Survival of Respiratory Viruses on Fresh Produce

In addition to enteric viruses of fecal origin, emerging zoonotic viruses such as respiratory coronaviruses and influenza viruses may potentially be transmitted via contaminated foods. The goal of this study was to determine the recovery efficiencies and the survival of two respiratory viruses, namely, adenovirus 2 (Ad2) and coronavirus 229E (CoV229E), on fresh produce in comparison to the enteric poliovirus 1 (PV1). Adenovirus was recovered with efficiencies of 56.5, 31.8, and 34.8 % from lettuce, strawberries, and raspberries, respectively. Coronavirus was recovered from lettuce with an efficiency of 19.6 % yet could not be recovered from strawberries. Poliovirus was recovered with efficiencies of 76.7 % from lettuce, but only 0.06 % from strawberries. For comparison purposes, the survival of Ad2, CoV229E, and PV1 was determined for periods up to 10 days on produce. The enteric PV1 survived better than both respiratory viruses on lettuce and strawberries, with only ≤1.03 log₁₀ reductions after 10 days of storage at 4 °C compared to CoV229E not being recovered after 4 days on lettuce and reductions of 1.97 log₁₀ and 2.38 log₁₀ of Ad2 on lettuce and strawberries, respectively, after 10 days. Nevertheless, these respiratory viruses were able to survive for at least several days on produce. There is therefore the potential for transfer to the hands and subsequently to the mucosa via rubbing the eyes or nose. In addition, some respiratory coronaviruses (e.g., severe acute respiratory syndrome coronavirus) and adenoviruses are also capable of replication in the gut and there is thus some potential for acquisition through the consumption of contaminated produce.     

Total organic halogen (TOX) in human urine: A halogen-specific method for human exposure studies

Disinfection by-products(DBPs) are a complex mixture of compounds unintentionally formed as a result of disinfection processes used to treat drinking water. Effects of long-term exposure to DBPs are mostly unknown and were the subject of recent epidemiological studies. However,most bioanalytical methods focus on a select few DBPs. In this study, a new comprehensive bioanalytical method has been developed that can quantify mixtures of organic halogenated compounds, including DBPs, in human urine as total organic chlorine(TOCl), total organic bromine(TOBr), and total organic iodine(TOI). The optimized method consists of urine dilution, adsorption to activated carbon, pyrolysis of activated carbon, absorption of gases in an aqueous solution, and halide analysis with ion chromatography and inductively coupled plasma-mass spectrometry. Spike recoveries for TOCl, TOBr, and TOI measurements ranged between 78% and 99%. Average TOCl, TOBr, and TOI concentrations in five urine samples from volunteers who consumed tap water were 1850, 82, and 21.0 μg/L as X~-, respectively.Volunteers who consumed spring water(control) had TOCl, TOBr, and TOI average concentrations in urine of 1090, 88, and 10.3 μg/L as X~-, respectively. TOCl and TOI in the urine samples from tap water consumers were higher than the control. However, TOBr was slightly lower in tap water urine samples compared to mineral water urine samples, indicating other sources of environmental exposure other than drinking water. A larger sample population that consumes tap water from different cities and mineral water is needed to determine TOCl, TOBr, and TOI exposure from drinking water.     

Photodegradation of atrazine and ametryn with visible light using water soluble porphyrins as sensitizers

The photodegradation of the herbicides atrazine and ametryn with visible light in aerated neutral aqueous solutions and 5, 10, 15, 20-tetrakis (2,6-dichloro-3-sulfophenyl) porphyrin or 5, 10, 15, 20-tetrakis (4-sulfophenyl) porphyrin as sensitizers are reported for the first time. Our findings show that the degradation percentage reached 30% for atrazine and 63% for ametryn. The final photoproducts were characterized as dealkylated s-triazines. Photolysis of the pesticides in the presence of a singlet oxygen quencher showed only a minor contribution of this type of mechanism, while a bimolecular quenching reaction between the triplet state of the sensitizer and the pesticides is excluded by flash photolysis studies. It is proposed that the mechanism may involve the formation of a superoxide radical anion from the triplet state of the sensitizer and molecular oxygen, followed by a radical decomposition pathway. Selected article from 1st International Meeting on Photochemistry, Photocatalysis and Environmental Applications, Agadir, 2006, organised by Prof. Dr. Ait Ichou, University Ibn Zohr, Agadir, Morocco     

