Can renewable energy technologies improve the management of stressed water resources threatened by climate change? Argentine drylands case study

This work addresses increasing concerns about water management for rural productive activities in the vast dry regions of Latin America by assessing renewable energy technologies (RETs) that could be suitable for localized needs. Forecasted trends in climate change and variability make this analysis very relevant, in an area where very little published work exists. While Argentina is widely known for its fertile pampas, around 75 % of the country consists of dry lands. In addition, erosion is increasing by up to 650,000 hectares each year. The coordinated adoption of a set of actions, including land use planning and strengthening productive activities that guarantee access to water and improve water and soil management is needed. Renewable energies could help towards achieving these aims, if water is made available at affordable costs and with suitable technologies. This paper evaluates experiences with three RETs—photovoltaic pumping from deep wells, small wind turbine pumping, and high-power wind turbines, and discusses a potential role for use in rural Argentina. Although cheaper and more reliable renewable alternatives to energy sources such as diesel could be used for pumping from groundwater resources in isolated locations, limitations arise when pumping head and/or water volume requirements are large or highly seasonal. The cost increases and technical challenges of accessing this deeper water, as indicated by case studies, emphasize the importance of planning and support schemes development.     

Metal bioaccumulation in the greater white-toothed shrew, Crocidura russula, inhabiting an abandoned pyrite mine site

Hepatic and renal concentrations of iron, magnesium, zinc, lead, copper, manganese, mercury, cadmium, molybdenum, chromium, and nickel were quantified in shrews (Crocidura russula) inhabiting a pyrite mine site in Portugal. Several morphological parameters (body weight, residual index, and relative weights) were also examined to clarify the physiological effects of pollution. Shrews from the mine showed increased bioavailability of Fe, Pb, Hg, Cd, Mo, and Ni in comparison with reference specimens. Adult shrews had the highest Cd levels while Cr and Ni concentrations diminished. Intersexual differences were found for Mo and Ni. As a consequence of metal pollution, the relative hepatic weight was higher in shrews from the mine site when compared with reference specimens. These data indicate that C. russula is a good bioindicator of metal pollution. We also evaluated the toxic effects of Pb, Hg, Cd, and Ni, because several shrews from the polluted site showed high concentrations of these metals. To approximate at the real biological impact of abandoned mines, after this first step it is necessary to associate the bioaccumulation levels and morphological effects with other physiological, ecological and genetical biomarkers.     

Statistical analysis as a tool for discriminating dioxin formation pathways

Typical thermal fingerprints are rather evenly composed of all available polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) congeners, a feature also linked with CuCl₂-catalysis. Conversely, chlorophenol condensation patterns are supported strongly by CrCl₃-, ZnCl₂- and CdCl₂-catalysis; they feature selective formation of, e.g., 1,3,6,8- and 1,3,7,9-TCDD arising from mainly 2,4,6-trichlorophenol, a chlorophenol well-represented in incinerator flue gas. Just few, well-defined PCDD-congeners steadily emerge from chlorophenols. Surprisingly, it is experimentally established that these are not generally formed by parallel processes. Additionally, the formation of four important 2,3,7,8-substituted TCDD/F- and PeCDD/F-congeners is statistically quasi-unrelated. Apparently, external (α) or lateral (β)-chlorination occurs as a chance event, contrary to observations and hypotheses in earlier studies. These statements are corroborated by selected congener-to-congener representations. For performing this statistical analysis, simple techniques are followed. Cross-correlation matrices show a relationship for each pair of PCDD/F-congeners in a particular data set: PCDD/F-congener pairs statistically correlate, anti-correlate, or appear rather neutral. In this paper, these novel concepts were applied on data, established during tests on Model Fly Ash (MFA); principal component analysis was used to demonstrate the relevance of MFA-data in relation to municipal solid waste incineration signatures.     

Polychlorinated biphenyls (PCBs) in Africa: a review of environmental levels

Several studies have shown an increase in PCB sources in Africa due to leakage and wrongly disposed transformers, continuing import of e-waste from countries of the North, shipwreck, and biomass burning. Techniques used in the recycling of waste such as melting and open burning to recover precious metals make PCBs contained in waste and other semivolatile organic substances prone to volatilization, which has resulted in an increase of PCB levels in air, blood, breast milk, and fish in several regions of Africa. Consequences for workers performing these activities without adequate measures of protection could result in adverse human health effects. Recent biodegradation studies in Africa have revealed the existence of exotic bacterial strains exhibiting unique and unusual PCB metabolic capability in terms of array of congeners that can serve as carbon source and diversity of congeners attacked, marking considerable progress in the development of effective bioremediation strategies for PCB-contaminated matrices such as sediments and soils in tropical regions. Action must be taken to find and deal with the major African sources of these pollutants. The precise sources of the PCB plume should be pinned down and used to complete the pollutant inventories of African countries. These nations must then be helped to safely dispose of the potentially dangerous chemicals.     

