Chemical-looping with oxygen uncoupling for combustion of solid fuels

Chemical-looping with oxygen uncoupling (CLOU) is a novel method to burn solid fuels in gas-phase oxygen without the need for an energy intensive air separation unit. The carbon dioxide from the combustion is inherently separated from the rest of the flue gases. CLOU is based on chemical-looping combustion (CLC) and involves three steps in two reactors, one air reactor where a metal oxide captures oxygen from the combustion air (step 1), and a fuel reactor where the metal oxide releases oxygen in the gas-phase (step 2) and where this gas-phase oxygen reacts with a fuel (step 3). In other proposed schemes for using chemical-looping combustion of solid fuels there is a need for an intermediate gasification step of the char with steam or carbon dioxide to form reactive gaseous compounds which then react with the oxygen carrier particles. The gasification of char with H₂O and CO₂ is inherently slow, resulting in slow overall rates of reaction. This slow gasification is avoided in the proposed process, since there is no intermediate gasification step needed and the char reacts directly with gas-phase oxygen. The process demands an oxygen carrier which has the ability to react with the oxygen in the combustion air in the air reactor but which decomposes to a reduced metal oxide and gas-phase oxygen in the fuel reactor. Three metal oxide systems with suitable thermodynamic properties have been identified, and a thermal analysis has shown that Mn₂O₃/Mn₃O₄ and CuO/Cu₂O have suitable thermodynamic properties, although Co₃O₄/CoO may also be a possibility. However, the latter system has the disadvantage of an overall endothermic reaction in the fuel reactor. Results from batch laboratory fluidized bed tests with CuO and a gaseous and solid fuel are presented. The reaction rate of petroleum coke is approximately a factor 50 higher using CLOU in comparison to the reaction rate of the same fuel with an iron-based oxygen carrier in normal CLC.     

Carbon budgets for catchments across a managed landscape mosaic in southeast Sweden: contributing to the safety assessment of a nuclear waste repository

Ecosystem budgets of matter contribute to the assessment of transport and accumulation of bioavailable contaminants in a landscape, since flows of matter and energy ultimately determine the rates at which contaminants will be partitioned in the environment. This study compares ecosystem properties, such as net primary production (NPP), sequestration of matter and fluxes to food sources for humans, which are of potential interest to describe fluxes and accumulation of bioavailable radionuclides in 14 catchments within a larger catchment area in southeast Sweden. The carbon budgets, used as a proxy for organic matter, are mainly based on local estimates of pools and fluxes, which have been distributed across a landscape mosaic of different vegetation types and management regimes using a geographical information system (GIS). NPP varied by a factor close to two (432 - 709 g x Cx m(-2)x y(-1)), while net ecosystem production ranged between -124 and 159 gx C x m(-2) x y (-1) for the different catchments. Carbon sequestration mainly occurred in the vegetation while the soil organic carbon pool was mainly a source of carbon. Large herbivores consumed on average 4.5 % of the above-ground green tissue production. When arable land was present in the catchment, the flux of carbon to humans was highest from crops and, in decreasing order, milk and beef, followed by the flux from hunting and berry/fungus picking. The results can be used to estimate the potential assimilation of radionuclides in vegetation and the potential exposure to humans of bioavailable radionuclides.     

Selective supercritical fluid extraction to identify aged sediment-bound PCBs available for uptake by eel

A naturally contaminated sediment was partially extracted with selective supercritical fluid extraction (SFE) to remove a fraction of supposedly bioavailable PCBs from the matrix. Eels (Anguilla anguilla) were cultured in systems with untreated and pre-extracted sediment, respectively, and it was shown that the SFE treatment selectively removed bioavailable PCBs from the sediment, since relative biota-to-sediment accumulation factors (BSAFs) for the eight studied PCB congeners were much lower in the pre-extracted than in the untreated system at the end of the study. Relative BSAF values decreased with about the same relative amount for all eight congeners, independent of the degree of chlorination and the initial concentration in the sediment. The results demonstrate the ability of SFE to selectively remove sediment-bound PCBs that are available for uptake by the eels, thus demonstrating the feasibility of using selective SFE to estimate bioavailability of PCBs in sediments.     

Enhancing resilience to climate shocks through farmer innovation: evidence from northern Ghana

Regional Environmental Change - In this paper, we contribute to recent attempts to operationalize the measurement of climate resilience by measuring household resilience to climate shocks and by...     

