Development of Anticorrosive Poly(Ether-Urethane) Amide Coatings from Linseed Oil: A Sustainable Resource

Polyetheramide(PEtA) resin was synthesized by the condensation polymerization of N,N-bis(2-hydroxy ethyl) linseed oil fatty amide diol (HELA) with resorcinol. It was further treated with different percentage of toluylene 2-4-diisocyanate (TDI) to obtain the urethane modified polyetheramide resins (UPEtA). The structural elucidation of PEtA and urethane modified polyetheramide(UPEtA) were carried out by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. These analyses confirm the formation of PEtA and UPEtA. Physico-chemical and physico-mechanical analysis were performed by standard laboratory methods. The resin composition UPEtA-24 showed best physico-mechanical properties with scratch hardness 2.0 kg, impact resistance 150 lb/in. and good bending ability. The thermal stability and curing behavior of polymers were respectively studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Thermal analysis shows that these coatings can be used safely upto 190 °C. The coatings of UPEtA resins were prepared on mild steel strips. The anticorrosive behavior of UPEtA coatings were investigated in acid, alkali, water and xylene. All the coatings exhibit good chemical resistance performance in acid, alkali, saline and organic solvents, while the resin UPEtA-24 shows the best performance.     

In vitro development of resistance to arsenite and chromium-VI in Lactobacilli strains as perspective attenuation of gastrointestinal disorder

Inadvertent intake of inorganic arsenic and chromium through drinking water and food causing their toxic insults is a major health problem. Intestinal bacteria including Lactobacilli play important regulatory roles on intestinal homeostasis, and their loss is known to cause gastrointestinal (GI) disorders. Probiotic Lactobacilli resistance to arsenite and chromium-VI could be an importantfactorfor the perspective attenuation of Gl-disorders caused by these toxic metals/metalloid. In the present study resistance of arsenite (up to 32 ppm), Cr-VI (up to 64 ppm), and arsenite plus Cr-VI (32 ppm each) were developed under in vitro condition following chronological chronic exposures in Lactobacilli strains. Comparative study of biochemical parameters such as membrane transport enzymes and structural constituents; dehydrogenase and esterase activity tests, which are respective indicators for respiratory and energy producing processes, and the general heterotrophic activity of cells, of resistant strains showed similarities with their respective normal parent strains. The resistant strains were also found to be sensitive to antibiotics. Findings indicate that these resistant probiotic Lactobacilli would be useful in the prophylactic interventions of arsenic and chromium GI-toxicity.     

An updated review on advancement in fermentative production strategies for biobutanol using Clostridium spp.

A significant concern of our fuel-dependent era is the unceasing exhaustion of petroleum fuel supplies. In parallel to this, environmental issues such as the greenhouse effect, change in global climate, and increasing global temperature must be addressed on a priority basis. Biobutanol, which has fuel characteristics comparable to gasoline, has attracted global attention as a viable green fuel alternative among the many biofuel alternatives. Renewable biomass could be used for the sustainable production of biobutanol by the acetone-butanol-ethanol (ABE) pathway. Non-extinguishable resources, such as algal and lignocellulosic biomass, and starch are some of the most commonly used feedstock for fermentative production of biobutanol, and each has its particular set of advantages. Clostridium, a gram-positive endospore-forming bacterium that can produce a range of compounds, along with n-butanol is traditionally known for its biobutanol production capabilities. Clostridium fermentation produces biobased n-butanol through ABE fermentation. However, low butanol titer, a lack of suitable feedstock, and product inhibition are the primary difficulties in biobutanol synthesis. Critical issues that are essential for sustainable production of biobutanol include (i) developing high butanol titer producing strains utilizing genetic and metabolic engineering approaches, (ii) renewable biomass that could be used for biobutanol production at a larger scale, and (iii) addressing the limits of traditional batch fermentation by integrated bioprocessing technologies with effective product recovery procedures that have increased the efficiency of biobutanol synthesis. Our paper reviews the current progress in all three aspects of butanol production and presents recent data on current practices in fermentative biobutanol production technology.

     

Nanodiagnostics for plant pathogens

Rapid detection technologies with high sensitivity and selectivity for plant pathogens are essential to prevent disease spread and minimize losses to assure optimal productivity and food security. Traditional laboratory techniques such as microscopy and culture are time-consuming, labour intensive and require complex sample handling. Immunological and molecular techniques have advanced but have some issues related to rapidity, signal strength and instrumentation. The integration of immunological and molecular diagnostics with nanotechnology systems offers an option where all detection steps can be accommodated on a portable miniaturized device for rapid and accurate detection of plant pathogens. The sensitive nature of functionalized nanoparticles can be used to design phytopathogen detection devices with smart sensing capabilities for field use. This review summarizes the current status and future prospects of nanotechnology for detection and diagnosis of plant pathogens.     

A cost-effective microbial slurry technology for rapid composting of municipal solid wastes in waste dump sites in India and its feasibility for use in Australia

This short article reports on commercial composting slurry now available in India. The slurry culture containing active decomposer bacteria and enzymes is spread on the surface of the garbage and inside the heaps in windrows constructed at waste dump sites. The microbes produce hydrolysing enzymes to break down the long chain complexes of the organic substrates. About 1 kg of slurry culture in the colloidal emulsion form mixed with 20 litres of water is sprayed on about 3 m of solid waste. For one tonne of waste 200 litres of slurry water are needed. The waste heaps are turned once in 7 to 10 days for proper aeration and the inoculant slurry is sprayed at each turning to enhance decomposition and to maintain the proper moisture level which is usually 45–55 percent. The process is exothermic and the windrows reach a temperature of 70°–75°C within 24–36 hours, killing many harmful pathogens and repelling all birds, stray animals, flies and mosquitos from the dump site. The entire process is completed within 4–6 weeks and as the decomposition is completed the temperature falls to normal. About 40–45 percent of the undecomposed matter is of recyclable materials, and of the rest about 25–30 percent requires safe disposal in adjacent land-fill sites. The problem of emission from tip gases and of leachate and discharge of effluents is greatly reduced. The foul odor of the tip also disappears within 2–3 days of sanitization. The compost produced is rich in sodium, potassium and phosphorous as well as certain trace elements, and contains active nitrogen fixing and phosphate solubulising bacteria.     