Hydrolytic biodegradation of chlorothalonil in the soil and in cabbage crops

Broccoli and Chinese cabbage crops were treated at planting by pouring an emulsion of the fungicide chlorothalonil around the stem of the plant. During culture, chlorothalonil was biodegraded in soil into l,3‐dicarbamoyl‐2,4,5,6‐tetrachlorobenzene (compound 1), l,3‐dicyano‐4‐hydroxy‐2,5,6‐trichlorobenzene (compound 2), and l‐carbamoyl‐3‐cyano‐4‐hydroxy‐2,5,6‐trichlorobenzene (compound 3). Compounds 1 and 2 were the major metabolites in soil. In the harvested broccoli (in the flower) and Chinese cabbages (the leaves), the concentrations of chlorothalonil and of compounds 1 and 2 were lower respectively than 0.1, 0.1 and 0.5mg/kg fresh weight.     

Patterns of PCDDs and PCDFs in human milk and food and their characterization by artificial neural networks

Artificial neural network (ANN) has been recently introduced as a tool for data analysis. In this study, Kohonen's self-organizing maps (SOMs), a special type of neural network, were applied to a set of PCDD/PCDF concentrations found in 54 human milk and 83 food samples, which were collected in a number of countries all over the world. Data were obtained from the scientific literature. The purpose of the study was to find a potential relationship between PCDD/PCDF congener profiles in human milk and the dietary habits of the different countries in which samples were collected. The comparison of the SOM component planes for human milk and foodstuffs indicates that those countries with a greater fish consumption show also higher PCDD/PCDF concentrations in human milk. SOMs enable both the visualization of sample units and the visualization of congener distribution.     

The oxycoal process with cryogenic oxygen supply

Due to its large reserves, coal is expected to continue to play an important role in the future. However, specific and absolute CO₂ emissions are among the highest when burning coal for power generation. Therefore, the capture of CO₂ from power plants may contribute significantly in reducing global CO₂ emissions. This review deals with the oxyfuel process, where pure oxygen is used for burning coal, resulting in a flue gas with high CO₂ concentrations. After further conditioning, the highly concentrated CO₂ is compressed and transported in the liquid state to, for example, geological storages. The enormous oxygen demand is generated in an air-separation unit by a cryogenic process, which is the only available state-of-the-art technology. The generation of oxygen and the purification and liquefaction of the CO₂-enriched flue gas consumes significant auxiliary power. Therefore, the overall net efficiency is expected to be lowered by 8 to 12 percentage points, corresponding to a 21 to 36% increase in fuel consumption. Oxygen combustion is associated with higher temperatures compared with conventional air combustion. Both the fuel properties as well as limitations of steam and metal temperatures of the various heat exchanger sections of the steam generator require a moderation of the temperatures during combustion and in the subsequent heat-transfer sections. This is done by means of flue gas recirculation. The interdependencies among fuel properties, the amount and the temperature of the recycled flue gas, and the resulting oxygen concentration in the combustion atmosphere are investigated. Expected effects of the modified flue gas composition in comparison with the air-fired case are studied theoretically and experimentally. The different atmosphere resulting from oxygen-fired combustion gives rise to various questions related to firing, in particular, with regard to the combustion mechanism, pollutant reduction, the risk of corrosion, and the properties of the fly ash or the deposits that form. In particular, detailed nitrogen and sulphur chemistry was investigated by combustion tests in a laboratory-scale facility. Oxidant staging, in order to reduce NO formation, turned out to work with similar effectiveness as for conventional air combustion. With regard to sulphur, a considerable increase in the SO₂ concentration was found, as expected. However, the H₂S concentration in the combustion atmosphere increased as well. Further results were achieved with a pilot-scale test facility, where acid dew points were measured and deposition probes were exposed to the combustion environment. Besides CO₂ and water vapour, the flue gas contains impurities like sulphur species, nitrogen oxides, argon, nitrogen, and oxygen. The CO₂ liquefaction is strongly affected by these impurities in terms of the auxiliary power requirement and the CO₂ capture rate. Furthermore, the impurity of the liquefied CO₂ is affected as well. Since the requirements on the liquid CO₂ with regard to geological storage or enhanced oil recovery are currently undefined, the effects of possible flue gas treatment and the design of the liquefaction plant are studied over a wide range.     

PCDD/F formation during thermal desorption of chlorobenzene contaminated soil

Environmental Science and Pollution Research - Unintentional formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) is observed and investigated during the thermal desorption in...