Oceanographic preferences of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tagging and remotely sensed oceanographic data were used to determine the oceanographic habitat use and preferences of Atlantic bluefin tuna (Thunnus thynnus L.) exhibiting behaviors associated with breeding in the Gulf of Mexico (GOM). Oceanographic habitats used by 28 Atlantic bluefin tuna exhibiting breeding behavior (259 days) were compared with available habitats in the GOM, using Monte Carlo tests and discrete choice models. Habitat utilization and preference patterns for ten environmental parameters were quantified: bathymetry, bathymetric gradient, SST, SST gradient, surface chlorophyll concentration, surface chlorophyll gradient, sea surface height anomaly, eddy kinetic energy, surface wind speed, and surface current speed. Atlantic bluefin tuna exhibited breeding behavior in the western GOM and the frontal zone of the Loop Current. Breeding areas used by the bluefin tuna were significantly associated with bathymetry, SST, eddy kinetic energy, surface chlorophyll concentration, and surface wind speed, with SST being the most important parameter. The bluefin tuna exhibited significant preference for areas with continental slope waters (2,800–3,400 m), moderate SSTs (24–25 and 26–27°C), moderate eddy kinetic energy (251–355 cm² s⁻²), low surface chlorophyll concentrations (0.10–0.16 mg m⁻³), and moderate wind speeds (6–7 and 9–9.5 m s⁻¹). A resource selection function of the bluefin tuna in the GOM was estimated using a discrete choice model and was found to be highly sensitive to SST. These habitat utilization and preference patterns exhibited by breeding bluefin tuna can be used to develop habitat models and estimate the probable breeding areas of bluefin tuna in a dynamic environment.     

Removal of alkylphenols from polluted sites using surfactant-assisted soil washing and photocatalysis

Background and purpose  

Surfactant-assisted soil washing and photocatalysis are well-known remediation processes of environmental concern. The application of photocatalysis to treat soil washing extracts containing 4-methylphenol, 4-ethylphenol and 4–tert-butylphenol in the presence of nonionic (C₁₂E₈ and C₁₂E₂₃) and anionic (SDS) surfactants and some of their binary mixtures was investigated in this work by studying the pollutants degradation in the presence of TiO₂ dispersions irradiated with simulated solar light.     

Molecular genetic differentiation in earthworms inhabiting a heterogeneous Pb-polluted landscape

A Pb-mine site situated on acidic soil, but comprising of Ca-enriched islands around derelict buildings was used to study the spatial pattern of genetic diversity in Lumbricus rubellus. Two distinct genetic lineages (‘A’ and ‘B’), differentiated at both the mitochondrial (mtDNA COII) and nuclear level (AFLPs) were revealed with a mean inter-lineage mtDNA sequence divergence of approximately 13%, indicative of a cryptic species complex. AFLP analysis indicates that lineage A individuals within one central ‘ecological island’ site are uniquely clustered, with little genetic overlap with lineage A individuals at the two peripheral sites. FTIR microspectroscopy of Pb-sequestering chloragocytes revealed different phosphate profiles in residents of adjacent acidic and calcareous islands. Bioinformatics found over-representation of Ca pathway genes in EST_Pb libraries. Subsequent sequencing of a Ca-transport gene, SERCA, revealed mutations in the protein's cytosolic domain. We recommend the mandatory genotyping of all individuals prior to field-based ecotoxicological assays, particularly those using discriminating genomic technologies.     

Modeling leaf dispersal in mixed hardwood forests using a ballistic approach

In mixed-species stands, modeling leaf litter dispersal is important to predict the physical and chemical characteristics of the forest floor, which plays a major role in nutrient cycling and in plant population dynamics. In this study, a spatially explicit model of leaf litterfall was developed and compared with two other models. These three models were calibrated for a mixed forest of oak and beech using litterfall data from mapped forest plots. All models assumed that an allometric equation described individual leaf litter production, but they strongly differed in the modeling of the probability density of leaf shedding with distance from source trees. Two models used a negative exponential function to account for leaf dispersal with distance, and this function was allowed to vary according to wind direction in one of them. In contrast, our approach was based on a simple ballistic equation considering release height, wind speed, wind direction, and leaf fall velocity; the distributions of wind speeds and wind directions were modeled according to a Weibull and a Von Mises distribution, respectively. Using an independent validation data set, all three models provided predictions well correlated to measurements (r > 0.83); however, the two models with a direction-dependent component were slightly more accurate. In addition, parameter estimates of the ballistic model were in close agreement with a foliar litter production equation derived from the literature for beech and with wind characteristics measured during leaf litterfall for both species. Because of its mechanistic background, such a spatially explicit model might be incorporated as a litterfall module in larger models (nutrient cycling, plant population dynamics) or used to determine the manner in which patch size in mixed-species stands influences litter mixture.     

