Body mass estimations for <Emphasis Type="Italic">Plateosaurus engelhardti</Emphasis> using laser scanning and 3D reconstruction methods

Both body mass and surface area are factors determining the essence of any living organism. This should also hold true for an extinct organism such as a dinosaur. The present report discusses the use of a new 3D laser scanner method to establish body masses and surface areas of an Asian elephant (Zoological Museum of Copenhagen, Denmark) and of Plateosaurus engelhardti, a prosauropod from the Upper Triassic, exhibited at the Paleontological Museum in Tübingen (Germany). This method was used to study the effect that slight changes in body shape had on body mass for P. engelhardti. It was established that body volumes varied between 0.79 m³ (slim version) and 1.14 m³ (robust version), resulting in a presumable body mass of 630 and 912 kg, respectively. The total body surface areas ranged between 8.8 and 10.2 m², of which, in both reconstructions of P. engelhardti, ∼33% account for the thorax area alone. The main difference between the two models is in the tail and hind limb reconstruction. The tail of the slim version has a surface area of 1.98 m², whereas that of the robust version has a surface area of 2.73 m². The body volumes calculated for the slim version were as follows: head 0.006 m³, neck 0.016 m³, fore limbs 0.020 m³, hind limbs 0.08 m³, thoracic cavity 0.533 m³, and tail 0.136 m³. For the robust model, the following volumes were established: 0.01 m³ head, neck 0.026 m³, fore limbs 0.025 m³, hind limbs 0.18 m³, thoracic cavity 0.616 m³, and finally, tail 0.28 m³. Based on these body volumes, scaling equations were used to assess the size that the organs of this extinct dinosaur have.     

Prenatal cannibalism in an insect

Host selection and infection strategies of parasitoids often correlate with high parental investment and low numbers of progeny. In this study, we investigate how additional internal mechanisms might shape brood size and fitness of the offspring. Emblemasoma auditrix is a parasitoid fly in which about 38 larvae hatch simultaneously in utero. After host location, a single larva is deposited into the host, where it rapidly develops and pupates after about 5 days. The search for hosts can take several weeks, and during that time, the larvae arrest their development and remain in the first larval instar. Nevertheless, the larvae increase in weight within the uterus, and this growth correlates to a decrease in the number of larvae, although no larvae are deposited. Thus, our data indicate a first case of prenatal cannibalism in an invertebrate with larvae feeding on each other within the uterus of the adult.     

First Castorid (Mammalia,Rodentia) from the Middle Miocene of Southeast Asia

Today and in the Tertiary, the geographical distribution of castorids is limited throughout all of the northern continents. Fossils of the Castoridae genus Steneofiber are abundant in many localities of Eurasia from the late Oligocene to Pliocene period. Recently, Steneofiber fossils were discovered in two localities of northern Thailand, Mae Moh and Chiang Muan coal mines, in layers of late middle Miocene age. These discoveries represent the first records of castorids from Southeast Asia and correspond to their southernmost known range. The focus of this study is to describe this new Thai species of Steneofiber and to define its wear stages from the molar occlusal surfaces by using micro-CT scan analysis. The CT scan technique permits the analysis of the virtual occlusal surface changes from wear, allowing easier comparison to related species of Steneofiber cheek teeth without destroying the teeth. The new species, Steneofiber siamensis n. sp., can be distinguished from the other species of Steneofiber by several distinct characters, longer mesostriid on p4, presence of premesostria and metastria on P4, which are smaller than most of the other known species. The occurrence of this new castorid also supports a subtropical to tropical paleoclimate for these two localities of northern Thailand.     

An individual and a sex odor signature in kittiwakes? Study of the semiochemical composition of preen secretion and preen down feathers

The importance of olfaction in birds’ social behavior has long been denied. Avian chemical signaling has thus been relatively unexplored. The black-legged kittiwake provides a particularly appropriate model for investigating this topic. Kittiwakes preferentially mate with genetically dissimilar individuals, but the cues used to assess genetic characteristics remain unknown. As in other vertebrates, their body odors may carry individual and sexual signatures thus potentially reliably signaling individual genetic makeup. Here, we test whether body odors in preen gland secretion and preen down feathers in kittiwakes may provide a sex and an individual signature. Using gas chromatography and mass spectrometry, we found that male and female odors differ quantitatively, suggesting that scent may be one of the multiple cues used by birds to discriminate between sexes. We further detected an individual signature in the volatile and nonvolatile fractions of preen secretion and preen down feathers. These results suggest that kittiwake body odor may function as a signal associated with mate recognition. It further suggests that preen odor might broadcast the genetic makeup of individuals, and could be used in mate choice to assess the genetic compatibility of potential mates.     

