The treatment of wastewater containing pharmaceuticals in microcosm constructed wetlands: the occurrence of integrons (int1–2) and associated resistance genes (sul1–3, qacEΔ1)

Environmental Science and Pollution Research - The aim of this study was to analyze the occurrence of sulfonamide resistance genes (sul1–3) and other genetic elements as antiseptic resistance...     

Analysis of the combustion and pyrolysis of dried sewage sludge by TGA and MS

In this study, the combustion and pyrolysis processes of three sewage sludge were investigated. The sewage sludge came from three wastewater treatment plants.Proximate and ultimate analyses were performed. The thermal behaviour of studied sewage sludge was investigated by thermogravimetric analysis with mass spectrometry (TGA-MS). The samples were heated from ambient temperature to 800 °C at a constant rate 10 °C/min in air (combustion process) and argon flows (pyrolysis process). The thermal profiles presented in form of TG/DTG curves were comparable for studied sludges. All TG/DTG curves were divided into three stages. The main decomposition of sewage sludge during the combustion process took place in the range 180–580 °C with c.a. 70% mass loss. The pyrolysis process occurred in lower temperature but with less mass loss. The evolved gaseous products (H₂, CH₄, CO₂, H₂O) from the decomposition of sewage sludge were identified on-line.     

Study on degradation process of famotidine hydrochloride in aqueous samples

The kinetics of famotidine (FAM) transformation under the influence of various factors, important from the environmental point of view, was investigated in aqueous solutions. The degradation processes using UV, H₂O₂, UV/H₂O₂, H₂O₂/Fe²⁺, and UV/H₂O₂/Fe²⁺ were studied. Direct photolysis and H₂O₂-assisted photolysis showed a pseudo-first-order kinetics, while the Fenton and the photo-Fenton processes fit second-order kinetics. The provided experiments proved a high resistance of FAM to direct photolysis. Its stability depends highly on the pH of the reaction solutions. The rate of FAM direct photolysis in acidic solutions was almost negligible. The reaction rate of FAM photolysis at pH 8–9 was 3.7 × 10^?3 min^?1 with DT₅₀ about 3 h 7 min. It was found that the presence of H₂O₂ in the reaction environment enhances the rate of photolysis of FAM. The observed rates of reaction were 5.1 × 10^?3 min^?1 and 3.7 × 10^?3 min^?1 in acidic and basic solutions, respectively. The used Fenton systems appeared to be the most efficient in FAM removal. The rate of reaction depends on concentration of Fe²⁺ and H₂O₂. It was observed that the presence of UV-light enhances the reaction rate by two to six times in comparison to the classical Fenton system. Additionally, FAM behavior in natural water under solar irradiation was examined. The irradiation experiments were carried out in batch experiments with simulated sunlight.     

Landfill leachates and wastewater of maritime origin as possible sources of endocrine disruptors in municipal wastewater

Environmental Science and Pollution Research - In this study, wastewater from municipal services, such as a port wastewater reception facility (PRF-WW) and a municipal solid waste plant (MSWP), was...     

Prediction of environmental partition coefficients and the Henry's law constants for 135 congeners of chlorodibenzothiophene

Polychlorinated dibenzothiophenes (PCDTs) could be classified as persistent organic pollutants (POPs) in the environment and are particularly interesting due to their structural resemblance to highly toxic dioxins. We show here some basic environmental properties such as n-octanol water (K_OW), n-octanol/air (K_OA) and air/water (K_AW) partition coefficients as well as Henry’s law constants (K_H) for all 135 congeners of chlorodibenzothiophene. Predictions were made by regression of principal components (PCR) and with aid of a set of standard chemicals, for which physical–chemical properties are well featured. Computed K_OW, K_OA, K_AW and K_H values for mono-CDTs ranged, respectively, between 4.66 and 4.71, 7.48 and 7.55, −2.84 and −2.82, 3.56 and 3.74; for di-CDTs between 5.02 and 5.28, 8.03 and 8.29, −3.01 and −2.95, 2.42 and 2.75; for tri-CDTs between 5.53 and 5.70, 8.65 and 8.87, −3.2 and −3.11, 1.58 and 1.92; for tetra-CDTs between 5.95 and 6.13, 9.27 and 9.50, −3.39 and −3.27, 1.02 and 1.33; for penta-CDTs between 6.38 and 6.51, 9.88 and 10.05, −3.54 and −3.45, 0.72 and 0.88; for hexa-CDTs between 6.83 and 6.97, 10.54 and 10.66, −3.72 and −3.64, 0.47 and 0.56; for hepta-CDTs between 7.28 and 7.35, 11.12 and 11.20, −3.81 and −3.87, 0.33 and 0.38; for octa-CDT 7.74, 11.78, −4.04 and 0.23. An estimated value of the three types of partition coefficient and Henry’s law constants suggest that polychlorinated dibenzothiophenes are lipophilic and semi-volatile persistent organic pollutants. Their mobility in the environment seems to be very similar to that of some well-known POPs such as polychlorinated dibenzofurans, -dibenzo-p-dioxins, and -biphenyls or organochlorine pesticides.     

