Site Sampling and Treatability Studies for Demonstration of WasteChem’s Asphalt Encapsulation Technology Under EPA’s SITE Program

ABSTRACT

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5μm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals.

Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors.

This paper describes a preliminary research effort to develop a methodology for the measurement of nonvi-able biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 um were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 um is evidence of fragmentation of larger source particles that are known allergens.     

A framework for assessing the impact of land use policy on community exposure to air toxics

Our research focuses on the linkage between land use planning policy and the spatial pattern of exposure to air toxics emissions. Our objective is to develop a modeling framework for assessment of the community health risk implications of land use policy. The modeling framework is not intended to be a regulatory tool for small-scale land use decisions, but a long-range planning tool to assess the community health risk implications of alternative land use scenarios at a regional or subregional scale. This paper describes the development and application of an air toxic source model for generating aggregate emission factors for industrial and commercial zoning districts as a function of permitted uses. To address the uncertainty of estimating air toxics emission rates for planned general land use or zoning districts, the source model uses an emissions probability mass function that weights each incremental permitted land use activity by the likelihood of occurrence. We thus reduce the uncertainty involved in planning for development with no prior knowledge of the specific industries that may locate within the land use district. These air toxics emission factors can then be used to estimate pollutant atmospheric mass flux from land use zoning districts, which can then be input to air dispersion and human health risk assessment models to simulate the spatial pattern of air toxics exposure risk. The model database was constructed using the California Air Toxics Inventory, 1997 US Economic Census, and land assessment records from several California counties. The database contains information on more than 200 air toxics at the 2-digit Standard Industrial Classification (SIC) level. We present a case study to illustrate application of the model. LUAIRTOX, the interactive spreadsheet model that applies our methodology to the California data, is available at http://www2.bren.ucsb.edu/~mwillis/LUAIRTOX.htm.     

INVESTMENT SEQUENCING RECOGNIZING EXTERNALITIES IN WATER DESALTING1

ABSTRACT. The failure to recognize the learning process in new technologies such as desalting may lead to incorrect water resource investment decisions for two reasons. First, to neglect cost reductions stemming from “learning by doing” implies an overestimation of desalting costs. Second, since learning in a particular plant may result in external (learning) benefits to other plants, these may serve as the basis for a subsidy intended to internalize such benefits. Accordingly, the research reported below includes an estimation of learning functions for desalting and the results of a formulation designed to measure external benefits on the basis of these learning functions. These results are then incorporated into a decision framework for water resource investments which recognizes uncertainty in determining optimal timing of desalting construction.     

Book reviews

The Garden City Utopia

Robert Beevers. The Macmillan Press, 1988. £27.50. 206 pages.

Cost‐Benefit Analysis in Urban and Regional Planning

J. A. Schofield. Allen and Unwin, London, 1987. 249 pages. £30 hardback.

The Milton Park Affair — Canada's largest citizen‐developer confrontation

Claire Helman. Véhicule Press, Montréal, 1987. $12.95.

Regenerating the Inner City, Glasgow's Experience

Edited by David Donnison and Alan Middleton. Routledge & Kegan Paul Ltd., London, 1987. £12.95.

Community Architecture

Nick Wates and Charles Knevitt. Penguin Books, London, 1987. £4.95.     

Does employee safety influence customer satisfaction? Evidence from the electric utility industry

ProblemResearch on workplace safety has not examined implications for business performance outcomes such as customer satisfaction.MethodIn a U.S. electric utility company, we surveyed 821 employees in 20 work groups, and also had access to archival safety data and the results of a customer satisfaction survey (n = 341).ResultsIn geographically-based work units where there were more employee injuries (based on archival records), customers were less satisfied with the service they received. Safety climate, mediated by safety citizenship behaviors (SCBs), added to the predictive power of the group-level model, but these two constructs exerted their influence independently from actual injuries. In combination, two safety-related predictor paths (injuries and climate/SCB) explained 53% of the variance in customer satisfaction.DiscussionResults offer preliminary evidence that workplace safety influences customer satisfaction, suggesting that there are likely spillover effects between the safety environment and the service environment. Additional research will be needed to assess the specific mechanisms that convert employee injuries into palpable results for customers.Impact on IndustryBetter safety climate and reductions in employee injuries have the potential to offer payoffs in terms of what customers experience.     

