Modeling interactions between saturated and un-saturated zones by Hydrus-1D in semi-arid regions (plain of Kairouan,Central Tunisia)

In semi-arid areas like the Kairouan region, salinization has become an increasing concern because of the constant irrigation with saline water and over use of groundwater resources, soils, and aquifers. In this study, a methodology has been developed to evaluate groundwater contamination risk based on the unsaturated zone hydraulic properties. Two soil profiles with different ranges of salinity, one located in the north of the plain and another one in the south of plain (each 30 m deep) and both characterized by direct recharge of the aquifer, were chosen. Simulations were conducted with Hydrus-1D code using measured precipitation data for the period 1998–2003 and calculated evapotranspiration for both chosen profiles. Four combinations of initial conditions of water content and salt concentration were used for the simulation process in order to find the best match between simulated and measured values. The success of the calibration of Hydrus-1D allowed the investigation of some scenarios in order to assess the contamination risk under different natural conditions. The aquifer risk contamination is related to the natural conditions where it increased while facing climate change and temperature increase and decreased in the presence of a clay layer. Hydrus-1D was a useful tool to predict the groundwater level and quality in the case of a direct recharge and in the absence of any information related to the soil layers except for the texture.     

Simulation of the evolution of particle size distributions in a vehicle exhaust plume with unconfined dilution by ambient air

Over the past several years, numerous studies have linked ambient concentrations of particulate matter (PM) to adverse health effects, and more recent studies have identified PM size and surface area as important factors in determining the health effects of PM. This study contributes to a better understanding of the evolution of particle size distributions in exhaust plumes with unconfined dilution by ambient air. It combines computational fluid dynamics (CFD) with an aerosol dynamics model to examine the effects of different streamlines in an exhaust plume, ambient particle size distributions, and vehicle and wind speed on the particle size distribution in an exhaust plume. CFD was used to calculate the flow field and gas mixing for unconfined dilution of a vehicle exhaust plume, and the calculated dilution ratios were then used as input to the aerosol dynamics simulation. The results of the study show that vehicle speed affected the particle size distribution of an exhaust plume because increasing vehicle speed caused more rapid dilution and inhibited coagulation. Ambient particle size distributions had an effect on the smaller sized particles (approximately 10 nm range under some conditions) and larger sized particles (>2 microm) of the particle size distribution. The ambient air particle size distribution affects the larger sizes of the exhaust plume because vehicle exhaust typically contains few particles larger than 2 microm. Finally, the location of a streamline in the exhaust plume had little effect on the particle size distribution; the particle size distribution along any streamline at a distance x differed by less than 5% from the particle size distributions along any other streamline at distance x.     

Soil pollution assessment and identification of hyperaccumulating plants in chromated copper arsenate (CCA) contaminated sites, Korea

In recent decades, heavy metal contamination in soil adjacent to chromated copper arsenate (CCA) treated wood has received increasing attention. This study was conducted to determine the pollution level (PL) based on the concentrations of Cr, Cu and As in soils and to evaluate the remediative capacity of native plant species grown in the CCA contaminated site, Gangwon Province, Korea. The pollution index (PI), integrated pollution index (IPI), bioaccumulation factors (BAF_shoots and BAF_roots) and translocation factor (TF) were determined to ensure soil contamination and phytoremediation availability. The 19 soil samples from 10 locations possibly contaminated with Cr, Cu and As were collected. The concentrations of Cr, Cu and As in the soil samples ranged from 50.56-94.13 mg kg⁻¹, 27.78-120.83 mg kg⁻¹, and 0.13-9.43 mg kg⁻¹, respectively. Generally, the metal concentrations decreased as the distance between the CCA-treated wood structure and sampling point increased. For investigating phytoremediative capacity, the 19 native plant species were also collected in the same area with soil samples. Our results showed that only one plant species of Iris ensata, which presented the highest accumulations of Cr (1120 mg kg⁻¹) in its shoot, was identified as a hyperaccumulator. Moreover, the relatively higher values of BAF_shoot (3.23-22.10) were observed for Typha orientalis, Iris ensata and Scirpus radicans Schk, suggesting that these plant species might be applicable for selective metal extraction from the soils. For phytostabilization, the 15 plant species with BAF_root values > 1 and TF values < 1 were suitable; however, Typha orientalis was the best for Cr.     

Inactivation of pathogenic micro-organisms in hospital waste using a microwave

The aim of this study was to investigate the efficiency of dry sterilization by microwave in the inactivation of pathogenic bacteria in blood wastes. Eight bacteria strains were selected for this purpose and these are S. aureus, Salmonella sp., E. faecalis, K. pneumonia, P. aeruginosa, E. coli, Streptococcus Group B and Bacillus sp. Sterilization by microwave was carried out at 385, 450 and 700 watts for 1, 5 and 10 min, respectively. Isolation and enumeration of pathogenic bacteria before and after treatments were carried out using direct plate technique and inactivation was determined in terms of log reduction. Increasing the running time and power to 10 min and 700 watts did not increase log reduction of most of pathogenic bacteria especially of gram negative bacteria. Revival of pathogenic bacteria during the storage period might be aided by the presence of a low moisture content which helps bacterial cells to revive but not to reproduce or over-grow. It can be concluded that dry sterilization of blood wastes by microwave reduces the number and limited re-growth of these pathogenic bacteria during storage time, due to the lower moisture content in the blood wastes.     