The impact of agroforestry combined with water harvesting on soil carbon and nitrogen stocks in central Chile evaluated using the ICBM/N model

Soil organic carbon (SOC) and total nitrogen (N) stocks in an agroforestry system with water harvesting were analysed in a field experiment and the results compared with those of other crop management systems in the Mediterranean zone of central Chile. Agroforestry with water harvesting showed higher positive effects on N stocks, mainly in the upper soil layer, than the other crop management systems. However, soil analysis revealed a lack of differences between treatments, a fact that might be related mainly to the short study time (12 years) and the high spatial variability in these soil properties at the experimental site. In addition, the Introductory Carbon Balance Model that simulates N processes (ICBM/N) was evaluated for simulating trends in SOC and N stocks in the field experiment. Soil data collected between 1996 and 2008 in the field experiment and primarily literature data sets were used to test ICBM/N and its performance was evaluated by considering uncertainty in model inputs using Generalised Likelihood Uncertainty Estimation (GLUE) methodology. The GLUE estimates (5% and 95%) and measured SOC and N stocks were in satisfactory agreement. The observed SOC and N stocks were bracketed by the uncertainty bands in 70% and 80% of the simulations, respectively. Sensitivity analysis showed the model to be most sensitive to C parameters, such as the humification coefficient (h). The results of this study show that ICBM/N can be an effective tool for estimating SOC and N stocks from agroforestry combined with water harvesting systems in the Mediterranean zone of central Chile over the medium term. However, they also indicate that additional data sets are needed to redefine the parameter distributions in the model and thus to predict trends in SOC and N stocks in the future.     

Anatomical localization and stereoisomeric composition of <Emphasis Type="Italic">Tribolium castaneum</Emphasis> aggregation pheromones

We report that the abdominal epidermis and associated tissues are the predominant sources of male-produced pheromones in the red flour beetle, Tribolium castaneum and, for the first time, describe the stereoisomeric composition of the natural blend of isomers of the aggregation pheromone 4,8-dimethyldecanal (DMD) in this important pest species. Quantitative analyses via gas chromatography–mass spectrometry showed that the average amount of DMD released daily by single feeding males of T. castaneum was 878 ± 72 ng (SE). Analysis of different body parts identified the abdominal epidermis as the major source of aggregation pheromone; the thorax was a minor source, while no DMD was detectable in the head. No internal organs or obvious male-specific glands were associated with pheromone deposition. Complete separation of all four stereoisomers of DMD was achieved following oxidation to the corresponding acid, derivatization with (1R, 2R)- and (1S, 2S)-2-(anthracene-2,3-dicarboximido)cyclohexanol to diastereomeric esters, and their separation on reversed-phase high-performance liquid chromatography at −54°C. Analysis of the hexane eluate from Porapak-Q-collected volatiles from feeding males revealed the presence of all four isomers (4R,8R)/(4R,8S)/(4S,8R)/(4S,8S) at a ratio of approximately 4:4:1:1. A walking orientation bioassay in a wind tunnel with various blends of the four synthetic isomers further indicated that the attractive potency of the reconstituted natural blend of 4:4:1:1 was equivalent to that of the natural pheromone and greater than that of the 1:1 blend of (4R,8R)/(4R,8S) used in commercial lures.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

A review of research on the environmental impact of e-business and ICT

This paper attempts to provide a review of the current state of the art of how e-business/ICT affects the environment. The work reviewed is in various forms including journal papers and thesis which have been peer-reviewed, as well as other resources such as projects and project reports, conference and symposia, and websites. It is claimed that the research examined has captured the most important work to date, either for a general knowledge of this new area or for background study by experts carrying out future research. The review has found that the currently dominant approach is either a micro-level case study approach or a macro-level statistical approach. It is concluded that a more predictive and empirical model, which can be applied within a sector of society, should be more beneficial in the long term. This approach should help simulate potential impacts resulting from changes of indicators, so that positive effects can be promoted and negative ones alleviated proactively, rather than knowing and accepting outcomes passively.     

Models for waste life cycle assessment: Review of technical assumptions

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing waste LCA models.This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely on geographic specificities that have an impact on the results of waste LCA models. The review concludes that more effort should be employed to harmonise and validate non-geographic assumptions to strengthen waste LCA modelling.     

A phenomenological approach shows a high coherence of warming patterns in dimictic aquatic systems across latitude

To predict the coherence in local responses to large-scale climatic forcing among aquatic systems, we developed a generalized approach to compare long-term data of dimictic water bodies based on phenomenologically defined hydrographic events. These climate-sensitive phases (inverse stratification, spring overturn, early thermal stratification, summer stagnation) were classified in a dual code (cold/warm) based on threshold temperatures. Accounting for a latitudinal gradient in seasonal timing of phases derived from gradients in cumulative irradiation (2.2?days per degree latitude), we found a high spatial and temporal coherence in warm–cold patterns for six lakes (84?%) and the Baltic Sea (78?%), even when using the same thresholds for all sites. Similarity to CW-codes for the North Sea still was up to 72?%. The approach allows prediction of phase-specific warming trends and resulting instantaneous or time-delayed ecological responses. Exemplarily, we show that warming during early thermal stratification controls food-web-mediated effects on key species during summer.