc oxide on anode, manganese on cathode and other metals, potassium hydroxide on the internal components and heating values for papers, anode and cathode were determined in several batteries. As expected, cathode, anode and the steel can container are the main contributors to the 23.5 g average weight of the batteries. Cathode is also the major contributor to the positive heating value of the batteries as well as to the heavy metals content. Mercury was detected in very low levels in these mercury-free batteries. Zinc and zinc oxide amounts in the anodes are highly variable. Results obtained were compared to information on alkaline batteries in the literature from 1993 to 1995; and a positive evolution in their manufacture is readily apparent. Data from the producer of batteries shows some small discrepancies relative to the results of this experimental work.     

Characterisation of volatile organic compounds and polycyclic aromatic hydrocarbons in the ambient air of steelworks

Investigations have been undertaken at two integrated steelworks in the UK to characterise airborne organic micro-pollutants and to assess the contribution of iron ore sintering and coke making operations on the air quality. Concentrations of volatile organic compounds (VOCs), namely benzene, toluene and p-xylene, were measured continuously within the boundary of a coking plant using for the first time differential optical absorption spectrometry (DOAS) between 2004 and 2006. Concentrations were obtained along two monitoring paths surrounding the coke plant and the average benzene concentration measured along both paths over the campaign was 28 μg m^?3. Highest benzene concentrations were associated with winds downwind of the coke oven batteries. Concentrations of polycyclic aromatic hydrocarbons (PAHs) in ambient air were measured during 27 consecutive days in 2005 at three different locations on an integrated steelworks. PAH profiles were determined for each sampling point and compared to coke oven and sinter plant emission profiles showing an impact from the steelworks. The mean benzo [a] pyrene concentration determined in the immediate vicinity of the coke ovens downwind from the battery was 19 ng m^?3, whereas for the two other sites average benzo [a] pyrene concentrations were much lower (around 1 ng m^?3). Data were analysed using principal components analysis (PCA) and results showed that coke making and iron ore sintering were responsible for most of the variation in the PAH concentrations in the vicinity of the investigated plant.     

Cylinder cyclone (LARCODEMS) density media separation of plastic wastes

Cylindrical cyclone media separators using a suspended calcite separation media simulating industrial scale operations are demonstrated to effectively separate a wide variety of forms and a greater range of particle sizes of plastics by density than presently recycled. Purities of plastic products and recoveries obtained from mixed plastic wastes are comparable to those reported for established separations. Products of ≈100% purity with recoveries of >99% were obtained for high density fractions and >98% purities and recoveries for the low density fractions. Cyclonic centrifugal forces and/or the fine particle size of the separation media appear to minimize hydroscopic and particle shape effects.A mathematical model is proposed for defining plastic waste feed rates and treatable particle size ranges for the LARCODEMS media separator.Waste plastic separations yielded Ecart probable (Ep) values ?0.024 for a water only separation media. The Ep for 1.1 g cm^?3 separation medias was <0.032 with minimal to no variation in values for 1–8 mm particle sizes. Variation in the quality of separations is shown to be minimal with <72 μm, <45 μm and <2 μm media particle sizes. Media density offset created varied according to particle size.     

Prevention of chloridazon and metribuzin pollution using lignin-based formulations

The herbicides chloridazon and metribuzin, identified as groundwater pollutants, were incorporated in lignin-based granules with different sizes to obtain controlled release formulations (CRFs) and reduce water pollution risk. Kinetics release tests in water and soil showed that the release rate of both from CRFs diminished in comparison to technical products. A linear correlation was obtained between the time taken for 50% of the active ingredient to be released (T₅₀) into water and granule size of the CRFs. Besides, a linear correlation was reached between T₅₀ values in water and soil. Mobility experiments carried out in calcareous soil show that the use of lignin-based CRFs reduces the presence of both herbicides in the leachate compared to the technical grade products. The set of experiments developed in this research can be useful to design, prepare and evaluate formulations with CR properties which can reduce the pollution derived from the use of herbicides.