An overview of an indoor radon study carried out in dwellings in India and Bangladesh during the last decade using solid state nuclear track detectors

This paper reports on radon concentrations in dwellings from fifty different locations of India. The incorporated data were obtained using the passive solid state nuclear track detector technique. The estimated geometric mean value for India is 67.1 Bq m(-3). Chuadanga in Bangladesh had the lowest observed indoor radon concentration of 27.3 Bq m(-3) and Una in the northern part of India had the highest concentration of 281.5 Bq m(-3). This paper discusses the national geometrical mean value in terms of the national geometric mean values of other countries and also in terms of the geological influence. The estimated indoor radon levels are compared with the indoor radon levels as recommended by the International Commission on Radiation Protection (ICRP). It was observed that there are several locations in India where dwellings have higher indoor radon levels than the ICRP recommended value and requires some sort of intervention from regulating authorities. The mean value for indoor radon level given in the report of UNSCEAR 2000 for India needs to be revised.     

Scanning electron microscopic studies and growth response of the plants of Helianthus annuus L. grown on tannery sludge amended soil

The plants of Helianthus annuus L. var. modern were grown in the soil amended with different amounts of tannery sludge (10%, 25%, 35%, 50%, 75% and 100%), collected from Wastewater Treatment Plant Jajmau, Kanpur (Uttar Pradesh, India) under field conditions. The effect of tannery sludge amendments was studied on the growth performance of the plant, i.e. root length, shoot length, leaf area and number of leaves after 30, 60 and 90 days of exposures. The root length of the plant increased up to 35% tannery sludge followed by significant (p<0.01) decrease at higher amendments, whereas the shoot length of the plant increased with increase in sludge amendment ratio at all the exposure periods, compared to their respective controls. The number of leaves and leaf area in the plants of H. annuus increased at all the amendments of tannery sludge at initial exposure periods (30 and 60 days); however, it decreased at higher sludge amendments at highest exposure period (90 days) as compared to their respective controls. The analysis of scanning electron micrographs of the leaf surface of H. annuus grown on 50% and 100% tannery sludge after 90 days showed an increase in the frequency of stomata and trichomes, closure of stomata and degeneration of certain cells in the sludge grown plants.     

Occurrence and fate of pharmaceuticals and personal care products (PPCPs) in biosolids

Each year, large quantities of pharmaceuticals and personal care products (PPCPs) are used worldwide. Once conveyed to wastewater treatment plants, PPCPs can remain unchanged or undergo partial or complete transformation during wastewater treatment processes before discharge into the environment via effluent and biosolids for land application. Biosolids can be a major sink for some PPCPs. Previous investigations have indicated that land application of biosolids may be a potential important route through which PPCPs enter the environment. However, no information is available on exactly how closely the concentrations of PPCPs in the environmental media are related to the land application of PPCP-containing biosolids. This paper reviews currently available information on the occurrence of PPCPs in biosolids, methods of analysis, the potential fate of PPCPs in biosolids-applied soils, and composting as a potential means for removal of PPCPs from biosolids.     

应用卫星图像评价尼泊尔的创造性森林经营策略

现迫切需要确定那些对森林覆盖率变化有显著影响的森林经营制度.这个研究提出了初步的"概念依据"方法论,它把毁林理论与卫星图像变化分析结合起来鉴定理论上也许不存在的林区.通过对尼泊尔Chitwan地区陆地卫星TM图像时间分析,结合道路地理信息系统以及对地形的目视估计,鉴定出10个这样的森林异相.再通过快速野外调查,确定哪一个异相出现有用的创新性森林经营.根据这个信息,选择了一个实地作详细的野外调查.通过这一项分析,我们发现这是一个重要的社区林和生态旅游的项目.此前我们并不知其存在.文章对这种方法在监测森林覆盖变化的应用的价值和局限进行了描述.     

Net primary productivity of some aquatic macrophytes in sewage-sullage mixture

Sewage-sullage mixture from Raipur city is spread over a vast area surrounding the city. This mixture has a pH always above neutrality with high turbidity. Transparency was nil with the absence of phenolphthalein alkalinity and dissolved oxygen. Hardness was high with low nitrogen and phosphorus concentration. Human consumable. acquatic macrophytes are cultivated in such waste water. Net primary productivity of three macrophytes: Ipomoea aquatica, Marsilea quadrifolia and Nelumbo nucifera were evaluated while being cultivated in such sewage-sullage mixture. Productivity was determined either with periodic biomass removal (I. aquatica and M. quadrifolia) or through removing the biomass only once at the time of growing season (N. nucifera). Growing season productivity of up to 27.48. 19.81 and 9.49 g m(-2) and day(-1) and extrapolated productivity of up to 100.30, 72.31 and 34.64 mt. ha(-1) yr(-1) was recorded for I. aquatica. M. quadrifolia and N. nucifera respectively. Thus, these macrophytes are yielding a high amount of human consumable biomass from an area which neither be a useless wetland.