Terrestrial avoidance behaviour tests as screening tool to assess soil contamination

To assess soil quality and risk assessment, bioassays can be useful tools to gauge the potential toxicity of contaminants focusing on their bioavailable fraction. A rapid and sublethal avoidance behaviour test was used as a screening tool with the earthworm Eisenia andrei and the isopod Porcellionides pruinosus, where organisms were exposed during 48 h to several chemicals (lindane, dimethoate and copper sulphate, for isopods and carbendazim, benomyl, dimethoate and copper sulphate for earthworms). Both species were also exposed to soils from an abandoned mine. For all bioassays a statistical approach was used to derive EC50 values. Isopods and earthworms were able to perceive the presence of toxic compounds and escaping from contaminated to clean soil. Furthermore the behaviour parameter was equally or more sensitive then other sublethal parameters (e.g. reproduction or growth), expressing the advantages of Avoidance Behaviour Tests as screening tools in ERA.     

Laboratory study on the behaviour of spent AA household alkaline batteries in incineration

The quantitative evaluation of emissions from incineration is essential when Life Cycle Assessment (LCA) studies consider this process as an end-of-life solution for some wastes. Thus, the objective of this work is to quantify the main gaseous emissions produced when spent AA alkaline batteries are incinerated. With this aim, batteries were kept for 1h at 1273K in a refractory steel tube hold in a horizontal electric furnace with temperature control. At one end of the refractory steel tube, a constant air flow input assures the presence of oxygen in the atmosphere and guides the gaseous emissions to a filter system followed by a set of two bubbler flasks having an aqueous solution of 10% (v/v) nitric acid. After each set of experiments, sulphur, chlorides and metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, Tl and Zn) were analyzed in both the solutions obtained from the steel tube washing and from the bubblers. Sulphur, chlorides and metals were quantified, respectively, using barium sulfate gravimetry, the Volhard method and atomic absorption spectrometry (AAS). The emissions of zinc, the most emitted metal, represent about 6.5% of the zinc content in the batteries. Emissions of manganese (whose oxide is the main component of the cathode) and iron (from the cathode collector) are negligible when compared with their amount in AA alkaline batteries. Mercury is the metal with higher volatility in the composition of the batteries and was collected even in the second bubbler flask. The amount of chlorides collected corresponds to about 36% of the chlorine in the battery sleeve that is made from PVC. A considerable part of the HCl formed in PVC plastic sleeve incineration is neutralized with KOH, zinc and manganese oxides and, thus, it is not totally released in the gas. Some of the emissions are predictable through a thermodynamic data analysis at temperatures in the range of 1200-1300K taking into account the composition of the batteries. This analysis was done for most of potential reactions between components in the batteries as well as between them and the surrounding atmosphere and it reasonably agrees the experimental results. The results obtained show the role of alkaline batteries at the acid gases cleaning process, through the neutralization reactions of some of their components. Therefore, LCA of spent AA alkaline batteries at the municipal solid waste (MSW) incineration process must consider this contribution.     

Single-cell sequencing and mini-sequencing for preimplantation genetic diagnosis

There is increasing interest in the use of preimplantation genetic diagnosis (PGD) as an alternative to routine prenatal diagnosis. However, the costs associated with development and testing of new PGD protocols have forced some PGD centres to limit the number of diseases for which PGD is offered. One of the main factors in the design of new protocols, which affects cost and accuracy, is the choice of the mutation-detection technique. We have assessed the reliability of DNA sequencing and mini-sequencing for clinical diagnosis at the single-cell level and have found them to be rapid and accurate. Extensive optimisation for individual mutations is not usually necessary when employing these versatile techniques and consequently a smaller investment of time and resources should be required during development of new protocols. Additionally, we report single-cell protocols for the diagnoses of cystic fibrosis, sickle cell anaemia and β-thalassaemia, which utilise mini-sequencing. Unlike most mutation-detection techniques, mini-sequencing permits analysis of very small DNA fragments. Small amplicons experience low allele dropout (ADO) rates, and consequently this approach could potentially improve the reliability of PGD. Copyright © 2003 John Wiley & Sons, Ltd.     

