Walking in the Irish countryside: landowner preferences and attitudes to improved public access provision

This paper explores the attitudes of landowners across Ireland to the wider provision of public access for recreational walking using a multinomial logit model. The study also investigates the level of compensation required to improve the supply of this public good. Results indicate that 51% of landowners are not willing to provide access (non-providers), 21% are willing to provide access free of charge (free providers) and 28% seek compensation (willing providers). The findings indicate that participation by landowners in a proposed public access scheme is influenced by landowners' experience with walkers, farm type, farm insurance costs, household demographics, regional variations, opportunity cost of land and participation in other agri-environment schemes. Mean willingness-to-accept for landowners willing to facilitate improved public access for walking was found to be €0.27 per metre of walkway.     

Exploring the risk information gap. Research into information supply and information demand of different parties concerned

The Dutch National Institute for Public Health and the Environment (RIVM), a governmental research institute, provides information on environmental and health risks. The primary contractors’ information demands are served well. But the risk information available from the RIVM does not always correspond to the desires and requirements of other parties concerned. It became apparent that – to a certain extent – an information gap exists, arising from a difference between the institute’s information supply and the information demand of the different parties concerned.This explorative study focuses on the information demand and supply with regard to three different risks: flooding by rivers, air pollution and food related risks.For each risk, the information supply was determined by listing the available risk information in RIVM reports. In a second step, the information demand of the five different parties, as well as different channels of communication, were examined. The parties’ perceptions and requirements concerning risk information were identified in interviews and focus group discussions.The public, which in general appeared to be quite unfamiliar with the institute and its information sources, preferred risk information tailored to its personal circumstances. Policy makers mainly appreciated personal contacts in order to keep up to date on risk topics, whereas NGOs and fellow researchers judged the institute’s website and reports to be more relevant. Press releases appeared to add little to satisfying the information demand of the media.     

Green Toxicology: a strategy for sustainable chemical and material development

Green Toxicology refers to the application of predictive toxicology in the sustainable development and production of new less harmful materials and chemicals, subsequently reducing waste and exposure. Built upon the foundation of “Green Chemistry” and “Green Engineering”, “Green Toxicology” aims to shape future manufacturing processes and safe synthesis of chemicals in terms of environmental and human health impacts. Being an integral part of Green Chemistry, the principles of Green Toxicology amplify the role of health-related aspects for the benefit of consumers and the environment, in addition to being economical for manufacturing companies. Due to the costly development and preparation of new materials and chemicals for market entry, it is no longer practical to ignore the safety and environmental status of new products during product development stages. However, this is only possible if toxicologists and chemists work together early on in the development of materials and chemicals to utilize safe design strategies and innovative in vitro and in silico tools. This paper discusses some of the most relevant aspects, advances and limitations of the emergence of Green Toxicology from the perspective of different industry and research groups. The integration of new testing methods and strategies in product development, testing and regulation stages are presented with examples of the application of in silico, omics and in vitro methods. Other tools for Green Toxicology, including the reduction of animal testing, alternative test methods, and read-across approaches are also discussed.     

Copper kinetics and internal distribution in the marbled crayfish (Procambarus sp.)

Metal pollution e.g. copper, in water bodies occurs worldwide. Although copper is an essential trace metal, at certain levels it is still considered as pollutant. The aim of this study was to investigate the effect of exposure concentration on copper bioaccumulation in marbled crayfish (Procambarus sp.) by determining uptake and elimination kinetics. Crayfish were exposed to sub-lethal copper concentrations (average measured concentrations of 0.031 and 0.38 mg Cu L⁻¹) for 14 d and transferred to copper-free water for another 14 d. At different time points during the uptake and elimination phases copper concentrations were measured in five organs (exoskeleton, gills, muscle, ovaries and hepatopancreas). At 0.031 mg Cu L⁻¹, copper levels in the crayfish organs were not significantly increased compared to the control animals, suggesting effective regulation. Exposure to 0.38 mg Cu L⁻¹ did lead to not significantly increased copper levels in muscles and ovaries, while the gills and exoskeleton, which are in direct contact with the water, showed significantly higher copper concentrations. In these four organs, copper showed fast uptake kinetics with equilibrium reached within 10 d of exposure. Copper accumulation was highest in the hepatopancreas; uptake in this storage organ steadily increased with time and did not reach equilibrium within the 14-d exposure period. Copper accumulation levels in the marbled crayfish found in this study were hepatopancreas > gills > exoskeleton > muscle.     