Development of a sandwich enzyme-linked immunosorbant assay for the quantification of vitellogeinin in Bullfrog (Rana catesbeiana)

A sandwich enzyme-linked immunosorbant assay (ELISA) was developed to quantitatively detect Bullfrog (Rana catesbeiana) vitellogenin (VTG) levels. This procedure involved a sandwich ELISA using monoclonal antibodies of BVmA1 and BVmA2 against Bullfrog-VTG, and BVmA1 conjugated to horseradish peroxidase as the detection antibody. The assay range was between 9.4 ng/ml and 1200 ng/ml and the recovery of the VTG added to Bullfrog control male serum was 92.0-108.8%. Male Bullfrog was induced by injection 17beta-estradiol (E2) for four weeks and Bullfrog-VTG levels were measured each week. Histological analysis was performed for investigating the correlation of the effect to male reproduction and Bullfrog-VTG level variation depending on E2 dose. After two weeks of E2 exposure, the induced Bullfrog-VTG level was significantly higher than Bullfrog control female (p<0.05). After four weeks of E2 exposure, the rupture and fusion of seminiferous tubule in the testes of male Bullfrog were shown and provided direct evidence that the reproduction of male Bullfrog was affected by estrogenic compounds. Bullfrog-VTG bioassay, using the sandwich ELISA, could be a sensitive and useful tool for quantification of estrogenic principles in aquatic environments.     

Comparison of continuous and filter-based carbon measurements at the Fresno supersite

Results from six continuous and semicontinuous black carbon (BC) and elemental carbon (EC) measurement methods are compared for ambient samples collected from December 2003 through November 2004 at the Fresno Supersite in California. Instruments included a multi-angle absorption photometer (MAAP; lambda = 670 nm); a dual-wavelength (lambda = 370 and 880 nm) aethalometer; seven-color (lambda = 370, 470, 520, 590, 660, 880, and 950 nm) aethalometers; the Sunset Laboratory carbon aerosol analysis field instrument; a photoacoustic light absorption analyzer (lambda = 1047 nm); and the R&P 5400 ambient carbon particulate monitor. All of these acquired BC or EC measurements over periods of 1 min to 1 hr. Twenty-four-hour integrated filter samples were also acquired and analyzed by the Interagency Monitoring of Protected Visual Environments (IMPROVE) thermal/optical reflectance carbon analysis protocol. Site-specific mass absorption efficiencies estimated by comparing light absorption with IMPROVE EC concentrations were 5.5 m2/g for the MAAP, 10 m2/g for the aethalometer at a wavelength of 880 nm, and 2.3 m2/g for the photoacoustic analyzer; these differed from the default efficiencies of 6.5, 16.6, and 5 m2/g, respectively. Scaling absorption by inverse wavelength did not provide equivalent light absorption coefficients among the instruments for the Fresno aerosol measurements. Ratios of light absorption at 370 nm to those at 880 nm from the aethalometer were nearly twice as high in winter as in summer. This is consistent with wintertime contributions from vehicle exhaust and from residential wood combustion, which is believed to absorb more shorter-wavelength light. To reconcile BC and EC measurements obtained by different methods, a better understanding is needed of the wavelength dependence of light-absorption and mass-absorption efficiencies and how they vary with different aerosol composition.     

Photocatalytic degradation of chlorophenols in soil washing wastes containing Brij 35. Correlation between the degradation kinetics and the pollutants–micelle binding

The photocatalytic degradations of 4-chlorophenol (CP), 4-chloro-2-methylphenol (CMP), 4-chloro-3,5-dimethylphenol (CDMP) and 4-chloro-2-isopropyl-5-methylphenol (CIMP) were investigated in water and in simulated soil washing wastes containing Brij 35 (polyoxyethylene(23)dodecyl ether) in the presence of TiO₂ dispersions. A neat inhibition of substrate decomposition proportional to their growing hydrophobicity was observed in the washing wastes for CP, CMP and CDMP, whereas CIMP showed a different behaviour. The mineralization of the organic chlorine of CP and CIMP was relatively fast and complete, whereas it was much slower for CMP and CDMP. Micellar solubilization and substrate adsorption onto the semiconductor play opposite roles on the degradation kinetics, and a breakpoint between the corresponding induced effects was evidenced when the pollutants become completely bound to the micellar aggregates.     

Treatment of mixed contamination in water using cyclodextrin‐based materials

This study investigated the effectiveness of a cyclodextrin‐based solid material for the removal of mixed dissolved contaminants. The solid material was prepared by condensation of α‐cyclodextrin. The removal efficiency was found to be 70 percent for total heavy metals (cadmium, lead, chromium, iron, nickel, cobalt, and mercury) to 98 percent for polychlorinated biphenyls (PCBs). The optimum pH for heavy metal removal was approximately 5 and for PCBs it was in the range of 5–7. All of these heavy metals were successfully recovered from the spent cyclodextrin‐based material using nitric acid, allowing the material to be reused for further passes. The results also showed that the presence of alkaline and alkaline earth metals did not have a significant effect on the removal efficiency, indicating that the cyclodextrin‐based material could selectively remove the heavy metals of concern without being consumed by alkaline and alkaline‐earth metals. © 2006 Government of Canada.