EVALUATION OF CURVE NUMBER PROCEDURES TO PREDICT RUNOFF IN GLEAMS1

ABSTRACT: Proper selection of curve number values will improve the capability of the SCS-Curve Number procedure in predicting runoff. Both CREAMS and GLEAMS models use the Smith and Williams (1980) approach of converting CNII (curve number value for average antecedent moisture conditions) into CNI (curve number value for dry antecedent moisture conditions) in calculating the soil retention parameter (S). CREAMS and GLEAMS have been found to under predict runoff because of the internal conversion of CNII to CNI. This study shows modifications of the GLEAMS model using CMI without converting it to CM and it also shows the seasonal curve number approaches with and without converting CNII to CNI. Results indicate that using CNII without internal conversion to CNI provides better runoff and erosion predictions than the original version of GLEAMS and versions with seasonal curve numbers when tested with four years of field data in the Coastal Plain physiographic region of Maryland.     

Preparation and characterization of mesoporous γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> recovered from aluminum cans waste and its use in the dehydration of methanol to dimethyl ether

The present study includes synthesis of two γ-Al₂O₃ samples from waste aluminum cans using a simple precipitation method. Precipitation was carried out using two different precipitating agents (i.e. NaOH and NH₄OH). The two prepared alumina samples were characterized by means of X-ray diffraction (XRD) and N₂ adsorption–desorption techniques. Surface acidity of γ-Al₂O₃ samples was measured by adsorption of two different probe molecules (i.e. pyridine and dimethyl pyridine) followed by desorption measurements using thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Catalytic activity of the two prepared alumina samples towards the dehydration of methanol (to dimethyl ether) was studied in a fixed bed reactor at 300 °C. For comparison reasons, commercial γ-Al₂O₃ sample was, also, tested for the same catalytic reaction under the same conditions. Results showed that the alumina sample prepared using NaOH as a precipitating agent exhibited a better catalytic activity and stability compared with that prepared using NH₄OH and showed a similar activity as the commercial γ-Al₂O₃ sample.     

Real-time measurements of jet aircraft engine exhaust

Particulate-phase exhaust properties from two different types of ground-based jet aircraft engines--high-thrust and turboshaft--were studied with real-time instruments on a portable pallet and additional time-integrated sampling devices. The real-time instruments successfully characterized rapidly changing particulate mass, light absorption, and polycyclic aromatic hydrocarbon (PAH) content. The integrated measurements included particulate-size distributions, PAH, and carbon concentrations for an entire test run (i.e., "run-integrated" measurements). In all cases, the particle-size distributions showed single modes peaking at 20-40nm diameter. Measurements of exhaust from high-thrust F404 engines showed relatively low-light absorption compared with exhaust from a turboshaft engine. Particulate-phase PAH measurements generally varied in phase with both net particulate mass and with light-absorbing particulate concentrations. Unexplained response behavior sometimes occurred with the real-time PAH analyzer, although on average the real-time and integrated PAH methods agreed within the same order of magnitude found in earlier investigations.     

Natural radioactivity in the scale of water well pipes

The natural radioactivity of 226Ra and 228Ra in scale samples taken from pipes used in several local water wells was investigated. The results showed 226Ra activities to be varying from 1284 to 3613 Bq/kg whereas, the 228Ra concentrations did not show any significant variation, all being low, below 30 Bq/kg. The 222Rn exhalations from these scale samples were also measured and compared with the 226Ra contents. The average ratio of 222Rn/226Ra was 31%. Chemical analyses showed that the main constituent of the scale samples was iron. The radiation dose rates from the pipes and scale were up to 100nSv/h. Although not a major hazard this could present a long-term risk if the scale materials were handled indiscriminately.     

Response curves of seventeen woody species to soil factors along a riparian forest in northern Iran

The aim of this study was to determine type of response curves for seventeen woody species (10 tree and 7 shrub species) to soil factors in an intact riparian forest in Safaroud River in northern Iran using HOF function. Data were collected along transects established perpendicular to the water flow on both sides of the river. Results indicated different responses for different woody species. The most common were symmetricunimodal response curves and curves showing an increase in occurrence probability after a certain value in form of a plateau. Bimodal curves were four times more frequent in riverside than forest interior area. It seems that river flow disturbances through frequent floods effect on species tolerance and optimum in riversides.     

Efficacy and safety of doravirine in treatment-naive HIV-1-infected adults: a systematic review and meta-analysis

Environmental Science and Pollution Research - This research aims to study the safety and efficacy of doravirine in the treatment of HIV-1 (human immunodeficiency virus) patients. We conducted an...