Investigating phosphorus limitation in a fixed bed filter with phosphorus and nitrogen profile measurements

In 2000, the European Union adopted the European Water Framework Directive (WFD) (European Commission, 2000). The WFD focuses on increasingly stringent nutrient standards including ultra low nitrogen (< 2.2 mg N-total/L) and phosphorus concentrations (< 0.15 mg total phosphorus/L) in receiving surface waters and in relevant point sources like wastewater treatment plant (WWTP) effluent. Expansion of WWTPs with advanced post-treatment processes, like effluent filtration, is widely proposed to meet possible future effluent discharge standards. When combining biological nitrate-nitrogen and chemical phosphorus removal in one filter, phosphorus limitation in the denitrifying process may occur. This study investigated where in the filter bed and under which conditions phosphorus limitation occurs. Profile measurements for nitrate, nitrite, and orthophosphorus (PO4-P) combined with chemical oxygen demand (COD) and 02 were conducted. Results showed that the required PO4-P/NOx-N ratio is approximately 0.006 mg/mg after phosphorous precipitation and flocculation. Profile measurements have proven to be an applicable and useful tool. It showed how nitrate and orthophosphorus are removed through the filter bed based on the PO4-P/NOx-N ratio. When orthophosphorus is removed more rapidly and efficiently compared to nitrate, the PO4-P/NOx-N ratio decreases. When PO4-P/NOx-N ratio thresholds are approximately 0.006 mg/mg for a certain period of time and water temperatures varied significantly, orthophosphorus limitation may occur. Changing the filter-bed configuration or decreasing the coagulant dosage can prevent limitation of the denitrifying process because of a phosphorous shortage.     

Investigation of an Escherichia coli environmental benchmark for waterborne pathogens in agricultural watersheds in Canada

Canada's National Agri-Environmental Standards Initiative sought to develop an environmental benchmark for low-level waterborne pathogen occurrence in agricultural watersheds. A field study collected 902 water samples from 27 sites in four intensive agricultural watersheds across Canada from 2005 to 2007. Four of the sites were selected as reference sites away from livestock and human fecal pollution sources in each watershed. Water samples were analyzed for Campylobacter spp., Salmonella spp., Escherichia coli O157:H7, Cryptosporidium spp., Giardia spp., and the water quality indicator E. coli. The annual mean number of pathogen species was higher at agricultural sites (1.54 ± 0.07 species per water sample) than at reference sites (0.75 ± 0.14 species per water sample). The annual mean concentration of E. coli was also higher at agricultural sites (491 ± 96 colony-forming units [cfu] 100 mL(-1)) than at reference sites (53 ± 18 cfu 100 mL(-1)). The feasibility of adopting existing E. coli water quality guideline values as an environmental benchmark was assessed, but waterborne pathogens were detected at agricultural sites in 80% of water samples with low E. coli concentrations (<100 cfu 100 mL(-1)). Instead, an approach was developed based on using the natural background occurrence of pathogens at reference sites in agricultural watersheds to derive provisional environmental benchmarks for pathogens at agricultural sites. The environmental benchmarks that were derived were found to represent E. coli values lower than geometric mean values typically found in recreational water quality guidelines. Additional research is needed to investigate environmental benchmarks for waterborne pathogens within the context of the "One World, One Health" perspective for protecting human, domestic animal, and wildlife health.     

Ozonation of oil sands process water removes naphthenic acids and toxicity

Naphthenic acids are naturally-occurring, aliphatic or alicyclic carboxylic acids found in petroleum. Water used to extract bitumen from the Athabasca oil sands becomes toxic to various organisms due to the presence of naphthenic acids released from the bitumen. Natural biodegradation was expected to be the most cost-effective method for reducing the toxicity of the oil sands process water (OSPW). However, naphthenic acids are poorly biodegraded in the holding ponds located on properties leased by the oil sands companies. In the present study, chemical oxidation using ozone was investigated as an option for mitigation of this toxicity. Ozonation of sediment-free OSPW was conducted using proprietary technology manufactured by Seair Diffusion Systems Inc. Ozonation for 50min generated a non-toxic effluent (based on the Microtox bioassay) and decreased the naphthenic acids concentration by approximately 70%. After 130min of ozonation, the residual naphthenic acids concentration was 2mgl(-1): <5% of the initial concentration in the filtered OSPW. Total organic carbon did not change with 130min of ozonation, whereas chemical oxygen demand decreased by approximately 50% and 5-d biochemical oxygen demand increased from an initial value of 2mgl(-1) to a final value of 15mgl(-1). GC-MS analysis showed that ozonation resulted in an overall decrease in the proportion of high molecular weight naphthenic acids (n> or = 22).