Concentration of heavy metals in hair and skin of silver and red foxes (Vulpes vulpes)

The structure of hair and levels of main chemical elements (C, N, O, S, Cl, Ca, P, Al, Na) in the external layer of hair of silver and red foxes (Vulpes vulpes) in a non-industrialised, typically agricultural region of middle-west Poland was assessed using a scanning microscope. Additionally, analysis of the accumulation of certain heavy metals (Cr, Cu, Ni, Pb and Zn) in hair (washed) and skin (non-tanned) of those foxes was conducted. Heavy metal levels were determined using a spectrophotometric method (ICP-OES), and correlations between these levels in hair and skin were calculated. The microscopic external (morphological) and internal structures (histological) of the hair of farm and wild foxes were not differentiated; however, the hair of farm foxes (external layer) contained higher amounts of C, Na, Al and P. A significantly higher Pb content was noted in non-tanned skin of wild foxes in comparison to farm ones. In the case of farm foxes, a significantly higher Zn content in hair and Zn and Cu in skin was observed in comparison to wild ones. Positive significant correlations between Cr and Ni content (r = 0.622) and Zn and Cu (r = 0.721) in fox skin were noted. A similar relationship between Cr content in hair and Ni in skin (r = 0.643) and between Zn in hair and skin (r = 0.595) was also observed.     

Acidic,neutral and alkaline forest ponds as a landscape element affecting the biodiversity of freshwater snails

In recent years, the number of areas remaining under the influence of acidity has increased. At all levels of ecosystems, biodiversity decreases with acidification, due to the elimination of species that are most sensitive to low pH. Forest ponds belong to a specific group that varied in location, a huge amount of leaf litter, and isolation from other aquatic environments. They are crucial in the industrial landscape with well-developed industry and human activity. The aim was to investigate the relative importance of water chemistry in explaining snail assemblage compositions and species richness in forest ponds of contrasting pH. Patterns in gastropod communities were determined from an analysis in 26 forest ponds with multivariate gradient analysis. Ponds ranged in a base mean pH from 3.0 to 9.0. pH has been found to be an important factor influencing gastropod fauna. Neutral ponds support diverse communities, typical of small water bodies. In two acidic pond types, snail fauna was different. Among the species characteristic for acidic ponds (pH < 6) were Anisus spirorbis and Aplexa hypnorum. The greatest distinct characterised alkaline ponds with the numerous appearance of alien Physa acuta. The most diverse gastropod fauna was found in neutral ponds, whereas the lowest degree of diversity was found in ponds with the lowest pH. Current knowledge of pH-associated changes in aquatic ecosystems is still incomplete because anthropogenic acidification is a recent phenomenon. It is extremely important in forest habitats, since they react more intensively to climatic factors and are often used in landscape management and planning.     

Survey on composition and bioconcentration potential of 12 metallic elements in King Bolete (Boletus edulis) mushroom that emerged at 11 spatially distant sites

This paper provides data on baseline concentrations, interrelationships and bioconcentration potential of 12 metallic elements by King Bolete collected from 11 spatially distant sites across Poland. There are significant differences in concentrations of metals (Al, Ba, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Sr, Zn) and their bioconcentration potential in King Bolete Boletus edulis at 11 spatially distant sites surveyed across Poland. These have resulted from significant geographical differences in trace metal concentrations in a layer (0-10 cm) of organic and mineral soil underneath to fruiting bodies and possible local bioavailabilities of macro- (Ca, K, Mg, Na) and trace metals (Al, Ba, Cd, Cu, Fe, Mn, Sr, Zn) to King Bolete. The use of highly appreciated wild-grown edible King Bolete mushroom has established a baseline measure of regional minerals status, heavy metals pollution and assessment of intake rates for wild mushroom dish fanciers against which future changes can be compared. Data on Cd, Cu and Zn from this study and from literature search can be useful to set the maximum limit of these metals in King Bolete collected from uncontaminated (background) areas. In this report also reviewed are data on Al, Ba, Ca, Cd, Cu, Fe, K, Mg, Mn, Na, Sr and Zn accumulation in King Bolete.