How to evaluate models: Observed vs. predicted or predicted vs. observed?

A common and simple approach to evaluate models is to regress predicted vs. observed values (or vice versa) and compare slope and intercept parameters against the 1:1 line. However, based on a review of the literature it seems to be no consensus on which variable (predicted or observed) should be placed in each axis. Although some researchers think that it is identical, probably because r² is the same for both regressions, the intercept and the slope of each regression differ and, in turn, may change the result of the model evaluation. We present mathematical evidence showing that the regression of predicted (in the y-axis) vs. observed data (in the x-axis) (PO) to evaluate models is incorrect and should lead to an erroneous estimate of the slope and intercept. In other words, a spurious effect is added to the regression parameters when regressing PO values and comparing them against the 1:1 line. Observed (in the y-axis) vs. predicted (in the x-axis) (OP) regressions should be used instead. We also show in an example from the literature that both approaches produce significantly different results that may change the conclusions of the model evaluation.     

Modelling the influence of peri-urban trees in the air quality of Madrid region (Spain)

Tropospheric ozone (O(3)) is considered one of the most important air pollutants affecting human health. The role of peri-urban vegetation in modifying O(3) concentrations has been analyzed in the Madrid region (Spain) using the V200603par-rc1 version of the CHIMERE air quality model. The 3.7 version of the MM5 meteorological model was used to provide meteorological input data to the CHIMERE. The emissions were derived from the EMEP database for 2003. Land use data and the stomatal conductance model included in CHIMERE were modified according to the latest information available for the study area. Two cases were considered for the period April-September 2003: (1) actual land use and (2) a fictitious scenario where El Pardo peri-urban forest was converted to bare-soil. The results show that El Pardo forest constitutes a sink of O(3) since removing this green area increased O(3) levels over the modified area and over down-wind surrounding areas.     

Analysis of the usefulness of biological parameters for the control of activated sludge wastewater treatment plants in an interlaboratory study context

The quality of the sludge in Wastewater Treatment Plants (WWTPs) depends on the suitable colonization of the flocs by microorganisms. Due to the functional importance of these biological constituents, several biological or biological-related parameters have been commonly used for the control of depuration efficiency. According to national and international water regulation recommendations, interlaboratory studies have a great relevance to determine which parameters are more reliable for their extensive application in routine control. However, these studies are also very useful to demonstrate consistency in results from multiple laboratories and to develop reliable and reproducible methodologies which might be necessary for protocol validation and also for accreditation issues to meet regulatory environmental requirements. The main purpose of this work was to assess the results obtained in consecutive interlaboratory assays in order to determine the concordance degree in the application of biological parameters by participating laboratories. Following the international recommendations about these studies, a common working protocol was proposed. Statistical tests indicated that Sludge Index and several routine physical-chemical analyses [V30, Mixed Liquor Suspended Solids (MLSS), Mixed Liquor Volatile Solids (MLVS) and Sludge Volumetric Index (SVI)] show low variability and therefore are suitable tools for laboratory control. Shannon Index and Sludge Biotic Index also presented low variability although a more precise protocol would be necessary, in particular the methodology to count small flagellates. The abundance and identification of protist species showed low concordance among laboratories and three factors were responsible for the low reliability of data: population density, size and morphological distinguishable characters of the specimens.     

Design and first experimental results of a bubbling fluidized bed for air gasification of plastic waste

Plastic wastes have an especially high potential for use as alternative fuels, considering their high heating value and their large and stable availability. They could be used in electricity production based on gasification technologies, wherein electricity is produced in engines by means of the conversion of plastic wastes into a valuable gas. However, there are still some technical barriers to overcome before this technology can access the commercial stage, and further scientific research is needed to gain deeper understanding of the process and to be able to control and optimize it. This research presents the design and first experimental results of a bubbling fluidized bed gasifier conceived for the gasification of actual plastic residues. The experimental tests revealed that the selection and design of the reactor were adequate and proved some of the advantages of using plastic as a fuel, related in part to the absence of ashes and char. A valuable syngas over 5 MJ/m³ was generated, which contained a considerable fraction of methane as well as hydrogen and carbon monoxide as main combustible gases. The highest efficiency was achieved when the equivalence ratio was increased to 0.35, reaching 61 % in terms of cold gas efficiency and 66 % carbon conversion.