Patterns of mercury and methylmercury bioaccumulation in fish species downstream of a long-term mercury-contaminated site in the lower Ebro River (NE Spain)

Since the 19th century, large amounts of industrial waste were dumped in a reservoir adjacent to a chlor-alkali plant in the lower Ebro River (NE Spain). Previous toxicological analysis of carp populations inhabiting the surveyed area have shown that the highest biological impact attributable to mercury pollution occurred downstream of the discharge site. However, mercury speciation in fish from this polluted area has not been addressed yet. Thus, in the present study, piscivorous European catfish (Silurus glanis) and non-piscivorous common carp (Cyprinus carpio) were selected, to investigate the bioavailability and bioaccumulation capacities of both total mercury (THg) and methylmercury (MeHg) at the discharge site and downstream points. Multiple Correspondence Analysis (MCA) was applied to reduce the dimensionality of the data set, and Multiple Linear Regression (MLR) models were fitted in order to assess the relationship between both Hg species in fish and different variables of interest. Mercury levels in fish inhabiting the dam at the discharge site were found to be approximately 2-fold higher than those from an upstream site; while mercury pollution progressively increased downstream of the hot spot. In fact, both THg and MeHg levels at the farthest downstream point were 3 times greater than those close to the waste dump. This result clearly indicates downstream transport and increased mercury bioavailability as a function of distance downstream from the contamination source. A number of factors may affect both the downstream transport and increased Hg bioavailability associated with suspended particulate matter (SPM) and dissolved organic carbon (DOC).     

Precipitation or evapotranspiration? Bayesian analysis of potential error sources in the simulation of sub-basin discharges in the Czech Elbe River basin

A global change assessment required detailed simulation of water availability in the Elbe River basin in Central Europe (148,268?km2). Using the spatially semi-distributed, eco-hydrological model SWIM, spatial calibration was applied. For 225 sub-areas covering the model domain (134,890?km2), evapotranspiration and groundwater dynamics were individually adjusted. The calibration aimed at good correspondences with long-term run-off contributions and the hydrographs for two extreme years. Measured run-off was revised from water management effects to produce quasi-natural discharges for calibration. At some gauges, there were large volume differences between these reference data and the simulations of the spatially uncalibrated model. Most affected were some sub-basins in the Czech part of the basin where the density of available climate stations was much lower than the German part. Thus, both erroneous precipitation data and systematic flaws in the evapotranspiration module of SWIM could have caused the differences. In order to identify the major error source and to validate the choice of spatial calibration parameters (evapotranspiration and groundwater dynamic corrections), MCMC analyses were made for three Czech areas. Optional precipitation correction had been considered by a third calibration parameter in the MCMC assessment. In two of the three cases, it can be shown that evapotranspiration corrections are preferable as precipitation errors are negligible. In the third case, where the analyses indicate a substantial error in precipitation data, an interpolation problem of the climate data at the edge of the model domain could be found. Hence, the applied method shows its potential to identify specific sources of uncertainty in hydrological modelling.     

Energy efficiency of substance and energy recovery of selected waste fractions

In order to reduce the ecological impact of resource exploitation, the EU calls for sustainable options to increase the efficiency and productivity of the utilization of natural resources. This target can only be achieved by considering resource recovery from waste comprehensively. However, waste management measures have to be investigated critically and all aspects of substance-related recycling and energy recovery have to be carefully balanced. This article compares recovery methods for selected waste fractions with regard to their energy efficiency.Whether material recycling or energy recovery is the most energy efficient solution, is a question of particular relevance with regard to the following waste fractions: paper and cardboard, plastics and biowaste and also indirectly metals. For the described material categories material recycling has advantages compared to energy recovery. In accordance with the improved energy efficiency of substance opposed to energy recovery, substance-related recycling causes lower emissions of green house gases.For the fractions paper and cardboard, plastics, biowaste and metals it becomes apparent, that intensification of the separate collection systems in combination with a more intensive use of sorting technologies can increase the extent of material recycling. Collection and sorting systems must be coordinated. The objective of the overall system must be to achieve an optimum of the highest possible recovery rates in combination with a high quality of recyclables.The energy efficiency of substance related recycling of biowaste can be increased by intensifying the use of anaerobic technologies. In order to increase the energy efficiency of the overall system, the energy efficiencies of energy recovery plants must be increased so that the waste unsuitable for substance recycling is recycled or treated with the highest possible energy yield.     

Nineteenth-century land-use legacies affect contemporary land abandonment in the Carpathians

Regional Environmental Change - Historical land use may shape landscapes for centuries into the future, but it remains unclear how much land-use legacies affect contemporary land use. Knowing for...