Coral-spawn slicks in the Great Barrier Reef: preliminary observations

Aerial surveys and surface samples in the spring of 1985, showed that slicks of coral eggs and embryos (coral spawn) formed in large numbers within and between reefs in the Central Great Barrier Reef Region. Coral-spawn slicks appeared on the days immediately following the annual mass multispecific spawning of reef corals. They were white or pink in colour, and were often highly elongate in form extending up to 5 km in length, and 10 m in width. Over 99% of each slick sampled during the surveys consisted of dead eggs, embryos and their breakdown products, which formed dense, highly viscous patches readily recognizable during aerial surveys. Despite the low proportion of live material, the slicks contained high concentrations of live embryos (15 to 230 per litre) which were over two orders of magnitude greater than concentrations in adjacent water masses. The distinctive colour, shape and texture of the coral-spawn slicks generally distinguished them from slicks formed by blooms of the blue-green alga Oscillatoria erythraea, which also occur commonly in the region. Many of the slicks were closely associated with surface oceanographic features, such as fronts between water parcels, and wakes and eddies behind reefs. Although more detailed sampling and surveys are required, these results suggest that it may be possible to track the movements of coral embryos and larvae directly for the first one or two days following mass spawning, and indirectly thereafter by monitoring other surface features.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 1. Stabilization performance of a continuous-flow reactor at low residence time.

There is increasing interest in the United States in producing biosolids from municipal wastewater treatment that meet the criteria for Class A designation established by the U.S. Environmental Protection Agency. Class A biosolids are intended to be free of pathogens and also must meet requirements for reduction of the vector-attraction potential associated with untreated sludge. High-temperature processes are considered to produce Class A biosolids if the combination of operating temperature and treatment time exceeds minimum criteria, but this option is not applicable to mixed, continuous-flow reactors. Such reactors, or any combination of reactors that does not meet the holding time requirement at a specific temperature, must be demonstrated to inactivate pathogens to levels consistent with the Class A criteria. This study was designed to evaluate pathogen inactivation by thermophilic anaerobic digestion in a mixed, continuous-flow reactor followed by batch or plug-flow treatment. In this first of a two-part series, we describe the performance of a continuous-flow laboratory reactor with respect to physical and chemical operating parameters; microbial inactivation in the combined continuous-flow and batch treatment system is described in the second part. Sludges from three different sources were treated at 53 degrees C, while sludge from one of the sources was also treated at 55 and 51 degrees C. Relatively short hydraulic retention times (four to six days) were used to represent a conservative operating condition with respect to pathogen inactivation. Treatment of a fermented primary sludge led to an average volatile-solids (VS) destruction efficiency of 45%, while VS destruction for the other two sources was near or below 38%, the Class A criterion for vector attraction reduction. Consistent with other studies on thermophilic anaerobic digestion of sludges at short residence times, effluent concentrations of volatile fatty acids (VFAs) were relatively high. Also consistent with other studies, the most abundant VFA in the effluent was propionate. Gas production ranged from 0.3 to 0.5 m3/kg VS fed and from 0.8 to 1.3 m3/kg VS destroyed.     

Demonstrating a correlation between infrastructure and national development

This paper demonstrates a correlation between the extensiveness of infrastructure and national development. This was achieved by considering kilometres of paved roads, kilometres of rail, kilometres of paved runways, quality of shipping ports and quality of urban infrastructure. Data were collected from a variety of sources including the World Bank and the United Nations databases. Measures of the quantity or extensiveness of the infrastructures were normalized based on the populations of the various countries, transforming them into per capita measures, which were then logarithmically transformed to produce indices of the extensiveness of the infrastructures. These indices were then plotted against the national development indicator, the human development index (HDI). Of the infrastructures considered, paved roads per capita index showed the strongest correlation with HDI, while quality of port infrastructure index showed the weakest correlation. When the indices for the different infrastructures were combined into a single index the correlation with HDI appeared to be strongest, highlighting the synergistic effect of different infrastructures when working in tandem. Based on this, the findings of this study support the position of holistically managing a country's infrastructure assets.